CONSTRUCTION OF S.P. OFFICE BUILDING (G + 3 STRUCTURE) AT BEGUSARAI IN THE DISTRICT OF BEGUSARAI - WITH ELECTRIFICATION

Name of the Work: CONSTRUCTION OF S.P. OFFICE BUILDING (G + 3 STRUCTURE) AT BEGUSARAI IN THE DISTRICT OF BEGUSARAI - WITH ELECTRIFICATION

NIT: e NIT 16/SBD/2026-27

Date of Download BOQ 2026-08-11T00:00:00Z

Last date of Download BOQ 2026-08-25T00:00:00Z

Last Date of Upload Tender: 2026-08-27T00:00:00Z

Duration of work ( Months ) 12

Amount of Boq: 71254924

Name of Contractor

Mobile No. & e mail Id.

1 Bid Security amount in Rs.

a Instrument Type

Date of Issue/Pledge to Nigam

b Instrument Type

Date of Issue/Pledge to Nigam

c Instrument Type

Date of Issue/Pledge to Nigam

d Instrument Type

Date of Issue/Pledge to Nigam

e Instrument Type

Date of Issue/Pledge to Nigam

Required bid security Amount in Rs.

2 a Legal Status of Bidder

2 b Place of Registration

2 c Principal Place of Business

2 d Power of Attorney for Signatory Bid.

3 As Per Financial Statement duly certified by a Chartered Accountant about Annual Turnover of Work Contract Payment. Mandatory i.e. 4.5 clause (A) (a) Page no.-10)

4 Annual Profit as per duly audited Financial Statement. ( Mandatory i.e. 4.5 clause (A) (a) Page no.-10)

5 Amount in Rupees related to Work Experience of Similar nature work. (Mandatory i.e. 4.5 clause (A) (b) Page no.-10)

5 a Satisfactory completed at least one similar work of value not less than 50% of estimated cost. 0

5 b Total Requirement Value (50% of BOQ)

6 Executed in any one year , the minimum quantities/ amount of the following items of work

Items Minimum Qnty Actual Qnty done

Qnty Unit Qnty Unit

6 a Earth Work + Sand filling work 1547.45 cum cum

6 b Brick Work 300.38 cum cum

6 c RCC + PCC 0.400 cum cum

6 d Stone And Tile Flooring 1504.11 sqm sqm

6 e Aluminum Work - sqm sqm

6 f Intergral/ waterproofing work with A.P.P Sheet - sqm sqm

6 g Water Supply & Sanitation work 6.25 Rs. In Lac. Rs. In Lac.

6 h Electrical work 28.21 Rs. In Lac. Rs. In Lac.

6 i Steel Truss - m.t m.t

Mandatory i.e. 4.7 clause Page no.-12)

7 BID CAPACITY (as certified by the contractor)

7 a Amount of Existing commitments and ongoing works in Rs with duly affidavit & issued by proper authority.(Not less than Executive Engineer)

Details of Existing Commitments during next Two Years to be completed (balance amount)

i Name of Commitments (Project)

ii Name of Commitments (Project)

iii Name of Commitments (Project)

iv Name of Commitments (Project) 0

v Name of Commitments (Project)

7 b Amount of Work for which Bid already submitted in Rupees

ii Name of Work

iii Name of Work

iv Name of Work

8 Type of Equipment in possession Building Contract Package Size **

Rs. 2- 5 Crores Rs. 5- 20 Crores Rs.20-50 Crores Above 50 Crores

8 a Concrete Mixer with Integral weigh Batching facility 1 2 - -

8 b Concrete Batching & Mixing plant Minimum capacity 15m3/hr . - - 1 2

8 c Pump for concreting (Optional) - - 1 2

8 d Transit Mixture - - 1 2

8 e Vibrator (Plate & Niddle) 2 4 5 6

8 f Water Tanker 1 1 2 3

8 g Steel shuttering 2000sft 3000sft 10000sft more than 10000sft

9 List of Key Personnel to be deployed on Contract Work

9 Personnel*- Qualification Rs. 2-10 Crores Rs. 10-30 Crores Rs. 31-50 Crores More than 50 Crores

9 a Project Manager/ B.E. Civil + 10 Years Exp. (5 years as Manager) or retired E.E. 1 No. 1 No. 1 No.

9 b Site Engineer/ B.E. Civil + 07 Years Exp. (3 years in Building Construction) or retired A.E. 1 No. 2 Nos. 2 Nos. 4 Nos.

9 c Plant Engineer/B.E. Mech./ Civil + 05 Years Exp. or Dip. Mech + 07 Years Exp. or Retired J.E. 1 No. 1 No. 1 No. 2 Nos.

9 d Quality Engineer /B.E. Civil + 05 Years Exp. or Dip. Civil + 07 Years Exp. 1 No 1 No. 2 Nos.

9 e Soil & Material Engineer/ B.E. Civil + 07 Years Exp. 1 no. 1 No. 2 Nos.

9 f Survey Engineer/B.E. Civil + 03 Years Exp. or Dip. Civil + 05 Years Exp. 1 No. 2 Nos.

9 g upervisor JE /Fresh Graduate in Civil or Diploma Civil + 03 Years Exp. 1 Nos. 3 Nos. 3 Nos. 4 Nos.

Total 3 5 10 17

10 Evidence of access to or availability of credit facilities (10% of estimated cost ) , certified by bankers (Mandatory i.e-4.2 Clause (I) of 1TB Page No.-31)

Certified Credit Limit in Rs

ii Name of bank

Certified Credit Limit in Rs

iii Name of bank

Certified Credit Limit in Rs

iv Name of bank

Certified Credit Limit in Rs

Certified Credit Limit in Rs

11 The proposed methodology and programme of construction, backed with equipment planning and deployment

12 Litigation History

13 Regarding statements made in the required attachments are true and correct. Mandatory

14 Able to invest a minimum of cost up to 25% of contract value of work. During implementation of contract.(Mandatory i.e-4.2 Clause (I) of 1TB Page No.-33)

15 Time of Completion in months

16 Registration No

19 Character Certificate (with Letter No. Letter Date, Issuing Office)

20 Electrical License Validity upto (in case of sub-contractors affedevit of both the parties)

21 NOC for Debar (if required)

Junior Engineer Asstt. Engineer Executive Engineer Superintending Engineer, Work Circle-1

BILL OF QUANTITY FOR THE CONSTRUCTION OF S.P. OFFICE BUILDING (G + 3 STRUCTURE) AT BEGUSARAI IN THE DISTRICT OF BEGUSARAI,

Building Portion

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 1179.555 123.9

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 0.800 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

3 R.C.D. S/R 22 3.06 Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m (including royality @ Rs. 22.00 per cum but excluding watering, rolling & compaction) Cum 1179.555 103.42 Rs. One Hundred Three And Fourty Two Paise Only

4 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 0.599 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

5 4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Cu.M 0.000 3434 Rs. Three Thousand Four Hundred Thirty Four Only

6 4.12 Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers. Per 50 kg. cement 216 57.16 Rs. Fifty Seven And Sixteen Paise Only

7 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. Sq.m 418.34 211.6

8 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roots, landings, balcnies and access platform. Sq.m 1631.77 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

9 5.9.4 Centring and shuttering including strutting, propping etc. and removal of form for: Shelves (Cost in situ) Sq.m 136.99 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

10 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 1708.32 404.7 Rs. Four Hundred Four And Seventy Paise Only

11 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 1567.59 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

12 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for: Stairs,(excluding landings) except spiral-staircaces. Sq.m 79.37 439.9 Rs. Four Hundred Thirty Nine And Ninety Paise Only

13 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade,Chajjas, corbels etc. including edges Sq.m 135.59 550.9 Rs. Five Hundred Fifty And Ninety Paise Only

14 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 23910.89 94.5 Rs. Ninety Four And Fifty Paise Only

15 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 22601.32 92.6 Rs. Ninety Two And Sixty Paise Only

16 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 10839.33 90.8 Rs. Ninety And Eighty Paise Only

17 5.22.7D Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 16mm dia. KG 23374.65 91.7 Rs. Ninety One And Seventy Paise Only

18 5.22.7E Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 20 mm dia. KG 25524.1 91.7 Rs. Ninety One And Seventy Paise Only

19 5.22.7F Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 25 mm dia. KG 55723.26 91.7 Rs. Ninety One And Seventy Paise Only

20 5.22.7H Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 32 mm dia. KG 587 91.7 Rs. Ninety One And Seventy Paise Only

21 5.33A.1+ 5.33.B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:Add or deduct for providing richer or leaner mixes respectively at all floor levels: Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 322.8 4921.4 Rs. Four Thousand Nine Hundred Twenty One And Fourty Paise Only

22 5.33A.2.1+ 5.33B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts: Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 192.23 5458 Rs. Five Thousand Four Hundred Fifty Eight Only

23 5.33A.2.2 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. Cu.m 14.95 5677.2 Rs. Five Thousand Six Hundred Seventy Seven And Twenty Paise Only

24 5.33A.2.2+ 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.:Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 370.8 5841.7 Rs. Five Thousand Eight Hundred Fourty One And Seventy Paise Only

25 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 41.69 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

26 6.1.14C+ 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) : Extra tor Brick work in superstructure above plinth level upto floor V cum Cu.M 443.46 5765.2 Rs. Five Thousand Seven Hundred Sixty Five And Twenty Paise Only

27 6.45.1 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. Cement mortar 1 : 3 (1 cement : 3 coarse sand) sqm 181.99 723 Rs. Seven Hundred Twenty Three Only

28 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base, the drain duly. plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. but excluding carriage cost of bricks, sand and jhama metal. Per M 64.92 1087.9 Rs. One Thousand Eighty Seven And Ninety Paise Only

29 8.2.1.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Rajnagar plain white marble /Udaipur green marble/Zebra block marble:Area of slab up to 0.50 sqm. Sq.M 411.73 2458 Rs. Two Thousand Four Hundred Fifty Eight Only

30 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 0.399 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

31 9.96.1 Providing and fixing alluminium sliding door bolt anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to rquired colour and shade with nuts and screws etc. complete : 300 x 16mm Each 47 235.5 Rs. Two Hundred Thirty Five And Fifty Paise Only

32 9.97.1 Providing and fixing alluminium sliding tower bolt anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with nuts and screws etc. complete : 300 x 10mm Each 94 111.4 Rs. One Hundred Eleven And Fourty Paise Only

33 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete: 125mm Each 188 57.1 Rs. Fifty Seven And Ten Paise Only

34 9.101.2 Providing and fixing alluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete : Twin rubber stopper Each 47 60.8 Rs. Sixty And Eighty Paise Only

35 9.147B.1 Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. Sq.M 18.59 6690.7 Rs. Six Thousand Six Hundred Ninety And Seventy Paise Only

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

36 9.147D.2 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. Sq.M 0.199 9471 Rs. Nine Thousand Four Hundred Seventy One Only

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

37 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. Sq.M 5.44 6303.4 Rs. Six Thousand Three Hundred Three And Fourty Paise Only

38 10.17 Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete. Each 60 174.6 Rs. One Hundred Seventy Four And Sixty Paise Only

39 10.32.2 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc as required: In gratings, frames, guard bar, ladders, railing, brackets, gets & similar works. KG 147 114.6 Rs. One Hundred Fourteen And Sixty Paise Only

40 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). Kg 1767.18 546.8 Rs. Five Hundred Fourty Six And Eighty Paise Only

41 11.3.1 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm nominal size stone aggregate Sq.M 0.000 289.1 Rs. Two Hundred Eighty Nine And Ten Paise Only

42 11.20.1 Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand) : Light shade using white cement. Sq.M 269.485 1053.6 Rs. One Thousand Fifty Three And Sixty Paise Only

43 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Sq.M 362.13 795

44 11.37 Providing and laying Ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. Sq.M 0.200 686.8 Rs. Six Hundred Eighty Six And Eighty Paise Only

45 11.41.2 Providing and laying vitrifed floor tiles in different sizes { thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete: Size of Tile 60 x 60 cm. Sq.M 1654.83 1638.8 Rs. One Thousand Six Hundred Thirty Eight And Eighty Paise Only

46 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete : Size of Tile 600 x 600 mm. Sq.M 133.65 1191.8 Rs. One Thousand One Hundred Ninety One And Eighty Paise Only

47 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 1498.4 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

48 11.73 + 13.57.1 Providing designation 100A one brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.including flush pointing on brick flooring with cement mortar 1:3( 1cement: 3 coarse sand). Sq.M 0.999 537.5 Rs. Five Hundred Thirty Seven And Fifty Paise Only

49 12.58X.1 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, Sq.M 331.7 1608.2 Rs. One Thousand Six Hundred Eight And Twenty Paise Only

required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.

50 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 117.6 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

51 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 10 132 Rs. One Hundred Thirty Two Only

52 12.79.6.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Shoe Each 10 115.95 Rs. One Hundred Fifteen And Ninety Five Paise Only

53 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 118 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

54 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 6174.9 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

55 13.13.1+ 13.36.5 Cement plaster in coarse sand : 20mm cement plaster of mix : 1:3(1cement : 3 coarse sand) :Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 20mm cement plaster 1:3 (1 cement : 3 sand) Sq.M 0.000 240.4 Rs. Two Hundred Fourty And Fourty Paise Only

56 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 0.999 203.6 Rs. Two Hundred Three And Sixty Paise Only

57 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 1740.31 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

58 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.M 1611.78 137 Rs. One Hundred Thirty Seven Only

59 13.77.2 Distempering with oil bound washable distemper of approved brand and manufacture to give and even shade: New work (two or more coats) over and including priming coat with cement primer Sq.M 6303.43 102.3 Rs. One Hundred Two And Thirty Paise Only

60 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.M 7915.21 105.4 Rs. One Hundred Five And Fourty Paise Only

61 13.82.1+ 13.81.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) :Applying primer coat : With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works Sq.M 351.04 118.1 Rs. One Hundred Eighteen And Ten Paise Only

62 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.M 246.93 84.5

63 26.1 Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, minimum 1800mm length and minimum 100 mm wide , in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polythylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bomboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge. sqm 340.05 5263 Rs. Five Thousand Two Hundred Sixty Three Only

64 26.6E.1 Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in- Charge. 9mm thickness sqm 493.91 4368.2 Rs. Four Thousand Three Hundred Sixty Eight And Twenty Paise Only

65 26.86.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs /SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 85 mm Meter 349.75 768.1 Rs. Seven Hundred Sixty Eight And Ten Paise Only

66 26.88.2 Providing and fixing factory made single extruded WPC {Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm', modulus of elasticity 850 N/mm' and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk 5.5 screws, all as per direction of Engineer-In- Charge. {Note: stainless steel butt hinges and necessary 5.5 screws shall be paid separately) 35 mm thick sqm 0.000 4803.1 Rs. Four Thousand Eight Hundred Three And Ten Paise Only

67 Br Sl.No. 7239 Supplying Epoxy paint Liter 215.49 249.72 Rs. Two Hundred Fourty Nine And Seventy Two Paise Only

68 Extra cost of brick 100A (a) Munger Per %o 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

69 Extra cost of slag cement Munger Per bag 14570 0.81 Rs. And Eighty One Paise Only

70 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.400 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

71 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 0.600 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

72 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 0.799 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

73 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.400 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Four Crore Sixty Lakh Twenty Five Thousand Two Hundred Fifty Only

Numbers of item 72 (Seventy two)

Note :- (1) All types of brick-work, concrete work, plaster work, flooring and other cement related items of work include cost of curing and execution of works will be as per guidance of National Building code and direction of E/I. (2) NOTHING EXTRA repeat NOTHING EXTRA shall be paid on account of carriage and no claim whatsoever shall be entertained in this respect. If actual lead is less than above mentioned lead payment will be made as per actual lead.

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 50.77 360.7

2 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 3.74 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

3 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level : 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)( Foundation, Band at P.L.& S.Tank Cover) Cu.M 0.000 4232.4 Rs. Four Thousand Two Hundred Thirty Two And Fourty Paise Only

4 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 122 94.5 Rs. Ninety Four And Fifty Paise Only

5 6.1.12C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4(1 cement : 4 coarse sand) Cu.M 13.23 5116.3 Rs. Five Thousand One Hundred Sixteen And Thirty Paise Only

6 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 3.24 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

7 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 17.28 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

8 12.78.1 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 75mm diameter M 90 162.7 Rs. One Hundred Sixty Two And Seventy Paise Only

9 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 95 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

10 12.79.3.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee with door Each 10 193.4 Rs. One Hundred Ninety Three And Fourty Paise Only

11 12.79.4.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee without door (T. Bend) Each 10 190.7 Rs. One Hundred Ninety And Seventy Paise Only

12 12.79.5.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm dia Plain bend Each 10 91.8 Rs. Ninety One And Eighty Paise Only

13 12.79.5.2+ 12.81 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 mm Floor trap Each 10 179.9 Rs. One Hundred Seventy Nine And Ninety Paise Only

14 12.80.1 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 75mm dia clip Each 70 184.1 Rs. One Hundred Eighty Four And Ten Paise Only

15 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 75 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

16 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 0.000 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

17 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 42.94 203.6 Rs. Two Hundred Three And Sixty Paise Only

18 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 15.45 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

19 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 8 4470.9 Rs. Four Thousand Four Hundred Seventy And Ninety Paise Only

20 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 12 4230 Rs. Four Thousand Two Hundred Thirty Only

21 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 16 3723.2 Rs. Three Thousand Seven Hundred Twenty Three And Twenty Paise Only

22 17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 22 2764.4 Rs. Two Thousand Seven Hundred Sixty Four And Fourty Paise Only

23 18.76.1 Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks Each 55 198.5 Rs. One Hundred Ninety Eight And Fifty Paise Only

24 19.15.1 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar Each 12 310.9 Rs. Three Hundred Ten And Ninety Paise Only

25 19.19.1.1 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality:LD 2.5:Rectangular shape 600x450 mm internal dimensions Each 2 1120.6 Rs. One Thousand One Hundred Twenty And Sixty Paise Only

26 19.30.1.1 Constructing brick masonry chamber for underground C.I.Inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg),R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 16 4266.8 Rs. Four Thousand Two Hundred Sixty Six And Eighty Paise Only

27 Br. Providing brick bats and filling the same in soak pit as per specificarion and direction of engineer in charge. Cu.M 11.68 1198.67 Rs. One Thousand One Hundred Ninety Eight And Sixty Seven Paise Only

28 Extra cost of brick 100A (a) Munger Per %o 0.999 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

29 Extra cost of slag cement Munger Per bag 66 0.81 Rs. And Eighty One Paise Only

30 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 12.2 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

31 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 6.84 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

32 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 4.88 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

Rs. Five Lakh Sixty Thousand Two Hundred Seventy Nine Only

Numbers of item 32 (Thrity two )

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 22 1068.5

2 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 22 713.3 Rs. Seven Hundred Tthirteen And Thirty Paise Only

3 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 22 146.3 Rs. One Hundred Fourty Six And Thirty Paise Only

4 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms. Each 22 204.7 Rs. Two Hundred Four And Seventy Paise Only

5 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms Each 22 424 Rs. Four Hundred Twenty Four Only

6 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 15 mm nominal outer dia Pipes M 95.4 278.2 Rs. Two Hundred Seventy Eight And Twenty Paise Only

7 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 20 mm nominal outer dia Pipes M 61 350.8 Rs. Three Hundred Fifty And Eighty Paise Only

8 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:25 mm nominal outer dia Pipes M 56.4 294.7 Rs. Two Hundred Ninety Four And Seventy Paise Only

9 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:32 mm nominal outer dia Pipes M 45.4 359.1 Rs. Three Hundred Fifty Nine And Ten Paise Only

10 18.9.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:40 mm nominal outer dia Pipes M 25 477.6 Rs. Four Hundred Seventy Seven And Sixty Paise Only

11 18.10.4 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc:Internal work - Exposed on wall:32 mm dia nominal bore M 20 457.8 Rs. Four Hundred Fifty Seven And Eighty Paise Only

12 18.15.1 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Each 42 303.8 Rs. Three Hundred Three And Eighty Paise Only

13 18.16.1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore Each 42 303.8 Rs. Three Hundred Three And Eighty Paise Only

14 18.16.2 Providing and fixing brass stop cock of approved quality :20 mm nominal bore Each 42 328 Rs. Three Hundred Twenty Eight Only

15 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore Each 12 532.3 Rs. Five Hundred Thirty Two And Thirty Paise Only

16 18.19.2.2 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore:Vertical Each 12 777.9 Rs. Seven Hundred Seventy Seven And Ninety Paise Only

17 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter Each 6 190.1 Rs. One Hundred Ninety And Ten Paise Only

18 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per Litre 6000 9.7 Rs. Nine And Seventy Paise Only

Rs. Two Lakh Seventy Two Thousand Five Hundred Sixty Seven Only

Numbers of item 18 (Eighteen)

Deep Tubewell - 2 Nos

ESTIMATED AMOUNT : Rs.

SlNO SRIN DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS AMOUNT

1 18.12.4 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc:External work:32 mm dia nominal bore M 24.4 381.7

2 24.2.1.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of allequipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level:All type of soil:300 mm dia M 106.68 567.9 Rs. Five Hundred Sixty Seven And Ninety Paise Only

3 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia M 86.68 660.1 Rs. Six Hundred Sixty And Ten Paise Only

4 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge:150 mm nominal size dia M 20 673.5 Rs. Six Hundred Seventy Three And Fifty Paise Only

5 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-incharge. Cum 5.652 1343.2 Rs. One Thousand Three Hundred Fourty Three And Twenty Paise Only

6 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hour 12 916.8 Rs. Nine Hundred Sixteen And Eighty Paise Only

7 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:150 mm dia Each 1 210.7 Rs. Two Hundred Ten And Seventy Paise Only

8 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:150 mm clamp Each 1 1531.4 Rs. One Thousand Five Hundred Thirty One And Fourty Paise Only

9 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I): 150 mm dia Each 1 281.8 Rs. Two Hundred Eighty One And Eighty Paise Only

10 Supplying, fitting & fixing submersible motor pump (1 H.P.) of Crompton or any other approved I.S.I. make complete with cable wire, fited & fixed complete as per specification and direction of Engineer I/C with all accesories etc. all complete job. Per Set 1 13500 Rs. Tthirteen Thousand Five Hundred Only

11 Supplying 1 HP fully automatic Crompton single phase 220 volts starter on a common board with 16 amps Havels make DP main switch 1 No. suitable voltameter (ISI make ) 1 No. ampere meter (ISI make) 1 no, complete with panel all taxes etc. complete job. Per Set 1 2450 Rs. Two Thousand Four Hundred Fifty Only

Rs. Three Lakh Fifty Four Thousand Three Hundred Four Only

Numbers of item 11 (Eleven)

Compound Wall- 600 Rft

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 31.72 360.7

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 3.17 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

3 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 42.03 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

4 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 24.85 404.7 Rs. Four Hundred Four And Seventy Paise Only

5 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 45.58 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

6 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 467.73 94.5 Rs. Ninety Four And Fifty Paise Only

7 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 623.65 92.6 Rs. Ninety Two And Sixty Paise Only

8 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 467.73 90.8 Rs. Ninety And Eighty Paise Only

9 5.33A.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level Cu.m 7.8 4756.9 Rs. Four Thousand Seven Hundred Fifty Six And Ninety Paise Only

10 5.33A.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts Cu.m 4.13 5293.5 Rs. Five Thousand Two Hundred Ninety Three And Fifty Paise Only

11 5.33A.2.2 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. Cu.m 2.8 5677.2 Rs. Five Thousand Six Hundred Seventy Seven And Twenty Paise Only

12 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 0.999 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

13 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 520 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

14 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 27.45 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

15 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 205.95 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

16 13.46.A1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coat applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior. Sq.M 205.95 132.5 Rs. One Hundred Thirty Two And Fifty Paise Only

17 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.M 43.49 84.5 Rs. Eighty Four And Fifty Paise Only

18 Extra cost of brick 100A (a) Munger Per %o 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

19 Extra cost of slag cement Munger Per bag 153 0.81 Rs. And Eighty One Paise Only

20 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.999 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

21 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 0.000 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

22 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 0.999 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

23 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.000 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Total of 100 Rft

Total of 600 Rft

Rs. Thirty Three Lakh Twenty Six Thousand Eight Hundred Fourty Only

Numbers of item 23 (Twenty three)

Main Gate - 2 No

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 8.83 360.7

2 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 8.83 123.9 Rs. One Hundred Twenty Three And Ninety Paise Only

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 0.68 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

4 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 12.9 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

5 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth, bams, griders, bressumers and contilevers. Sq.m 0.000 404.7 Rs. Four Hundred Four And Seventy Paise Only

6 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 11.78 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

7 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 0.999 94.5 Rs. Ninety Four And Fifty Paise Only

8 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 213.24 90.8 Rs. Ninety And Eighty Paise Only

9 5.22.7D Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 16mm dia. KG 94.42 91.7 Rs. Ninety One And Seventy Paise Only

10 5.33A.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level Cu.m 0.000 4756.9 Rs. Four Thousand Seven Hundred Fifty Six And Ninety Paise Only

11 5.33A.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts Cu.m 1.57 5293.5 Rs. Five Thousand Two Hundred Ninety Three And Fifty Paise Only

12 10.32.2 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc as required: In gratings, frames, guard bar, ladders, railing, brackets, gets & similar works. KG 1398 114.6 Rs. One Hundred Fourteen And Sixty Paise Only

13 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 0.000 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

14 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 11.78 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

15 13.46.A1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coat applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior. Sq.M 11.78 132.5 Rs. One Hundred Thirty Two And Fifty Paise Only

16 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.M 18.12 84.5 Rs. Eighty Four And Fifty Paise Only

17 Extra cost of brick 100A (a) Munger Per %o 0.15 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

18 Extra cost of slag cement Munger Per bag 27 0.81 Rs. And Eighty One Paise Only

19 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.15 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

20 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 1.51 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

21 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 2.75 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

22 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.75 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Four Lakh Seventy Two Thousand Six Hundred Twenty Two Only

Numbers of item 22 (Twenty two)

Campus Development

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.25(a) Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead. cum 438.4 411.7 Rs. Four Hundred Eleven And Seventy Paise Only

2 11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Sq.M 1299.26 721.1 Rs. Seven Hundred Twenty One And Ten Paise Only

Rs. Eleven Lakh Seventeen Thousand Three Hundred Eighty Six Only

Numbers of item 2 (Two)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 108 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

2 4.1.2 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) Cu.M 120 4420.8 Rs. Four Thousand Four Hundred Twenty And Eighty Paise Only

3 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 96 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

4 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 600 283.3

5 Extra cost of brick 100A (a) Munger Per %o 23.23 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

6 Extra cost of slag cement Munger Per bag 1081 0.81 Rs. And Eighty One Paise Only

7 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 23.23 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

8 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 61.2 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

9 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 122.4 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

10 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 119.02 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Ten Lakh Seventy Five Thousand Nine Hundred Fifty Nine Only

Numbers of item 10 (Ten)

Rain Water Harvesting System

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 3.7 360.7

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 1.63 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

3 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 0.000 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

4 6.1.12C + 6.3C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4(1 cement : 4 coarse sand): Extra for Brick work in superstructure above plinth level upto floor V Cu.M 2.63 5958.5 Rs. Five Thousand Nine Hundred Fifty Eight And Fifty Paise Only

5 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 104.58 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

6 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 3.62 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

7 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 30 257.5

8 12.79.3.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee with door Each 3 193.4 Rs. One Hundred Ninety Three And Fourty Paise Only

9 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 6 132 Rs. One Hundred Thirty Two Only

10 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 14 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

11 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 13.41 203.6 Rs. Two Hundred Three And Sixty Paise Only

12 13.82.1+ 13.81.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) :Applying primer coat : With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works Sq.M 3.24 118.1 Rs. One Hundred Eighteen And Ten Paise Only

13 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge,upto 90 metre depth below ground level:All types of soil:300 mm dia M 10 486.8 Rs. Four Hundred Eighty Six And Eighty Paise Only

14 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia M 5 660.1

15 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge:150 mm nominal size dia M 10 673.5 Rs. Six Hundred Seventy Three And Fifty Paise Only

16 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 0.31 1188.9 Rs. One Thousand One Hundred Eighty Eight And Ninety Paise Only

17 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 0.98 1195.6 Rs. One Thousand One Hundred Ninety Five And Sixty Paise Only

18 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:150 mm dia Each 1 210.7 Rs. Two Hundred Ten And Seventy Paise Only

19 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:150 mm clamp Each 1 1531.4 Rs. One Thousand Five Hundred Thirty One And Fourty Paise Only

20 Extra cost of brick 100A (a) Munger Per %o 0.000 320.57

21 Extra cost of slag cement Munger Per bag 27 0.81 Rs. And Eighty One Paise Only

22 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.999 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

23 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 0.000 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

24 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 0.000 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

25 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.000 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Seventy One Thousand Seven Hundred Fourty Four Only

Numbers of item 25 (Twenty Five)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 1.12 f.s.o.r Plantation work ( 10 gram DAP and pesticide per plant). Transportation of plant and planting work from temporary plant salad. Plantation 20 man days, Transportation of Plant - 6 man days, DAP - 260/- persicide - 100 Rs, etc - 50/- Each 18 0.1

2 3.5.1 F.S.O.R Provision for plant transportion by tractor. Per %o 0.18 1000 Rs. One Thousand Only

3 6.3 f.s.o.r Providing bomboo barricating. Each 18 100 Rs. One Hundred Only

4 6.4.1 f.s.o.r Purchase of earth and round 152.5 [email protected]/cft per % no plants. Each 0.18 1586 Rs. One Thousand Five Hundred Eighty Six Only

5 9.2 f.s.o.r Labour for planting. Each 18 15.7 Rs. Fifteen And Seventy Paise Only

6 9.2.3 f.s.o.r (A) Suppling and providing plants all as following details (10 plant's) Each 12 250 Rs. Two Hundred Fifty Only

7 9.2.3 f.s.o.r (B) Suppling and providing plants all as following details (10 plant's) Each 6 2000 Rs. Two Thousand Only

Rs. Seventeen Thousand Five Hundred Fifty Only

Numbers of item 07 (Seven)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

I PIPING & VALVES

1 7.1 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm dia M 125 359

2 7.4 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50 mm dia M 40 646 Rs. Six Hundred Fourty Six Only

3 7.6 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia M 18 951 Rs. Nine Hundred Fifty One Only

4 7.8 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150 mm dia M 54 1856 Rs. One Thousand Eight Hundred Fifty Six Only

5 11.4 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia Set 6 4588 Rs. Four Thousand Five Hundred Eighty Eight Only

6 11.5 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia Set 12 6056 Rs. Six Thousand Fifty Six Only

7 11.6 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150 mm dia Set 2 8241 Rs. Eight Thousand Two Hundred Fourty One Only

8 14.4 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 80 mm dia Set 2 7287 Rs. Seven Thousand Two Hundred Eighty Seven Only

9 14.5 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100 mm dia Set 4 10478 Rs. Ten Thousand Four Hundred Seventy Eight Only

10 14.7 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150 mm dia Set 2 17300 Rs. Seventeen Thousand Three Hundred Only

II INTERNAL HYDRAN SYSTEM

11 9.2 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel Set 6 5722 Rs. Five Thousand Seven Hundred Twenty Two Only

13 16.2 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless steel (Grade 304) Set 12 4445

14 17.1 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. "Connections from riser with 25 mm dia stop gun metalvalve & M.S. Pipe and socket." 30 m Set 6 7920 Rs. Seven Thousand Nine Hundred Twenty Only

15 NS - 1 Providing and fixing fire hose cabinet fabricated from 16 guage M.S. sheet with double glazed front door and pad locking arrangement, painted fire red with stove enameled fapnt and fire house written on front including necessary supports (to house TWO length of canvas hose with couplings, branch pipe and nozzle) Each 6 7600 Rs. Seven Thousand Six Hundred Only

16 18.2 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Stainless steel (Grade 304) Nos 6 1631 Rs. One Thousand Six Hundred Thirty One Only

17 NS - 2 Providing and fixing 25 mm dia brass ball valve full bore type with lever and screwed female ends. For 20 kg/Sq.cm) Each 6 1722 Rs. One Thousand Seven Hundred Twenty Two Only

18 NS - 3 Providing and fixing 25 mm dia gun metal single acting air release valve with screwed inlet tested. For 20 kg/Sq.cm) Each 2 1722 Rs. One Thousand Seven Hundred Twenty Two Only

19 NS - 4 Providing and fixing dial type pressure guage with isolation cock and chrome coated copper pipe on main headed Dial dia 150 mm calibration 0-15 kg /Sq.cm) Each 4 1722 Rs. One Thousand Seven Hundred Twenty Two Only

20 19.3 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 3 way - 150 mm dia M.S. Pipe Set 1 9071 Rs. Nine Thousand Seventy One Only

III FIRE PUMPS & ACCESSORIES

21 1.9 (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. 1620 lpm at 56 m Head Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm 2 pressure at the highest/farthest point. Set 1 281411

22 3.3 a) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. d) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. e) Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 56 m Head Set 1 80063 Rs. Eighty Thousand Sixty Three Only

23 4.2 Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 (b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head Set 1 84198 Rs. Eighty Four Thousand One Hundred Ninety Eight Only

24 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. Set 1 17707 Rs. Seventeen Thousand Seven Hundred Seven Only

25 NS - 5 Providing and fixing liquid level controller for fire pump to stop fire pumps in case of low level of water in tank, cost of conduit, cable and panel including making connection to pump panel and commissioning complete. a. Floor type senser with panel Each 2 10150 Rs. Ten Thousand One Hundred Fifty Only

26 NS - 5 Providing and fixing liquid level controller for fire pump to stop fire pumps in case of low level of water in tank, cost of conduit, cable and panel including making connection to pump panel and commissioning complete. b. Installation Each 2 1015 Rs. One Thousand Fifteen Only

27 22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. Each 4 1442 Rs. One Thousand Four Hundred Fourty Two Only

IV Panel for Fire Pumps

28 5.1 Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0- 500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A Set 1 248187 Rs. Two Lakh Fourty Eight Thousand One Hundred Eighty Seven Only

OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Jockey Pump 63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.

29 NS - 6 Providing and fixing heavy duty aluminium armored cables 1.1 KVA grade including necessary support clamps at ceiling : Power cable 3 core 16 Sq. mm Meter 74 456 Rs. Four Hundred Fifty Six Only

30 NS - 6 Providing and fixing heavy duty aluminium armored cables 1.1 KVA grade including necessary support clamps at ceiling : Power cable 3.5 core 35 Sq. mm Meter 25 550 Rs. Five Hundred Fifty Only

V FIRE EXTINGUISHERS

31 NS - 7 Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS: 15683 including fixing with dash fasteners etc. complete. Capacity 4.5 kg. Each 3 8500 Rs. Eight Thousand Five Hundred Only

32 NS - 8 welded M.S. cylindrical body, squeeze lever discharge valve, 30 cms long high pressure discharge hose ISI marked as per IS:15683 including fixing to wall with brackets etc. complete. Capacity 6 Kg. Each 6 5400 Rs. Five Thousand Four Hundred Only

VI AUTOMATIC FIRE ALARM SYSTEM AS PER DSR'2025 & Market Rate ( M. R. )

33 NS - 9 Supply, installation, testing and commissioning of conventional fire alarm control panel with visula indication for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS : 2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required with inbuilt battery charger and batteries for emergency back up. 2 Zones capacity. Each 1 18500 Rs. Eighteen Thousand Five Hundred Only

VII AUTOMATIC SPRINKLER SYSTEM

34 21.1 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler : Each 60 408 Rs. Four Hundred Eight Only

35 29 Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required. Each 60 167 Rs. One Hundred Sixty Seven Only

36 R.C.D. S/R 22 3.06 Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m (including royality @ Rs. 22.00 per cum but excluding watering, rolling & compaction) Cum 123.06 103.42 Rs. One Hundred Three And Fourty Two Paise Only

37 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 123.24 123.9 Rs. One Hundred Twenty Three And Ninety Paise Only

38 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 0.000 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

39 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 13.545 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

40 5.9.2 Centring and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc. Sq.m 159.25 375.1 Rs. Three Hundred Seventy Five And Ten Paise Only

41 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roots, landings, balconies and access platform. Sq.m 0.000 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

42 5.9.14 Centring and shuttering including strutting, propping etc. and removal of form for: Extra for shuttering in circular work (20% of respective centring and shuttering items) Sq.m 0.200 20.2 Rs. Twenty And Twenty Paise Only

43 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 1564 92.6 Rs. Ninety Two And Sixty Paise Only

44 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 0.000 90.8 Rs. Ninety And Eighty Paise Only

45 5.33A.1+ 5.33.B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:Add or deduct for providing richer or leaner mixes respectively at all floor levels: Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 25 4921.4 Rs. Four Thousand Nine Hundred Twenty One And Fourty Paise Only

46 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 0.999 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

47 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 163.46 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

48 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions.(ii) 11 nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand) mixed with water proofing compound in recommended proportion, (iii) Illrd course of applying blown or/ residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) Ivth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). Sq.m 163.46 480.6 Rs. Four Hundred Eighty And Sixty Paise Only

49 Br Sl.No. 7239 Supplying Epoxy paint Liter 0.400 249.72 Rs. Two Hundred Fourty Nine And Seventy Two Paise Only

50 Supplying of 7.5 HP Submersibble pump Each 2 125000 Rs. One Lakh Twenty Five Thousand Only

51 Extra cost of brick 100A (a) Munger Per %o 0.000 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

52 Extra cost of slag cement Munger Per bag 301 0.81 Rs. And Eighty One Paise Only

53 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.000 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

54 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 0.999 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

55 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 30 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

56 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.000 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Add GST @ 5.36%

AUTOMATIC FIRE ALARM SYSTEM Total

57 28.1.3 DSR-2025 Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. Each 6 513 Rs. Five Hundred Tthirteen Only

58 28.1.7 DSR-2025 Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. Each 6 530 Rs. Five Hundred Thirty Only

59 28.5.2 DSR-2025 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. Each 350 192 Rs. One Hundred Ninety Two Only

Rs. Twenty Six Lakh Sixty One Thousand One Hundred Fifty One Only

Electrification Work - Police Station

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 1.3.3 Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. Box etc. as required. (a) Group C Per Point 456 1146

2 1.5 Wiring for light/Power plug with 2x4 Sq.mm FR PVC insulated Copper conductor single core cable in surface recessed PVC conduit along with 1 No. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. Per Mtr. 1857 309 Rs. Three Hundred Nine Only

3 1.7.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (2 x2.5mm2 + 1x2.5 mm2 earth wire) Per Mtr. 2422 246 Rs. Two Hundred Fourty Six Only

4 1.7.11 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x6.0 mm2 + 1x6.0mm2) Per Mtr. 197 660 Rs. Six Hundred Sixty Only

5 1.7.12 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x10 mm2 + 1x6 mm2) Per Mtr. 120 925 Rs. Nine Hundred Twenty Five Only

6 1.7.14 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x25 mm2 + 1x6 mm2) Per Mtr. 80 2235 Rs. Two Thousand Two Hundred Thirty Five Only

7 3 *1.24.4+ 3*1.24.1+ 1*1.24.5+ 1*1.24.3+ 1*2.12.1 Supplying and fixing following modula'r switch/ socket on the existing modular plate & switch box including connections but excluding modular plate.etc. as required. 3 pin , 5/6 amps socket outlet, 5/6 amps switch, 6 pin, 15/16 amps socket outlet, 15/16 amps switch Supptying and fixing following rating, 24Al4L5 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required' 6 A to 32'A, Single pole Each 50 1141 Rs. One Thousand One Hundred Fourty One Only

8 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as req u ired. Each 129 358 Rs. Three Hundred Fifty Eight Only

9 1.31 Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection etc. as required. Each 81 414 Rs. Four Hundred Fourteen Only

10 1.32 Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as required. Each 49 531 Rs. Five Hundred Thirty One Only

11 1.33 Supplying and fixing 2 Pin, 5/6 amps ceilling rose on the existing Junction box / wooden block including connection etc. as required. Each 97 64 Rs. Sixty Four Only

12 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 121 80 Rs. Eighty Only

13 1.53 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Each 16 683 Rs. Six Hundred Eighty Three Only

14 2.4.10 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required' 125 A,16 KA, TPMCCB Each 4 5037 Rs. Five Thousand Thirty Seven Only

15 2.4.12 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required' 200 A,16 KA, TPMCCB Each 4 8101 Rs. Eight Thousand One Hundred One Only

16 2.4.16 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required' 315 A, 35 KA, TPMCCB Each 1 22994 Rs. Twenty Two Thousand Nine Hundred Ninety Four Only

17 2.5.3 Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 200 Amps. Each 4 10550 Rs. Ten Thousand Five Hundred Fifty Only

18 2.5.4 Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 315/300 A Each 1 12883 Rs. Twelve Thousand Eight Hundred Eighty Three Only

19 2.7.4 Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 125 A Each 1 12543 Rs. Twelve Thousand Five Hundred Fourty Three Only

20 2.7.8 Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 320 A Each 1 30787 Rs. Thirty Thousand Seven Hundred Eighty Seven Only

21 2.9.1 Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator) 4 way ( 4 + 12 ), Double door, horizontal type Each 17 4184 Rs. Four Thousand One Hundred Eighty Four Only

22 2.12.1 Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6 A to 32'A, Single pole Each 204 237 Rs. Two Hundred Thirty Seven Only

23 2.12.7 Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 40 A to 63 A,.TP Each 6 1859 Rs. One Thousand Eight Hundred Fifty Nine Only

24 2.12.8 Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 40 A to 63 A, TP&N Each 11 2329 Rs. Two Thousand Three Hundred Twenty Nine Only

25 2.18.2 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps Each 16 3348 Rs. Three Thousand Three Hundred Fourty Eight Only

26 2.18.3 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 53 Amps Each 16 3010 Rs. Three Thousand Ten Only

27 2.20. Providing and fixing M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required. Each 5 214 Rs. Two Hundred Fourteen Only

28 2.25 Supplying and fixing 20 amps, 415 volts, TPN industrial type, socket outlet with 4 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Each 12 3008 Rs. Three Thousand Eight Only

29 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. Metre 30 144 Rs. One Hundred Fourty Four Only

30 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required. Set 2 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

31 5.1 Supplying and fixing 4'X18 wat[ LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. Each 72 521 Rs. Five Hundred Twenty One Only

32 5.8.3 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 Im/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 18 watt Each 94 1694 Rs. One Thousand Six Hundred Ninety Four Only

33 5.9 Supplying and fixing recess mounted 36 watt LED flat panel (2' X 2') with minimum efficacy 100 lm/w which privides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. Each 23 2663 Rs. Two Thousand Six Hundred Sixty Three Only

34 5.14.4 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 90 watt Each 9 5516 Rs. Five Thousand Five Hundred Sixteen Only

35 5.15.7 Supplying and fixing fotrlowing types LED Flood light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on poleibuilding including connection earthing the body etc as required 200 watt Each 4 10495 Rs. Ten Thousand Four Hundred Ninety Five Only

36 6.1.4 Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required. 9/10 watt LED lamp Each 121 161 Rs. One Hundred Sixty One Only

37 7.2.3 Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq. mm and upto 185 sq. mm Metre 90 243 Rs. Two Hundred Fourty Three Only

38 7.7.12 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 120 sq. mm, 3.5 core Metre 100 1186 Rs. One Thousand One Hundred Eighty Six Only

39 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) Sq.Ft 56 1809 Rs. One Thousand Eight Hundred Nine Only

40 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. Each 5 6536 Rs. Six Thousand Five Hundred Thirty Six Only

41 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 129 2482 Rs. Two Thousand Four Hundred Eighty Two Only

42 8.17.1 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 300 mm sweep Each 17 2572 Rs. Two Thousand Five Hundred Seventy Two Only

43 BR Code 1824 Supplying 20 mm X 3 mm copper tape ( 0.533 kg/mtr) KG 10 710.84 Rs. Seven Hundred Ten And Eighty Four Paise Only

44 7.7.9 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 50 sq. mm, 3.5 core Metre 80 561 Rs. Five Hundred Sixty One Only

45 Approved by SE 14.07.2026 Supplying installation and commissioning of silent type, air cooled 20 kva DG set with all as required Set 1 598050 Rs. Five Lakh Ninety Eight Thousand Fifty Only

46 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required. Set 4 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

47 Rate from Bihta Fire hydrant Construction of cemented platform of minimum 2 feet height from finished ground level of suitable size as prescribed by manufactrurer of DG set with polycarbonate sheet roof shelter framed on iron frame structure etc as required to install 10 KVA DG silent Set 1 115885 Rs. One Lakh Fifteen Thousand Eight Hundred Eighty Five Only

Lighting Conductor

48 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required. Set 2 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

49 4.1 Providing and fixing of lightning conductor final made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes tec. Complete as required. Each 6 1056 Rs. One Thousand Fifty Six Only

50 4.5 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For Horizontal run) Metre 130 516 Rs. Five Hundred Sixteen Only

51 4.6 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For vertical run) Metre 45 559 Rs. Five Hundred Fifty Nine Only

Rs. Fourty Seven Lakh Eighty Thousand Three Hundred Ninety Six Only

Numbers of item 50 (Fifty)

Electrification Work - Campus Light

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 1.15.2 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ reeessed PVC conduit as required. 2 x 1.5 sq.mm Metre 245 66

2 2.1.2 Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required. 32 Amp double pole Each 1 1946 Rs. One Thousand Nine Hundred Fourty Six Only

3 3.2 Earthing with GI earth pipe 4.5 meter long and 40 mm dia including accessories, and providing masonary enclosures with cover plate having locking arrangment and watering pipe etc.with charcoal and salt as required . Per Set 1 6323 Rs. Six Thousand Three Hundred Twenty Three Only

4 3.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I.wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and refilling etc. as required. Metre 5 278 Rs. Two Hundred Seventy Eight Only

5 5.14.4 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 90 watt Each 20 5516 Rs. Five Thousand Five Hundred Sixteen Only

6 7.1.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq.mm. Metre 280 315 Rs. Three Hundred Fifteen Only

7 7.7.2 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 6 sq. mm, 4 core Metre 310 206 Rs. Two Hundred Six Only

8 8.23.1 Supply and erection of 7 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, made of 3 mm thick sheet along with base plate of size 260 X 260 X 16 mm, small door opening for junction box mounting including 64 'C' series SP MCB, conneclor, and suitable size foundation bolts with template as required.(but without pole foundation) Single arm, 1000 mm Each 20 27432 Rs. Twenty Seven Thousand Four Hundred Thirty Two Only

9 9.13.1 Providing , laying and fixing of following dia G.l. pipe (medium class) in ground complete with G.l. fittings including trenching (75 cm deep) and re-filling etc as req uired. 50 mm dia Metre 16 849 Rs. Eight Hundred Fourty Nine Only

10 10.3.3 Supplying, installation, testing and commissioning of Astronomical time switch capable of following output in feeder pollars / Lighting DB's for automatic switching ON & OFF of strret lights at sun set & sun rise of twilight (Auto ON, Auto OFF, Auto) with manual override facility with 12124 hour display format with suitable battery and indication for relay status i/c programming at site complete as requiired. 3 output (1 output per phase) and suitable for three phase supply Each 1 11194 Rs. Eleven Thousand One Hundred Ninety Four Only

Rs. Eight Lakh Sixty One Thousand Six Hundred Twenty Seven Only

Numbers of item 10 (Ten)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 EXECUTIVE TABLE Table with ERU and Pedestal with KBPT, CPU Trolley - Structure / Frame of table - Four legs with modesty panel. The type of Storage provided- One side pedestal unit and E.R.U. Footrest-Not Provided.Table top Material- Prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates Thickness of table top material - 25 mm. Gable end material- Prelaminated particles board(wood product) of grade II type III of IS 12823/ Latest. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the modesty panel material- 18 mm. Leg Material- Mild Steel (MS) ERW. The thickness of the Leg material- 1.2 mm. Width of tabletop - 1800 mm. Depth of table - 750 mm. Height of table - 750 mm. Size (L x W) /diameter of leg material - 25 mm . ERU unit consists of - 1 storage unit with shutter. Total Number of drawers /storage in Pedestal units- Each 6 38205.2 Rs. Thirty Eight Thousand Two Hundred Five And Twenty Paise Only

Three drawers. Table top finish- Laminate in color with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/ Latest with having balancing laminate of 0.5mm thick on another side Tabletop shade- Gray. Table / ERU / Pedestal Panel Plain Side Edge to be banded with PVC tape - 2 mm thick with the help of hot melt glue. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate.

2 Conference Table 8 person Conference Table Plt Stage Table (1350 X 600 X 750) 4Nos. Material of work top -25 mm thick prelaminated particle board, Table top plain side-Edge banded with PVC tape of 2 mm thick with help of hot melt glue, Material of Gable end and modesty panel-18 Mm Thick Three Layers Prelaminated Particle Boards Of Grade-II Type-III Of IS:12823/Latest Both Sides Particle Boards Matching With Top Shade In Grade-II Type-III, Length of Each Seat of Work Top ± 20 mm- 675 mm for single AND 1350 mm For dual,Depth of Work Top-600mm, Height of Work Top-750 mm, Corners of work top -850 mm, Table top finish-Laminate In Colour With matt Finish 0.6-0.8 Mm Thickness Of Type S,F Or P Having Index Number 3.2.3 Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 8 70569

3 EXECUTIVE CHAIR High Back Chair- Tilt mechanism - Synchronic tilt mechanism. Backrest type - Tilting type. Pedestal Base - Nylon Minimum density of foam used in seat- 30 kg per cubic meter Minimum thickness of PU foam used in seat - 30 mm Seat upholstery material- Fabric. Backrest base frame material - Hot pressed plywood. Padding at backrest - PU foam The minimum density of foam used in the backrest- 30 kg per cubic meter. Minimum thickness of PU foam used in backrest 30 mm . Backrest upholstery material - Fabric. Upholstery material thickness / fabric substance used in seat /backrest - 0.7 to 1.5 mm ( for fabric). Only Seat Size Is 480mm(L) x 500mm(D) Back Size Is 460mm(L) x 510mm(H) Seat Maximum Height Is 550mm & Minimum Height Is 450mm Back Height From Floor Maximum Is 1050mm & Minimum Is 950mm . (Green Guard by U/L). Dimension variation of ± 5mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 6 16231.6 Rs. Sixteen Thousand Two Hundred Thirty One And Sixty Paise Only

4 OFFICE TABLE Table with KBPT, CPU Tolley - made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size- 1200 X 600 X 750 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. (Green Guard by U/L, Griha Certificate). Dimension variation of ± 5 mm shall be acceptable. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 30 25446.3 Rs. Twenty Five Thousand Four Hundred Fourty Six And Thirty Paise Only

5 STAFF CHAIR (S TYPE) CHAIR- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size - 46.0 cm ( W ) X 27.0 cm ( H ). Seat Size- 46.0 cm ( W ) x 40.0 cm ( H ). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame. Width of the chair- 58 cm, Depth- 56.5 cm, Height- -87.5 cm, Seat Height- 48 cm. Dimension variation of ± 5mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 30 7087.3 Rs. Seven Thousand Eighty Seven And Thirty Paise Only

6 VISITOR CHAIR Chair Type - Non-Revolving and Non-Tilting chair without Armrest. Chair frame type- Cantilever. Armrest type- Without Armrest. Seat type - Padded. Backrest type - Padded Frame, Material Configuration - One piece. Frame material - Steel tube (ERW quality) conforming to IS: 1161 (with latest Amendment). Seat material - Moulded Plywood. Seat material thickness - 20 mm. Polyurethane foam used in seat. Seat upholstered with -N.A . GSM of seat cover - 390 GSM . Backrest material- Moulded Plywood . Backrest upholstered with- Leatherette. Seat Depth 390 mm . Seat Width - 440 mm Seat height from floor surface - 475 mm Backrest width 390 mm . Backrest height from seat - 300 mm . Paint Type- Epoxy. CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 70 4004 Rs. Four Thousand Four Only

7 VISITOR CHAIR VISITOR CHAIR, With Armrest -All Over Size Is : 520mm (L) X 470mm (D) X 930mm (H), The Chair Made Of Full Fabric In Black Colour. Details : Arms : Fixed Armrest, Padded Armrest. Use Of Ply : 12 Mm Thick Hot Pressed Bwr Plywood (Is Grade - 303 For Seat And Back). Seat : 40 ± 2 Mm Thick Polyurethane Foam With Density 32 (±3) Kg Per Cu Meter For Best Quality Cushioning In Seat. Back : 40 ± 2 Mm Thick Polyurethane Foam With Density 32 (±3) Kg Per Cu Meter For Best Quality Cushioning In Back. Backrest Support Foam Design Based On Symmetrical Lumbar Support. Only Seat Size Is 520mm (L) X 470mm (H). Back Height Is @ 930mm. Fixed Cantilever Chair. Base : M.S. Powder Coated Tubular Frame Of Cantilever Type. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 70 6521 Rs. Six Thousand Five Hundred Twenty One Only

8 ALMIRAH Type of Almirah Steel- Almirah steel welded with shelving cabinet. Storwel neo welded construction adds to the sturdiness of the almirah and also ensure durability of the almirah.Nmber of Door - 2. Number of shelves - 04. Powder Coating - with 50 micron thickness minimum. Bod- Body panels are made fom combination of 0.5 and 0.6mm CRAC. Hardware - Main shutter Lock- 3 way 90 degree removable key type cam lock & locking mechanisam. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 30 33458.7 Rs. Thirty Three Thousand Four Hundred Fifty Eight And Seventy Paise Only

9 Steel Rack ' Steel Rack of size 6*36*18.Steel MF System of size 6"x36"x18" with Six Shelves Prime quality CRC sheet conforming to IS 5130/10748/5986. The pitches of the slots at 19.05 mm, Panel/Shelves: 6 Bnd bending process of 905L x 4480 of load capacity 80 Kgs. UDL Max Per shelf. Shelf Material-0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513, Angle Posts Material and size-Rolled steel angle posts of 40 X 40 X 1.8 mm, MS Sheet Thickness of Shelves and Back (Minimum) in mm-0.8, Paint-Powder coated with Lead Free Paint Company CERTIFICATE-ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC BIFMA , Indoor Advantage Gold Certificate. Each 20 10616 Rs. Ten Thousand Six Hundred Sixteen Only

10 RECEPTION TABLE Work Surface -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA ( IS: 513 ), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Each 2 70297.7 Rs. Seventy Thousand Two Hundred Ninety Seven And Seventy Paise Only

Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories - Wire Riser made of 0.8 mm CRCA ( IS-513 ) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA ( IS-513 ) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA ( IS-513 ) is provided for bag hanging. The product should be Greenguard UL certified. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate.,Green Guard by U/L ..

11 RECEPTION CHAIR Mid Back Chair - Size- 590MM (L)X 660MM (D)X 1080MM (H). Seat Upholstry- Fabric.Back Upholstry- Fabric. Seat Height- 538 mm. Warranty- 3 Years. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0 cm pitch-center dia. (76.0 cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 2 11017.6

12 SOFA (3 SEATER) 3 Seater Sofa Frame Structure Material - 19 mm commercial board, Seat Cusion Material-foam, Type of Spring in the Base / Seating- web suspension, Type of Sofa and Backrest- Seat and Backrest are permanently fixed with the frame Structure, Frame Covering- Fully Upholstered, Density of Cushion of Backrest Material (Kg/Cubic M) - 32, Covering Material for Seat and Backrest-Leatherite.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 8 27967.5 Rs. Twenty Seven Thousand Nine Hundred Sixty Seven And Fifty Paise Only

13 CENTRE TABLE COFFEE TABLE - Number of storage under top Double storage (one at upper portion and one at bottom portion) Top material - Other wood. Frame material - Other wood Dimension of Top ( Length X Breadth, or Diameter) 900 mm X 600 mm . Height of centre table- 450 mm .Thickness of top material - 18 mm . Thickness of frame material - 19 mm. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Each 4 12312.3 Rs. Twelve Thousand Three Hundred Twelve And Thirty Paise Only

14 COMPACTOR COMPACTOR 1 BAY - 1 Bay (Static body - 1 + Single faceb movable -1 + Double faced - 3+rail 2400+1600).OPTIMIZER PLUS-PUSHPULL (1200W, 400D,1980H).Optz Plus SS1, Optz Plus SL1, Optz Plus TM1 Solid back panel.CHANNELS (RAILS)- Optz Plus P1/P2 CHNL 1600mm. Optz Plus P1/P2 CHNL 2400mm . The product should be, GREENGUARD UL & Griha certified (Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Each 2 404998 Rs. Four Lakh Four Thousand Nine Hundred Ninety Eight Only

15 REVOLVING CHAIR COFFEE TABLE - Number of storage under top Double storage (one at upper portion and one at bottom portion) Top material - Other wood. Frame material - Other wood Dimension of Top ( Length X Breadth, or Diameter) 900 mm X 600 mm . Height of centre table- 450 mm .Thickness of top material - 18 mm . Thickness of frame material - 19 mm. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 8 11017.6 Rs. Eleven Thousand Seventeen And Sixty Paise Only

16 METAL SINGLE BED METAL BED with mattress - Structure of Metal bed frame including legs and head Structure-MS Hollow Rectangular / Square Section.Size of Rectangular Hollow section - 50 mm X 25 mm. Size of Square Hollow Section - 38 mm X 38 mm Size of Circular Hollow Sections - N.A.Thickness of Hollow Section in Structure-1.2 mm. Support Panel for placement of mattresses- MS hollow box Square Section.Thickness of support Panel -1.0 mm. Over all length of Bed - 2000 mm. Height of Bed in mm - 650 mm. Paint /Finish of MS Parts-Powder Coating. Min Powder/paint coating thickness ( Micron) - 60 micron. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 2 23751.2 Rs. Twenty Three Thousand Seven Hundred Fifty One And Twenty Paise Only

17 DINING TABLE (6 SETER) Cafeteria table of size Upbeat cafeteria table with cube leg & PU Top of size- 1800 x 750 x 750. (Certificate- Green Guard by U/L). Dimension variation of ± 5 mm shall be Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 2 22850.3 Rs. Twenty Two Thousand Eight Hundred Fifty And Thirty Paise Only

18 DINING CHAIR MS Chair - Shape of the Cafeteria Chair Seat - Any Other Shape. Chair Armrest - Without Armrest. Material of Chair Seat - Moulded Plastic , Seat with Cushion - No. Thickness of Cushion for Seat - 0 millimeter,Upholstery Material of Seat- Not Applicable. Material of Chair Back- Moulded Plastic. Back with Cushion- No Thickness of Cushion for Back. 0 millimeter. Density of Back Cushion Kg/m3 - 0. Material of the Chair Under structure - MS Powder Coated. Height of Chair Seat from ground - 459 mm. Overall Height of Chair from ground - 818 mm. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 12 3430.9 Rs. Three Thousand Four Hundred Thirty And Ninety Paise Only

19 WHEEL CHAIR FOLDING WHEEL CHAIR - Total weight of Wheel Chair ( Kg ) - 8. Back rest with Cushion- Yes, With Cushion on Seat . Leg guard type- Swinging and Detachable. Slope of Seat ( Degree ) - 0. Type of Back rest - Foldable. Overall Length (mm) - 790. Foldable - Yes. Types of Wheel Chairs- Attendant Controlled Non Powered. Frame tube thickness (mm) - 1.2. Clearance of frame from floor ( mm ) - 0. Overall Height ( mm )- 870 . Loading Capacity ( Kg ) - 100. Arm rest Type - Fixed. Cushion Material Thickness ( mm ) - 30. Seat Depth ( mm ) - 400. Distance between seat and foot rest ( mm ) - 420. Clearance of footrest from floor ( mm) - 150. Finish of Aluminium casts- Anodized. Hand Rim - With. Handle for push/pull action of Wheel Chair- Yes. Thickness of Seat ( mm ) - 30. Slope of the backrest with respect to floor ( Degree ) - 90. Rear wheel tyre type Solid- Arm rest height from seat ( mm ) - 105. Cushion on Arm rest- With. Types of foot rest - Swinging without Height Adjustment Frame tube Dia ( mm ) - 22. Width of wheel chair- Fixed. Seat Height- Fixed. Seat hight from floor at the front ( mm )- 520. Thickness of back rest (mm) - 10 Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1, BIFMA Level 2, Indoor Advantage Gold Certificate. , CE Certificate, ISO-13485:2016, Each 2 27065.5

20 Dustbin 13 Litre Stainless Steel Grade-304, Capacity-13 Litre pedal operated Each 10 3554.1 Rs. Three Thousand Five Hundred Fifty Four And Ten Paise Only

21 Dustbin 120 Litre HDPE plastic, 100% virgin plastic, reinforced walls, UV protected outdoor bin with 200 mm rubber-tired wheels for mobility, hinged lids securely fitted. Capacity-120 Litre. Each 10 6988.3 Rs. Six Thousand Nine Hundred Eighty Eight And Thirty Paise Only

22 RO Water Purifier 80 Litre RO water purifier inbuilt RO UV purification water coolers, Body Material stainless steel, cold water temperature-15 to 45 Degree C, Cooling capacity - 60 LPH, No of faucets-2, Refrigerant-R134a, Current-4.5 +-10%A, voltage-230 +-10% V AC, Frequency-50 Hz, 1 Phase, RO purification, 7 stages of filtration, fully automatic, faster cooling Low Power Consumption, High output Each 3 51584.5 Rs. Fifty One Thousand Five Hundred Eighty Four And Fifty Paise Only

23 RO Water Purifier 50 Litre RO water purifier inbuilt RO UV purification water coolers, Body Material stainless steel, cold water temperature-15 to 45 Degree C, Cooling capacity - 60 LPH, No of faucets-2, Refrigerant-R134a, Current-4.5 +-10%A, voltage-230 +-10% V AC, Frequency-50 Hz, 1 Phase, RO purification, 7 stages of filtration, fully automatic, faster cooling Low Power Consumption, High output Each 2 44579.7 Rs. Fourty Four Thousand Five Hundred Seventy Nine And Seventy Paise Only

24 AC 1.5 Ton Voltas, Blue Star or Equivalent Ac-1.5 Ton 5 Star split inverter with Wi-fi, Split Air-Conditioners:- Driling holes into a brick wall to take out the pipes (excluding core cutting)-Fixing a hole sleeve & Cap - Fixing & connecting indoor and outdoor units with copper pipes & installation of drainage pipes using the standard kit provided by the manufacturer-installation of separately purchased power plug, MCB & power stabilizer-Temperature & gas pressure testing including Five year maintenance. Each 12 77000 Rs. Seventy Seven Thousand Only

25 TV 32' Fully Smart TV voice assistant, LED full HD Design, slim, glossy black design with thin bezels (VNB), suitable for compact spaces. Each 4 25534.3 Rs. Twenty Five Thousand Five Hundred Thirty Four And Thirty Paise Only

26 Sanitary Napkin Vending Machine (Automatic) Automatic, wall mounted, any size napkin intact, operating free, number of napkin-50, Body mild steel 1 mm thick, antirest powder coated, stock massage-Auto senior, ISI mark, warranty-03 Years Each 1 40274.3 Rs. Fourty Thousand Two Hundred Seventy Four And Thirty Paise Only

27 Sanitary Pad In Cinerator Machine Automatic (Autostart), wall mountable, electronically operated, front load, two chambers, thermal insulation body of MS sheet 1.0 mm powder coated, exhaust pipe, detachable ash tray, ceramic heater overload protector, electronic thermostat based auto cutoff warranty-03 Years Each 1 42642.6 Rs. Fourty Two Thousand Six Hundred Fourty Two And Sixty Paise Only

Grand Total Including GST

Rs. Sixty Eight Lakh Six Hundred Sixty Four Only

Numbers of item 27 (Twenty seven)

Godrej or equivalent brand confirming to the above specification & certification.

G E N E R A L A B S T R A C T

NAME OF WORK : CONSTRUCTION OF S.P. OFFICE BUILDING (G + 3 STRUCTURE) AT BEGUSARAI IN THE DISTRICT OF BEGUSARAI - WITH ELECTRIFICATION Job No. GROUP- 02 OF e-N.I.T. No. 16 /SBD /2026-27

Date of Tender :-

Estimated Cost in Rs. :-

Earnest Money in Rs. :-

Time of Completion :- Months

Cost of BOQ in Rs. :- 10000

Bid processing fee through online mode:- As per eproc 2.

SL. NO NAME OF WORK TOTAL Rs P

S.P. Office Building

2 Sanitary Installation

4 Boring - 2 Nos

5 Compound Wall- 600 Rft

7 Campus Development

8 Approach Road

10 Rain Water Harvesting System

11 Horticulture

Add GST @ 5.36%

12 Fire Fighting

13 Electrification Work

14 Electrification Work - Campus Light

Enclosure-B.O.Q's ORDER

(1) B.O.Q. amounting to Rs.

Rs. Seven Crore Twelve Lakh Fifty Four Thousand Nine Hundred Twenty Four Only

detailed as above for Scheduled items, is herewith approved.

Junior Engineer Asstt. Engineer Executive Engineer Superintending Engineer, BOQ BOQ BOQ Work Circle -1

BILL OF QUANTITY FOR THE CONSTRUCTION OF S.P. OFFICE BUILDING (G + 3 STRUCTURE) AT BEGUSARAI IN THE DISTRICT OF BEGUSARAI,

Building Portion

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 1179.555 123.9

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 0.800 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

3 R.C.D. S/R 22 3.06 Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m (including royality @ Rs. 22.00 per cum but excluding watering, rolling & compaction) Cum 1179.555 103.42 Rs. One Hundred Three And Fourty Two Paise Only

4 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 0.599 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

5 4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Cu.M 0.000 3434 Rs. Three Thousand Four Hundred Thirty Four Only

6 4.12 Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers. Per 50 kg. cement 216 57.16 Rs. Fifty Seven And Sixteen Paise Only

7 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. Sq.m 418.34 211.6

8 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roots, landings, balcnies and access platform. Sq.m 1631.77 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

9 5.9.4 Centring and shuttering including strutting, propping etc. and removal of form for: Shelves (Cost in situ) Sq.m 136.99 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

10 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 1708.32 404.7 Rs. Four Hundred Four And Seventy Paise Only

11 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 1567.59 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

12 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for: Stairs,(excluding landings) except spiral-staircaces. Sq.m 79.37 439.9 Rs. Four Hundred Thirty Nine And Ninety Paise Only

13 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade,Chajjas, corbels etc. including edges Sq.m 135.59 550.9 Rs. Five Hundred Fifty And Ninety Paise Only

14 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 23910.89 94.5 Rs. Ninety Four And Fifty Paise Only

15 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 22601.32 92.6 Rs. Ninety Two And Sixty Paise Only

16 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 10839.33 90.8 Rs. Ninety And Eighty Paise Only

17 5.22.7D Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 16mm dia. KG 23374.65 91.7 Rs. Ninety One And Seventy Paise Only

18 5.22.7E Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 20 mm dia. KG 25524.1 91.7 Rs. Ninety One And Seventy Paise Only

19 5.22.7F Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 25 mm dia. KG 55723.26 91.7 Rs. Ninety One And Seventy Paise Only

20 5.22.7H Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 32 mm dia. KG 587 91.7 Rs. Ninety One And Seventy Paise Only

21 5.33A.1+ 5.33.B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:Add or deduct for providing richer or leaner mixes respectively at all floor levels: Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 322.8 4921.4 Rs. Four Thousand Nine Hundred Twenty One And Fourty Paise Only

22 5.33A.2.1+ 5.33B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts: Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 192.23 5458 Rs. Five Thousand Four Hundred Fifty Eight Only

23 5.33A.2.2 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. Cu.m 14.95 5677.2 Rs. Five Thousand Six Hundred Seventy Seven And Twenty Paise Only

24 5.33A.2.2+ 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.:Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 370.8 5841.7 Rs. Five Thousand Eight Hundred Fourty One And Seventy Paise Only

25 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 41.69 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

26 6.1.14C+ 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) : Extra tor Brick work in superstructure above plinth level upto floor V cum Cu.M 443.46 5765.2 Rs. Five Thousand Seven Hundred Sixty Five And Twenty Paise Only

27 6.45.1 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. Cement mortar 1 : 3 (1 cement : 3 coarse sand) sqm 181.99 723 Rs. Seven Hundred Twenty Three Only

28 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base, the drain duly. plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. but excluding carriage cost of bricks, sand and jhama metal. Per M 64.92 1087.9 Rs. One Thousand Eighty Seven And Ninety Paise Only

29 8.2.1.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Rajnagar plain white marble /Udaipur green marble/Zebra block marble:Area of slab up to 0.50 sqm. Sq.M 411.73 2458 Rs. Two Thousand Four Hundred Fifty Eight Only

30 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 0.399 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

31 9.96.1 Providing and fixing alluminium sliding door bolt anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to rquired colour and shade with nuts and screws etc. complete : 300 x 16mm Each 47 235.5 Rs. Two Hundred Thirty Five And Fifty Paise Only

32 9.97.1 Providing and fixing alluminium sliding tower bolt anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with nuts and screws etc. complete : 300 x 10mm Each 94 111.4 Rs. One Hundred Eleven And Fourty Paise Only

33 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete: 125mm Each 188 57.1 Rs. Fifty Seven And Ten Paise Only

34 9.101.2 Providing and fixing alluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete : Twin rubber stopper Each 47 60.8 Rs. Sixty And Eighty Paise Only

35 9.147B.1 Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. Sq.M 18.59 6690.7 Rs. Six Thousand Six Hundred Ninety And Seventy Paise Only

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

36 9.147D.2 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. Sq.M 0.199 9471 Rs. Nine Thousand Four Hundred Seventy One Only

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

37 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. Sq.M 5.44 6303.4 Rs. Six Thousand Three Hundred Three And Fourty Paise Only

38 10.17 Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete. Each 60 174.6 Rs. One Hundred Seventy Four And Sixty Paise Only

39 10.32.2 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc as required: In gratings, frames, guard bar, ladders, railing, brackets, gets & similar works. KG 147 114.6 Rs. One Hundred Fourteen And Sixty Paise Only

40 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). Kg 1767.18 546.8 Rs. Five Hundred Fourty Six And Eighty Paise Only

41 11.3.1 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm nominal size stone aggregate Sq.M 0.000 289.1 Rs. Two Hundred Eighty Nine And Ten Paise Only

42 11.20.1 Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand) : Light shade using white cement. Sq.M 269.485 1053.6 Rs. One Thousand Fifty Three And Sixty Paise Only

43 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Sq.M 362.13 795

44 11.37 Providing and laying Ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. Sq.M 0.200 686.8 Rs. Six Hundred Eighty Six And Eighty Paise Only

45 11.41.2 Providing and laying vitrifed floor tiles in different sizes { thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete: Size of Tile 60 x 60 cm. Sq.M 1654.83 1638.8 Rs. One Thousand Six Hundred Thirty Eight And Eighty Paise Only

46 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete : Size of Tile 600 x 600 mm. Sq.M 133.65 1191.8 Rs. One Thousand One Hundred Ninety One And Eighty Paise Only

47 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 1498.4 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

48 11.73 + 13.57.1 Providing designation 100A one brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.including flush pointing on brick flooring with cement mortar 1:3( 1cement: 3 coarse sand). Sq.M 0.999 537.5 Rs. Five Hundred Thirty Seven And Fifty Paise Only

49 12.58X.1 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, Sq.M 331.7 1608.2 Rs. One Thousand Six Hundred Eight And Twenty Paise Only

required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.

50 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 117.6 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

51 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 10 132 Rs. One Hundred Thirty Two Only

52 12.79.6.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Shoe Each 10 115.95 Rs. One Hundred Fifteen And Ninety Five Paise Only

53 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 118 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

54 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 6174.9 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

55 13.13.1+ 13.36.5 Cement plaster in coarse sand : 20mm cement plaster of mix : 1:3(1cement : 3 coarse sand) :Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 20mm cement plaster 1:3 (1 cement : 3 sand) Sq.M 0.000 240.4 Rs. Two Hundred Fourty And Fourty Paise Only

56 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 0.999 203.6 Rs. Two Hundred Three And Sixty Paise Only

57 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 1740.31 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

58 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.M 1611.78 137 Rs. One Hundred Thirty Seven Only

59 13.77.2 Distempering with oil bound washable distemper of approved brand and manufacture to give and even shade: New work (two or more coats) over and including priming coat with cement primer Sq.M 6303.43 102.3 Rs. One Hundred Two And Thirty Paise Only

60 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.M 7915.21 105.4 Rs. One Hundred Five And Fourty Paise Only

61 13.82.1+ 13.81.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) :Applying primer coat : With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works Sq.M 351.04 118.1 Rs. One Hundred Eighteen And Ten Paise Only

62 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.M 246.93 84.5

63 26.1 Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, minimum 1800mm length and minimum 100 mm wide , in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polythylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bomboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge. sqm 340.05 5263 Rs. Five Thousand Two Hundred Sixty Three Only

64 26.6E.1 Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in- Charge. 9mm thickness sqm 493.91 4368.2 Rs. Four Thousand Three Hundred Sixty Eight And Twenty Paise Only

65 26.86.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs /SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 85 mm Meter 349.75 768.1 Rs. Seven Hundred Sixty Eight And Ten Paise Only

66 26.88.2 Providing and fixing factory made single extruded WPC {Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm', modulus of elasticity 850 N/mm' and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk 5.5 screws, all as per direction of Engineer-In- Charge. {Note: stainless steel butt hinges and necessary 5.5 screws shall be paid separately) 35 mm thick sqm 0.000 4803.1 Rs. Four Thousand Eight Hundred Three And Ten Paise Only

67 Br Sl.No. 7239 Supplying Epoxy paint Liter 215.49 249.72 Rs. Two Hundred Fourty Nine And Seventy Two Paise Only

68 Extra cost of brick 100A (a) Munger Per %o 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

69 Extra cost of slag cement Munger Per bag 14570 0.81 Rs. And Eighty One Paise Only

70 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.400 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

71 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 0.600 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

72 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 0.799 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

73 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.400 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Four Crore Sixty Lakh Twenty Five Thousand Two Hundred Fifty Only

Numbers of item 72 (Seventy two)

Note :- (1) All types of brick-work, concrete work, plaster work, flooring and other cement related items of work include cost of curing and execution of works will be as per guidance of National Building code and direction of E/I. (2) NOTHING EXTRA repeat NOTHING EXTRA shall be paid on account of carriage and no claim whatsoever shall be entertained in this respect. If actual lead is less than above mentioned lead payment will be made as per actual lead.

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 50.77 360.7

2 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 3.74 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

3 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level : 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)( Foundation, Band at P.L.& S.Tank Cover) Cu.M 0.000 4232.4 Rs. Four Thousand Two Hundred Thirty Two And Fourty Paise Only

4 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 122 94.5 Rs. Ninety Four And Fifty Paise Only

5 6.1.12C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4(1 cement : 4 coarse sand) Cu.M 13.23 5116.3 Rs. Five Thousand One Hundred Sixteen And Thirty Paise Only

6 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 3.24 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

7 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 17.28 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

8 12.78.1 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 75mm diameter M 90 162.7 Rs. One Hundred Sixty Two And Seventy Paise Only

9 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 95 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

10 12.79.3.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee with door Each 10 193.4 Rs. One Hundred Ninety Three And Fourty Paise Only

11 12.79.4.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee without door (T. Bend) Each 10 190.7 Rs. One Hundred Ninety And Seventy Paise Only

12 12.79.5.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm dia Plain bend Each 10 91.8 Rs. Ninety One And Eighty Paise Only

13 12.79.5.2+ 12.81 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 mm Floor trap Each 10 179.9 Rs. One Hundred Seventy Nine And Ninety Paise Only

14 12.80.1 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 75mm dia clip Each 70 184.1 Rs. One Hundred Eighty Four And Ten Paise Only

15 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 75 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

16 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 0.000 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

17 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 42.94 203.6 Rs. Two Hundred Three And Sixty Paise Only

18 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 15.45 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

19 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 8 4470.9 Rs. Four Thousand Four Hundred Seventy And Ninety Paise Only

20 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 12 4230 Rs. Four Thousand Two Hundred Thirty Only

21 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 16 3723.2 Rs. Three Thousand Seven Hundred Twenty Three And Twenty Paise Only

22 17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 22 2764.4 Rs. Two Thousand Seven Hundred Sixty Four And Fourty Paise Only

23 18.76.1 Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks Each 55 198.5 Rs. One Hundred Ninety Eight And Fifty Paise Only

24 19.15.1 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar Each 12 310.9 Rs. Three Hundred Ten And Ninety Paise Only

25 19.19.1.1 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality:LD 2.5:Rectangular shape 600x450 mm internal dimensions Each 2 1120.6 Rs. One Thousand One Hundred Twenty And Sixty Paise Only

26 19.30.1.1 Constructing brick masonry chamber for underground C.I.Inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg),R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 16 4266.8 Rs. Four Thousand Two Hundred Sixty Six And Eighty Paise Only

27 Br. Providing brick bats and filling the same in soak pit as per specificarion and direction of engineer in charge. Cu.M 11.68 1198.67 Rs. One Thousand One Hundred Ninety Eight And Sixty Seven Paise Only

28 Extra cost of brick 100A (a) Munger Per %o 0.999 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

29 Extra cost of slag cement Munger Per bag 66 0.81 Rs. And Eighty One Paise Only

30 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 12.2 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

31 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 6.84 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

32 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 4.88 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

Rs. Five Lakh Sixty Thousand Two Hundred Seventy Nine Only

Numbers of item 32 (Thrity two )

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 22 1068.5

2 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 22 713.3 Rs. Seven Hundred Tthirteen And Thirty Paise Only

3 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 22 146.3 Rs. One Hundred Fourty Six And Thirty Paise Only

4 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms. Each 22 204.7 Rs. Two Hundred Four And Seventy Paise Only

5 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms Each 22 424 Rs. Four Hundred Twenty Four Only

6 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 15 mm nominal outer dia Pipes M 95.4 278.2 Rs. Two Hundred Seventy Eight And Twenty Paise Only

7 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 20 mm nominal outer dia Pipes M 61 350.8 Rs. Three Hundred Fifty And Eighty Paise Only

8 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:25 mm nominal outer dia Pipes M 56.4 294.7 Rs. Two Hundred Ninety Four And Seventy Paise Only

9 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:32 mm nominal outer dia Pipes M 45.4 359.1 Rs. Three Hundred Fifty Nine And Ten Paise Only

10 18.9.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:40 mm nominal outer dia Pipes M 25 477.6 Rs. Four Hundred Seventy Seven And Sixty Paise Only

11 18.10.4 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc:Internal work - Exposed on wall:32 mm dia nominal bore M 20 457.8 Rs. Four Hundred Fifty Seven And Eighty Paise Only

12 18.15.1 Providing and fixing brass bib cock of approved quality :15 mm nominal bore Each 42 303.8 Rs. Three Hundred Three And Eighty Paise Only

13 18.16.1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore Each 42 303.8 Rs. Three Hundred Three And Eighty Paise Only

14 18.16.2 Providing and fixing brass stop cock of approved quality :20 mm nominal bore Each 42 328 Rs. Three Hundred Twenty Eight Only

15 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore Each 12 532.3 Rs. Five Hundred Thirty Two And Thirty Paise Only

16 18.19.2.2 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore:Vertical Each 12 777.9 Rs. Seven Hundred Seventy Seven And Ninety Paise Only

17 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter Each 6 190.1 Rs. One Hundred Ninety And Ten Paise Only

18 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per Litre 6000 9.7 Rs. Nine And Seventy Paise Only

Rs. Two Lakh Seventy Two Thousand Five Hundred Sixty Seven Only

Numbers of item 18 (Eighteen)

Deep Tubewell - 2 Nos

ESTIMATED AMOUNT : Rs.

SlNO SRIN DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS AMOUNT

1 18.12.4 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc:External work:32 mm dia nominal bore M 24.4 381.7

2 24.2.1.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of allequipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level:All type of soil:300 mm dia M 106.68 567.9 Rs. Five Hundred Sixty Seven And Ninety Paise Only

3 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia M 86.68 660.1 Rs. Six Hundred Sixty And Ten Paise Only

4 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge:150 mm nominal size dia M 20 673.5 Rs. Six Hundred Seventy Three And Fifty Paise Only

5 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-incharge. Cum 5.652 1343.2 Rs. One Thousand Three Hundred Fourty Three And Twenty Paise Only

6 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hour 12 916.8 Rs. Nine Hundred Sixteen And Eighty Paise Only

7 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:150 mm dia Each 1 210.7 Rs. Two Hundred Ten And Seventy Paise Only

8 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:150 mm clamp Each 1 1531.4 Rs. One Thousand Five Hundred Thirty One And Fourty Paise Only

9 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I): 150 mm dia Each 1 281.8 Rs. Two Hundred Eighty One And Eighty Paise Only

10 Supplying, fitting & fixing submersible motor pump (1 H.P.) of Crompton or any other approved I.S.I. make complete with cable wire, fited & fixed complete as per specification and direction of Engineer I/C with all accesories etc. all complete job. Per Set 1 13500 Rs. Tthirteen Thousand Five Hundred Only

11 Supplying 1 HP fully automatic Crompton single phase 220 volts starter on a common board with 16 amps Havels make DP main switch 1 No. suitable voltameter (ISI make ) 1 No. ampere meter (ISI make) 1 no, complete with panel all taxes etc. complete job. Per Set 1 2450 Rs. Two Thousand Four Hundred Fifty Only

Rs. Three Lakh Fifty Four Thousand Three Hundred Four Only

Numbers of item 11 (Eleven)

Compound Wall- 600 Rft

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 31.72 360.7

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 3.17 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

3 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 42.03 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

4 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 24.85 404.7 Rs. Four Hundred Four And Seventy Paise Only

5 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 45.58 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

6 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 467.73 94.5 Rs. Ninety Four And Fifty Paise Only

7 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 623.65 92.6 Rs. Ninety Two And Sixty Paise Only

8 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 467.73 90.8 Rs. Ninety And Eighty Paise Only

9 5.33A.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level Cu.m 7.8 4756.9 Rs. Four Thousand Seven Hundred Fifty Six And Ninety Paise Only

10 5.33A.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts Cu.m 4.13 5293.5 Rs. Five Thousand Two Hundred Ninety Three And Fifty Paise Only

11 5.33A.2.2 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. Cu.m 2.8 5677.2 Rs. Five Thousand Six Hundred Seventy Seven And Twenty Paise Only

12 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 0.999 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

13 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 520 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

14 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 27.45 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

15 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 205.95 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

16 13.46.A1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coat applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior. Sq.M 205.95 132.5 Rs. One Hundred Thirty Two And Fifty Paise Only

17 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.M 43.49 84.5 Rs. Eighty Four And Fifty Paise Only

18 Extra cost of brick 100A (a) Munger Per %o 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

19 Extra cost of slag cement Munger Per bag 153 0.81 Rs. And Eighty One Paise Only

20 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.999 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

21 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 0.000 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

22 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 0.999 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

23 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.000 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Total of 100 Rft

Total of 600 Rft

Rs. Thirty Three Lakh Twenty Six Thousand Eight Hundred Fourty Only

Numbers of item 23 (Twenty three)

Main Gate - 2 No

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 8.83 360.7

2 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 8.83 123.9 Rs. One Hundred Twenty Three And Ninety Paise Only

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 0.68 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

4 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 12.9 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

5 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth, bams, griders, bressumers and contilevers. Sq.m 0.000 404.7 Rs. Four Hundred Four And Seventy Paise Only

6 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 11.78 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

7 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 0.999 94.5 Rs. Ninety Four And Fifty Paise Only

8 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 213.24 90.8 Rs. Ninety And Eighty Paise Only

9 5.22.7D Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 16mm dia. KG 94.42 91.7 Rs. Ninety One And Seventy Paise Only

10 5.33A.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level Cu.m 0.000 4756.9 Rs. Four Thousand Seven Hundred Fifty Six And Ninety Paise Only

11 5.33A.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts Cu.m 1.57 5293.5 Rs. Five Thousand Two Hundred Ninety Three And Fifty Paise Only

12 10.32.2 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc as required: In gratings, frames, guard bar, ladders, railing, brackets, gets & similar works. KG 1398 114.6 Rs. One Hundred Fourteen And Sixty Paise Only

13 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 0.000 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

14 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 11.78 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

15 13.46.A1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coat applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior. Sq.M 11.78 132.5 Rs. One Hundred Thirty Two And Fifty Paise Only

16 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sq.M 18.12 84.5 Rs. Eighty Four And Fifty Paise Only

17 Extra cost of brick 100A (a) Munger Per %o 0.15 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

18 Extra cost of slag cement Munger Per bag 27 0.81 Rs. And Eighty One Paise Only

19 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.15 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

20 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 1.51 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

21 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 2.75 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

22 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.75 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Four Lakh Seventy Two Thousand Six Hundred Twenty Two Only

Numbers of item 22 (Twenty two)

Campus Development

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.25(a) Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead. cum 438.4 411.7 Rs. Four Hundred Eleven And Seventy Paise Only

2 11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Sq.M 1299.26 721.1 Rs. Seven Hundred Twenty One And Ten Paise Only

Rs. Eleven Lakh Seventeen Thousand Three Hundred Eighty Six Only

Numbers of item 2 (Two)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 108 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

2 4.1.2 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) Cu.M 120 4420.8 Rs. Four Thousand Four Hundred Twenty And Eighty Paise Only

3 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 96 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

4 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 600 283.3

5 Extra cost of brick 100A (a) Munger Per %o 23.23 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

6 Extra cost of slag cement Munger Per bag 1081 0.81 Rs. And Eighty One Paise Only

7 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 23.23 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

8 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 61.2 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

9 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 122.4 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

10 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 119.02 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Ten Lakh Seventy Five Thousand Nine Hundred Fifty Nine Only

Numbers of item 10 (Ten)

Rain Water Harvesting System

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 3.7 360.7

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 1.63 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

3 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 0.000 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

4 6.1.12C + 6.3C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4(1 cement : 4 coarse sand): Extra for Brick work in superstructure above plinth level upto floor V Cu.M 2.63 5958.5 Rs. Five Thousand Nine Hundred Fifty Eight And Fifty Paise Only

5 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding KG 104.58 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

6 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 3.62 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

7 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 30 257.5

8 12.79.3.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee with door Each 3 193.4 Rs. One Hundred Ninety Three And Fourty Paise Only

9 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 6 132 Rs. One Hundred Thirty Two Only

10 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 14 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

11 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 13.41 203.6 Rs. Two Hundred Three And Sixty Paise Only

12 13.82.1+ 13.81.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) :Applying primer coat : With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works Sq.M 3.24 118.1 Rs. One Hundred Eighteen And Ten Paise Only

13 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge,upto 90 metre depth below ground level:All types of soil:300 mm dia M 10 486.8 Rs. Four Hundred Eighty Six And Eighty Paise Only

14 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia M 5 660.1

15 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge:150 mm nominal size dia M 10 673.5 Rs. Six Hundred Seventy Three And Fifty Paise Only

16 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 0.31 1188.9 Rs. One Thousand One Hundred Eighty Eight And Ninety Paise Only

17 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 0.98 1195.6 Rs. One Thousand One Hundred Ninety Five And Sixty Paise Only

18 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:150 mm dia Each 1 210.7 Rs. Two Hundred Ten And Seventy Paise Only

19 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:150 mm clamp Each 1 1531.4 Rs. One Thousand Five Hundred Thirty One And Fourty Paise Only

20 Extra cost of brick 100A (a) Munger Per %o 0.000 320.57

21 Extra cost of slag cement Munger Per bag 27 0.81 Rs. And Eighty One Paise Only

22 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.999 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

23 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 0.000 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

24 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 0.000 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

25 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.000 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Seventy One Thousand Seven Hundred Fourty Four Only

Numbers of item 25 (Twenty Five)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 1.12 f.s.o.r Plantation work ( 10 gram DAP and pesticide per plant). Transportation of plant and planting work from temporary plant salad. Plantation 20 man days, Transportation of Plant - 6 man days, DAP - 260/- persicide - 100 Rs, etc - 50/- Each 18 0.1

2 3.5.1 F.S.O.R Provision for plant transportion by tractor. Per %o 0.18 1000 Rs. One Thousand Only

3 6.3 f.s.o.r Providing bomboo barricating. Each 18 100 Rs. One Hundred Only

4 6.4.1 f.s.o.r Purchase of earth and round 152.5 [email protected]/cft per % no plants. Each 0.18 1586 Rs. One Thousand Five Hundred Eighty Six Only

5 9.2 f.s.o.r Labour for planting. Each 18 15.7 Rs. Fifteen And Seventy Paise Only

6 9.2.3 f.s.o.r (A) Suppling and providing plants all as following details (10 plant's) Each 12 250 Rs. Two Hundred Fifty Only

7 9.2.3 f.s.o.r (B) Suppling and providing plants all as following details (10 plant's) Each 6 2000 Rs. Two Thousand Only

Rs. Seventeen Thousand Five Hundred Fifty Only

Numbers of item 07 (Seven)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

I PIPING & VALVES

1 7.1 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm dia M 125 359

2 7.4 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50 mm dia M 40 646 Rs. Six Hundred Fourty Six Only

3 7.6 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia M 18 951 Rs. Nine Hundred Fifty One Only

4 7.8 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150 mm dia M 54 1856 Rs. One Thousand Eight Hundred Fifty Six Only

5 11.4 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia Set 6 4588 Rs. Four Thousand Five Hundred Eighty Eight Only

6 11.5 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia Set 12 6056 Rs. Six Thousand Fifty Six Only

7 11.6 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150 mm dia Set 2 8241 Rs. Eight Thousand Two Hundred Fourty One Only

8 14.4 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 80 mm dia Set 2 7287 Rs. Seven Thousand Two Hundred Eighty Seven Only

9 14.5 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100 mm dia Set 4 10478 Rs. Ten Thousand Four Hundred Seventy Eight Only

10 14.7 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150 mm dia Set 2 17300 Rs. Seventeen Thousand Three Hundred Only

II INTERNAL HYDRAN SYSTEM

11 9.2 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel Set 6 5722 Rs. Five Thousand Seven Hundred Twenty Two Only

13 16.2 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless steel (Grade 304) Set 12 4445

14 17.1 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. "Connections from riser with 25 mm dia stop gun metalvalve & M.S. Pipe and socket." 30 m Set 6 7920 Rs. Seven Thousand Nine Hundred Twenty Only

15 NS - 1 Providing and fixing fire hose cabinet fabricated from 16 guage M.S. sheet with double glazed front door and pad locking arrangement, painted fire red with stove enameled fapnt and fire house written on front including necessary supports (to house TWO length of canvas hose with couplings, branch pipe and nozzle) Each 6 7600 Rs. Seven Thousand Six Hundred Only

16 18.2 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Stainless steel (Grade 304) Nos 6 1631 Rs. One Thousand Six Hundred Thirty One Only

17 NS - 2 Providing and fixing 25 mm dia brass ball valve full bore type with lever and screwed female ends. For 20 kg/Sq.cm) Each 6 1722 Rs. One Thousand Seven Hundred Twenty Two Only

18 NS - 3 Providing and fixing 25 mm dia gun metal single acting air release valve with screwed inlet tested. For 20 kg/Sq.cm) Each 2 1722 Rs. One Thousand Seven Hundred Twenty Two Only

19 NS - 4 Providing and fixing dial type pressure guage with isolation cock and chrome coated copper pipe on main headed Dial dia 150 mm calibration 0-15 kg /Sq.cm) Each 4 1722 Rs. One Thousand Seven Hundred Twenty Two Only

20 19.3 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 3 way - 150 mm dia M.S. Pipe Set 1 9071 Rs. Nine Thousand Seventy One Only

III FIRE PUMPS & ACCESSORIES

21 1.9 (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. 1620 lpm at 56 m Head Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm 2 pressure at the highest/farthest point. Set 1 281411

22 3.3 a) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. d) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. e) Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 56 m Head Set 1 80063 Rs. Eighty Thousand Sixty Three Only

23 4.2 Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 (b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head Set 1 84198 Rs. Eighty Four Thousand One Hundred Ninety Eight Only

24 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. Set 1 17707 Rs. Seventeen Thousand Seven Hundred Seven Only

25 NS - 5 Providing and fixing liquid level controller for fire pump to stop fire pumps in case of low level of water in tank, cost of conduit, cable and panel including making connection to pump panel and commissioning complete. a. Floor type senser with panel Each 2 10150 Rs. Ten Thousand One Hundred Fifty Only

26 NS - 5 Providing and fixing liquid level controller for fire pump to stop fire pumps in case of low level of water in tank, cost of conduit, cable and panel including making connection to pump panel and commissioning complete. b. Installation Each 2 1015 Rs. One Thousand Fifteen Only

27 22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. Each 4 1442 Rs. One Thousand Four Hundred Fourty Two Only

IV Panel for Fire Pumps

28 5.1 Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0- 500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A Set 1 248187 Rs. Two Lakh Fourty Eight Thousand One Hundred Eighty Seven Only

OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Jockey Pump 63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.

29 NS - 6 Providing and fixing heavy duty aluminium armored cables 1.1 KVA grade including necessary support clamps at ceiling : Power cable 3 core 16 Sq. mm Meter 74 456 Rs. Four Hundred Fifty Six Only

30 NS - 6 Providing and fixing heavy duty aluminium armored cables 1.1 KVA grade including necessary support clamps at ceiling : Power cable 3.5 core 35 Sq. mm Meter 25 550 Rs. Five Hundred Fifty Only

V FIRE EXTINGUISHERS

31 NS - 7 Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS: 15683 including fixing with dash fasteners etc. complete. Capacity 4.5 kg. Each 3 8500 Rs. Eight Thousand Five Hundred Only

32 NS - 8 welded M.S. cylindrical body, squeeze lever discharge valve, 30 cms long high pressure discharge hose ISI marked as per IS:15683 including fixing to wall with brackets etc. complete. Capacity 6 Kg. Each 6 5400 Rs. Five Thousand Four Hundred Only

VI AUTOMATIC FIRE ALARM SYSTEM AS PER DSR'2025 & Market Rate ( M. R. )

33 NS - 9 Supply, installation, testing and commissioning of conventional fire alarm control panel with visula indication for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS : 2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required with inbuilt battery charger and batteries for emergency back up. 2 Zones capacity. Each 1 18500 Rs. Eighteen Thousand Five Hundred Only

VII AUTOMATIC SPRINKLER SYSTEM

34 21.1 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler : Each 60 408 Rs. Four Hundred Eight Only

35 29 Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required. Each 60 167 Rs. One Hundred Sixty Seven Only

36 R.C.D. S/R 22 3.06 Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m (including royality @ Rs. 22.00 per cum but excluding watering, rolling & compaction) Cum 123.06 103.42 Rs. One Hundred Three And Fourty Two Paise Only

37 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 123.24 123.9 Rs. One Hundred Twenty Three And Ninety Paise Only

38 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 0.000 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

39 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: foudations, footings, bases of columns etc. for mass concrete. Sq.m 13.545 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

40 5.9.2 Centring and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc. Sq.m 159.25 375.1 Rs. Three Hundred Seventy Five And Ten Paise Only

41 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roots, landings, balconies and access platform. Sq.m 0.000 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

42 5.9.14 Centring and shuttering including strutting, propping etc. and removal of form for: Extra for shuttering in circular work (20% of respective centring and shuttering items) Sq.m 0.200 20.2 Rs. Twenty And Twenty Paise Only

43 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 1564 92.6 Rs. Ninety Two And Sixty Paise Only

44 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 0.000 90.8 Rs. Ninety And Eighty Paise Only

45 5.33A.1+ 5.33.B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:Add or deduct for providing richer or leaner mixes respectively at all floor levels: Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 25 4921.4 Rs. Four Thousand Nine Hundred Twenty One And Fourty Paise Only

46 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 0.999 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

47 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 163.46 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

48 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions.(ii) 11 nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand) mixed with water proofing compound in recommended proportion, (iii) Illrd course of applying blown or/ residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) Ivth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). Sq.m 163.46 480.6 Rs. Four Hundred Eighty And Sixty Paise Only

49 Br Sl.No. 7239 Supplying Epoxy paint Liter 0.400 249.72 Rs. Two Hundred Fourty Nine And Seventy Two Paise Only

50 Supplying of 7.5 HP Submersibble pump Each 2 125000 Rs. One Lakh Twenty Five Thousand Only

51 Extra cost of brick 100A (a) Munger Per %o 0.000 320.57 Rs. Three Hundred Twenty And Fifty Seven Paise Only

52 Extra cost of slag cement Munger Per bag 301 0.81 Rs. And Eighty One Paise Only

53 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.000 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

54 Do--do-- (b) Coarse sand ( Lead 54 Km pucca from Lakhisarai river work site) Cu.M 0.999 Rs. One Thousand One Hundred Sixty Two And Seventy Eight Paise Only

55 Do-do- (b) Stone chips ( Lead 176 Km by Rail & 2 Km by Road to work site ) Cu.M 30 1545.88 Rs. One Thousand Five Hundred Fourty Five And Eighty Eight Paise Only

56 Do-do- (c) Local Sand Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 0.000 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Add GST @ 5.36%

AUTOMATIC FIRE ALARM SYSTEM Total

57 28.1.3 DSR-2025 Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. Each 6 513 Rs. Five Hundred Tthirteen Only

58 28.1.7 DSR-2025 Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. Each 6 530 Rs. Five Hundred Thirty Only

59 28.5.2 DSR-2025 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. Each 350 192 Rs. One Hundred Ninety Two Only

Rs. Twenty Six Lakh Sixty One Thousand One Hundred Fifty One Only

Electrification Work - Police Station

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 1.3.3 Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. Box etc. as required. (a) Group C Per Point 456 1146

2 1.5 Wiring for light/Power plug with 2x4 Sq.mm FR PVC insulated Copper conductor single core cable in surface recessed PVC conduit along with 1 No. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. Per Mtr. 1857 309 Rs. Three Hundred Nine Only

3 1.7.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (2 x2.5mm2 + 1x2.5 mm2 earth wire) Per Mtr. 2422 246 Rs. Two Hundred Fourty Six Only

4 1.7.11 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x6.0 mm2 + 1x6.0mm2) Per Mtr. 197 660 Rs. Six Hundred Sixty Only

5 1.7.12 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x10 mm2 + 1x6 mm2) Per Mtr. 120 925 Rs. Nine Hundred Twenty Five Only

6 1.7.14 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x25 mm2 + 1x6 mm2) Per Mtr. 80 2235 Rs. Two Thousand Two Hundred Thirty Five Only

7 3 *1.24.4+ 3*1.24.1+ 1*1.24.5+ 1*1.24.3+ 1*2.12.1 Supplying and fixing following modula'r switch/ socket on the existing modular plate & switch box including connections but excluding modular plate.etc. as required. 3 pin , 5/6 amps socket outlet, 5/6 amps switch, 6 pin, 15/16 amps socket outlet, 15/16 amps switch Supptying and fixing following rating, 24Al4L5 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required' 6 A to 32'A, Single pole Each 50 1141 Rs. One Thousand One Hundred Fourty One Only

8 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as req u ired. Each 129 358 Rs. Three Hundred Fifty Eight Only

9 1.31 Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection etc. as required. Each 81 414 Rs. Four Hundred Fourteen Only

10 1.32 Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as required. Each 49 531 Rs. Five Hundred Thirty One Only

11 1.33 Supplying and fixing 2 Pin, 5/6 amps ceilling rose on the existing Junction box / wooden block including connection etc. as required. Each 97 64 Rs. Sixty Four Only

12 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 121 80 Rs. Eighty Only

13 1.53 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Each 16 683 Rs. Six Hundred Eighty Three Only

14 2.4.10 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required' 125 A,16 KA, TPMCCB Each 4 5037 Rs. Five Thousand Thirty Seven Only

15 2.4.12 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required' 200 A,16 KA, TPMCCB Each 4 8101 Rs. Eight Thousand One Hundred One Only

16 2.4.16 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required' 315 A, 35 KA, TPMCCB Each 1 22994 Rs. Twenty Two Thousand Nine Hundred Ninety Four Only

17 2.5.3 Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 200 Amps. Each 4 10550 Rs. Ten Thousand Five Hundred Fifty Only

18 2.5.4 Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 315/300 A Each 1 12883 Rs. Twelve Thousand Eight Hundred Eighty Three Only

19 2.7.4 Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 125 A Each 1 12543 Rs. Twelve Thousand Five Hundred Fourty Three Only

20 2.7.8 Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 320 A Each 1 30787 Rs. Thirty Thousand Seven Hundred Eighty Seven Only

21 2.9.1 Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator) 4 way ( 4 + 12 ), Double door, horizontal type Each 17 4184 Rs. Four Thousand One Hundred Eighty Four Only

22 2.12.1 Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6 A to 32'A, Single pole Each 204 237 Rs. Two Hundred Thirty Seven Only

23 2.12.7 Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 40 A to 63 A,.TP Each 6 1859 Rs. One Thousand Eight Hundred Fifty Nine Only

24 2.12.8 Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 40 A to 63 A, TP&N Each 11 2329 Rs. Two Thousand Three Hundred Twenty Nine Only

25 2.18.2 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps Each 16 3348 Rs. Three Thousand Three Hundred Fourty Eight Only

26 2.18.3 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 53 Amps Each 16 3010 Rs. Three Thousand Ten Only

27 2.20. Providing and fixing M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required. Each 5 214 Rs. Two Hundred Fourteen Only

28 2.25 Supplying and fixing 20 amps, 415 volts, TPN industrial type, socket outlet with 4 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Each 12 3008 Rs. Three Thousand Eight Only

29 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. Metre 30 144 Rs. One Hundred Fourty Four Only

30 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required. Set 2 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

31 5.1 Supplying and fixing 4'X18 wat[ LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. Each 72 521 Rs. Five Hundred Twenty One Only

32 5.8.3 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 Im/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 18 watt Each 94 1694 Rs. One Thousand Six Hundred Ninety Four Only

33 5.9 Supplying and fixing recess mounted 36 watt LED flat panel (2' X 2') with minimum efficacy 100 lm/w which privides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. Each 23 2663 Rs. Two Thousand Six Hundred Sixty Three Only

34 5.14.4 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 90 watt Each 9 5516 Rs. Five Thousand Five Hundred Sixteen Only

35 5.15.7 Supplying and fixing fotrlowing types LED Flood light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on poleibuilding including connection earthing the body etc as required 200 watt Each 4 10495 Rs. Ten Thousand Four Hundred Ninety Five Only

36 6.1.4 Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required. 9/10 watt LED lamp Each 121 161 Rs. One Hundred Sixty One Only

37 7.2.3 Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq. mm and upto 185 sq. mm Metre 90 243 Rs. Two Hundred Fourty Three Only

38 7.7.12 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 120 sq. mm, 3.5 core Metre 100 1186 Rs. One Thousand One Hundred Eighty Six Only

39 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) Sq.Ft 56 1809 Rs. One Thousand Eight Hundred Nine Only

40 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. Each 5 6536 Rs. Six Thousand Five Hundred Thirty Six Only

41 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 129 2482 Rs. Two Thousand Four Hundred Eighty Two Only

42 8.17.1 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 300 mm sweep Each 17 2572 Rs. Two Thousand Five Hundred Seventy Two Only

43 BR Code 1824 Supplying 20 mm X 3 mm copper tape ( 0.533 kg/mtr) KG 10 710.84 Rs. Seven Hundred Ten And Eighty Four Paise Only

44 7.7.9 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 50 sq. mm, 3.5 core Metre 80 561 Rs. Five Hundred Sixty One Only

45 Approved by SE 14.07.2026 Supplying installation and commissioning of silent type, air cooled 20 kva DG set with all as required Set 1 598050 Rs. Five Lakh Ninety Eight Thousand Fifty Only

46 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required. Set 4 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

47 Rate from Bihta Fire hydrant Construction of cemented platform of minimum 2 feet height from finished ground level of suitable size as prescribed by manufactrurer of DG set with polycarbonate sheet roof shelter framed on iron frame structure etc as required to install 10 KVA DG silent Set 1 115885 Rs. One Lakh Fifteen Thousand Eight Hundred Eighty Five Only

Lighting Conductor

48 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required. Set 2 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

49 4.1 Providing and fixing of lightning conductor final made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes tec. Complete as required. Each 6 1056 Rs. One Thousand Fifty Six Only

50 4.5 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For Horizontal run) Metre 130 516 Rs. Five Hundred Sixteen Only

51 4.6 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For vertical run) Metre 45 559 Rs. Five Hundred Fifty Nine Only

Rs. Fourty Seven Lakh Eighty Thousand Three Hundred Ninety Six Only

Numbers of item 50 (Fifty)

Electrification Work - Campus Light

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 1.15.2 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ reeessed PVC conduit as required. 2 x 1.5 sq.mm Metre 245 66

2 2.1.2 Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required. 32 Amp double pole Each 1 1946 Rs. One Thousand Nine Hundred Fourty Six Only

3 3.2 Earthing with GI earth pipe 4.5 meter long and 40 mm dia including accessories, and providing masonary enclosures with cover plate having locking arrangment and watering pipe etc.with charcoal and salt as required . Per Set 1 6323 Rs. Six Thousand Three Hundred Twenty Three Only

4 3.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I.wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and refilling etc. as required. Metre 5 278 Rs. Two Hundred Seventy Eight Only

5 5.14.4 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 90 watt Each 20 5516 Rs. Five Thousand Five Hundred Sixteen Only

6 7.1.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq.mm. Metre 280 315 Rs. Three Hundred Fifteen Only

7 7.7.2 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 6 sq. mm, 4 core Metre 310 206 Rs. Two Hundred Six Only

8 8.23.1 Supply and erection of 7 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, made of 3 mm thick sheet along with base plate of size 260 X 260 X 16 mm, small door opening for junction box mounting including 64 'C' series SP MCB, conneclor, and suitable size foundation bolts with template as required.(but without pole foundation) Single arm, 1000 mm Each 20 27432 Rs. Twenty Seven Thousand Four Hundred Thirty Two Only

9 9.13.1 Providing , laying and fixing of following dia G.l. pipe (medium class) in ground complete with G.l. fittings including trenching (75 cm deep) and re-filling etc as req uired. 50 mm dia Metre 16 849 Rs. Eight Hundred Fourty Nine Only

10 10.3.3 Supplying, installation, testing and commissioning of Astronomical time switch capable of following output in feeder pollars / Lighting DB's for automatic switching ON & OFF of strret lights at sun set & sun rise of twilight (Auto ON, Auto OFF, Auto) with manual override facility with 12124 hour display format with suitable battery and indication for relay status i/c programming at site complete as requiired. 3 output (1 output per phase) and suitable for three phase supply Each 1 11194 Rs. Eleven Thousand One Hundred Ninety Four Only

Rs. Eight Lakh Sixty One Thousand Six Hundred Twenty Seven Only

Numbers of item 10 (Ten)

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 EXECUTIVE TABLE Table with ERU and Pedestal with KBPT, CPU Trolley - Structure / Frame of table - Four legs with modesty panel. The type of Storage provided- One side pedestal unit and E.R.U. Footrest-Not Provided.Table top Material- Prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates Thickness of table top material - 25 mm. Gable end material- Prelaminated particles board(wood product) of grade II type III of IS 12823/ Latest. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the modesty panel material- 18 mm. Leg Material- Mild Steel (MS) ERW. The thickness of the Leg material- 1.2 mm. Width of tabletop - 1800 mm. Depth of table - 750 mm. Height of table - 750 mm. Size (L x W) /diameter of leg material - 25 mm . ERU unit consists of - 1 storage unit with shutter. Total Number of drawers /storage in Pedestal units- Each 6 38205.2 Rs. Thirty Eight Thousand Two Hundred Five And Twenty Paise Only

Three drawers. Table top finish- Laminate in color with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/ Latest with having balancing laminate of 0.5mm thick on another side Tabletop shade- Gray. Table / ERU / Pedestal Panel Plain Side Edge to be banded with PVC tape - 2 mm thick with the help of hot melt glue. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate.

2 Conference Table 8 person Conference Table Plt Stage Table (1350 X 600 X 750) 4Nos. Material of work top -25 mm thick prelaminated particle board, Table top plain side-Edge banded with PVC tape of 2 mm thick with help of hot melt glue, Material of Gable end and modesty panel-18 Mm Thick Three Layers Prelaminated Particle Boards Of Grade-II Type-III Of IS:12823/Latest Both Sides Particle Boards Matching With Top Shade In Grade-II Type-III, Length of Each Seat of Work Top ± 20 mm- 675 mm for single AND 1350 mm For dual,Depth of Work Top-600mm, Height of Work Top-750 mm, Corners of work top -850 mm, Table top finish-Laminate In Colour With matt Finish 0.6-0.8 Mm Thickness Of Type S,F Or P Having Index Number 3.2.3 Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 8 70569

3 EXECUTIVE CHAIR High Back Chair- Tilt mechanism - Synchronic tilt mechanism. Backrest type - Tilting type. Pedestal Base - Nylon Minimum density of foam used in seat- 30 kg per cubic meter Minimum thickness of PU foam used in seat - 30 mm Seat upholstery material- Fabric. Backrest base frame material - Hot pressed plywood. Padding at backrest - PU foam The minimum density of foam used in the backrest- 30 kg per cubic meter. Minimum thickness of PU foam used in backrest 30 mm . Backrest upholstery material - Fabric. Upholstery material thickness / fabric substance used in seat /backrest - 0.7 to 1.5 mm ( for fabric). Only Seat Size Is 480mm(L) x 500mm(D) Back Size Is 460mm(L) x 510mm(H) Seat Maximum Height Is 550mm & Minimum Height Is 450mm Back Height From Floor Maximum Is 1050mm & Minimum Is 950mm . (Green Guard by U/L). Dimension variation of ± 5mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 6 16231.6 Rs. Sixteen Thousand Two Hundred Thirty One And Sixty Paise Only

4 OFFICE TABLE Table with KBPT, CPU Tolley - made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size- 1200 X 600 X 750 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. (Green Guard by U/L, Griha Certificate). Dimension variation of ± 5 mm shall be acceptable. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 30 25446.3 Rs. Twenty Five Thousand Four Hundred Fourty Six And Thirty Paise Only

5 STAFF CHAIR (S TYPE) CHAIR- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size - 46.0 cm ( W ) X 27.0 cm ( H ). Seat Size- 46.0 cm ( W ) x 40.0 cm ( H ). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame. Width of the chair- 58 cm, Depth- 56.5 cm, Height- -87.5 cm, Seat Height- 48 cm. Dimension variation of ± 5mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 30 7087.3 Rs. Seven Thousand Eighty Seven And Thirty Paise Only

6 VISITOR CHAIR Chair Type - Non-Revolving and Non-Tilting chair without Armrest. Chair frame type- Cantilever. Armrest type- Without Armrest. Seat type - Padded. Backrest type - Padded Frame, Material Configuration - One piece. Frame material - Steel tube (ERW quality) conforming to IS: 1161 (with latest Amendment). Seat material - Moulded Plywood. Seat material thickness - 20 mm. Polyurethane foam used in seat. Seat upholstered with -N.A . GSM of seat cover - 390 GSM . Backrest material- Moulded Plywood . Backrest upholstered with- Leatherette. Seat Depth 390 mm . Seat Width - 440 mm Seat height from floor surface - 475 mm Backrest width 390 mm . Backrest height from seat - 300 mm . Paint Type- Epoxy. CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 70 4004 Rs. Four Thousand Four Only

7 VISITOR CHAIR VISITOR CHAIR, With Armrest -All Over Size Is : 520mm (L) X 470mm (D) X 930mm (H), The Chair Made Of Full Fabric In Black Colour. Details : Arms : Fixed Armrest, Padded Armrest. Use Of Ply : 12 Mm Thick Hot Pressed Bwr Plywood (Is Grade - 303 For Seat And Back). Seat : 40 ± 2 Mm Thick Polyurethane Foam With Density 32 (±3) Kg Per Cu Meter For Best Quality Cushioning In Seat. Back : 40 ± 2 Mm Thick Polyurethane Foam With Density 32 (±3) Kg Per Cu Meter For Best Quality Cushioning In Back. Backrest Support Foam Design Based On Symmetrical Lumbar Support. Only Seat Size Is 520mm (L) X 470mm (H). Back Height Is @ 930mm. Fixed Cantilever Chair. Base : M.S. Powder Coated Tubular Frame Of Cantilever Type. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 70 6521 Rs. Six Thousand Five Hundred Twenty One Only

8 ALMIRAH Type of Almirah Steel- Almirah steel welded with shelving cabinet. Storwel neo welded construction adds to the sturdiness of the almirah and also ensure durability of the almirah.Nmber of Door - 2. Number of shelves - 04. Powder Coating - with 50 micron thickness minimum. Bod- Body panels are made fom combination of 0.5 and 0.6mm CRAC. Hardware - Main shutter Lock- 3 way 90 degree removable key type cam lock & locking mechanisam. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 30 33458.7 Rs. Thirty Three Thousand Four Hundred Fifty Eight And Seventy Paise Only

9 Steel Rack ' Steel Rack of size 6*36*18.Steel MF System of size 6"x36"x18" with Six Shelves Prime quality CRC sheet conforming to IS 5130/10748/5986. The pitches of the slots at 19.05 mm, Panel/Shelves: 6 Bnd bending process of 905L x 4480 of load capacity 80 Kgs. UDL Max Per shelf. Shelf Material-0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513, Angle Posts Material and size-Rolled steel angle posts of 40 X 40 X 1.8 mm, MS Sheet Thickness of Shelves and Back (Minimum) in mm-0.8, Paint-Powder coated with Lead Free Paint Company CERTIFICATE-ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC BIFMA , Indoor Advantage Gold Certificate. Each 20 10616 Rs. Ten Thousand Six Hundred Sixteen Only

10 RECEPTION TABLE Work Surface -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA ( IS: 513 ), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Each 2 70297.7 Rs. Seventy Thousand Two Hundred Ninety Seven And Seventy Paise Only

Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories - Wire Riser made of 0.8 mm CRCA ( IS-513 ) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA ( IS-513 ) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA ( IS-513 ) is provided for bag hanging. The product should be Greenguard UL certified. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate.,Green Guard by U/L ..

11 RECEPTION CHAIR Mid Back Chair - Size- 590MM (L)X 660MM (D)X 1080MM (H). Seat Upholstry- Fabric.Back Upholstry- Fabric. Seat Height- 538 mm. Warranty- 3 Years. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0 cm pitch-center dia. (76.0 cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 2 11017.6

12 SOFA (3 SEATER) 3 Seater Sofa Frame Structure Material - 19 mm commercial board, Seat Cusion Material-foam, Type of Spring in the Base / Seating- web suspension, Type of Sofa and Backrest- Seat and Backrest are permanently fixed with the frame Structure, Frame Covering- Fully Upholstered, Density of Cushion of Backrest Material (Kg/Cubic M) - 32, Covering Material for Seat and Backrest-Leatherite.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 8 27967.5 Rs. Twenty Seven Thousand Nine Hundred Sixty Seven And Fifty Paise Only

13 CENTRE TABLE COFFEE TABLE - Number of storage under top Double storage (one at upper portion and one at bottom portion) Top material - Other wood. Frame material - Other wood Dimension of Top ( Length X Breadth, or Diameter) 900 mm X 600 mm . Height of centre table- 450 mm .Thickness of top material - 18 mm . Thickness of frame material - 19 mm. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Each 4 12312.3 Rs. Twelve Thousand Three Hundred Twelve And Thirty Paise Only

14 COMPACTOR COMPACTOR 1 BAY - 1 Bay (Static body - 1 + Single faceb movable -1 + Double faced - 3+rail 2400+1600).OPTIMIZER PLUS-PUSHPULL (1200W, 400D,1980H).Optz Plus SS1, Optz Plus SL1, Optz Plus TM1 Solid back panel.CHANNELS (RAILS)- Optz Plus P1/P2 CHNL 1600mm. Optz Plus P1/P2 CHNL 2400mm . The product should be, GREENGUARD UL & Griha certified (Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Each 2 404998 Rs. Four Lakh Four Thousand Nine Hundred Ninety Eight Only

15 REVOLVING CHAIR COFFEE TABLE - Number of storage under top Double storage (one at upper portion and one at bottom portion) Top material - Other wood. Frame material - Other wood Dimension of Top ( Length X Breadth, or Diameter) 900 mm X 600 mm . Height of centre table- 450 mm .Thickness of top material - 18 mm . Thickness of frame material - 19 mm. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 8 11017.6 Rs. Eleven Thousand Seventeen And Sixty Paise Only

16 METAL SINGLE BED METAL BED with mattress - Structure of Metal bed frame including legs and head Structure-MS Hollow Rectangular / Square Section.Size of Rectangular Hollow section - 50 mm X 25 mm. Size of Square Hollow Section - 38 mm X 38 mm Size of Circular Hollow Sections - N.A.Thickness of Hollow Section in Structure-1.2 mm. Support Panel for placement of mattresses- MS hollow box Square Section.Thickness of support Panel -1.0 mm. Over all length of Bed - 2000 mm. Height of Bed in mm - 650 mm. Paint /Finish of MS Parts-Powder Coating. Min Powder/paint coating thickness ( Micron) - 60 micron. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 2 23751.2 Rs. Twenty Three Thousand Seven Hundred Fifty One And Twenty Paise Only

17 DINING TABLE (6 SETER) Cafeteria table of size Upbeat cafeteria table with cube leg & PU Top of size- 1800 x 750 x 750. (Certificate- Green Guard by U/L). Dimension variation of ± 5 mm shall be Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 2 22850.3 Rs. Twenty Two Thousand Eight Hundred Fifty And Thirty Paise Only

18 DINING CHAIR MS Chair - Shape of the Cafeteria Chair Seat - Any Other Shape. Chair Armrest - Without Armrest. Material of Chair Seat - Moulded Plastic , Seat with Cushion - No. Thickness of Cushion for Seat - 0 millimeter,Upholstery Material of Seat- Not Applicable. Material of Chair Back- Moulded Plastic. Back with Cushion- No Thickness of Cushion for Back. 0 millimeter. Density of Back Cushion Kg/m3 - 0. Material of the Chair Under structure - MS Powder Coated. Height of Chair Seat from ground - 459 mm. Overall Height of Chair from ground - 818 mm. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1/ BIFMA Level 2, Indoor Advantage Gold Certificate. Each 12 3430.9 Rs. Three Thousand Four Hundred Thirty And Ninety Paise Only

19 WHEEL CHAIR FOLDING WHEEL CHAIR - Total weight of Wheel Chair ( Kg ) - 8. Back rest with Cushion- Yes, With Cushion on Seat . Leg guard type- Swinging and Detachable. Slope of Seat ( Degree ) - 0. Type of Back rest - Foldable. Overall Length (mm) - 790. Foldable - Yes. Types of Wheel Chairs- Attendant Controlled Non Powered. Frame tube thickness (mm) - 1.2. Clearance of frame from floor ( mm ) - 0. Overall Height ( mm )- 870 . Loading Capacity ( Kg ) - 100. Arm rest Type - Fixed. Cushion Material Thickness ( mm ) - 30. Seat Depth ( mm ) - 400. Distance between seat and foot rest ( mm ) - 420. Clearance of footrest from floor ( mm) - 150. Finish of Aluminium casts- Anodized. Hand Rim - With. Handle for push/pull action of Wheel Chair- Yes. Thickness of Seat ( mm ) - 30. Slope of the backrest with respect to floor ( Degree ) - 90. Rear wheel tyre type Solid- Arm rest height from seat ( mm ) - 105. Cushion on Arm rest- With. Types of foot rest - Swinging without Height Adjustment Frame tube Dia ( mm ) - 22. Width of wheel chair- Fixed. Seat Height- Fixed. Seat hight from floor at the front ( mm )- 520. Thickness of back rest (mm) - 10 Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC,BIFMA Level 1, BIFMA Level 2, Indoor Advantage Gold Certificate. , CE Certificate, ISO-13485:2016, Each 2 27065.5

20 Dustbin 13 Litre Stainless Steel Grade-304, Capacity-13 Litre pedal operated Each 10 3554.1 Rs. Three Thousand Five Hundred Fifty Four And Ten Paise Only

21 Dustbin 120 Litre HDPE plastic, 100% virgin plastic, reinforced walls, UV protected outdoor bin with 200 mm rubber-tired wheels for mobility, hinged lids securely fitted. Capacity-120 Litre. Each 10 6988.3 Rs. Six Thousand Nine Hundred Eighty Eight And Thirty Paise Only

22 RO Water Purifier 80 Litre RO water purifier inbuilt RO UV purification water coolers, Body Material stainless steel, cold water temperature-15 to 45 Degree C, Cooling capacity - 60 LPH, No of faucets-2, Refrigerant-R134a, Current-4.5 +-10%A, voltage-230 +-10% V AC, Frequency-50 Hz, 1 Phase, RO purification, 7 stages of filtration, fully automatic, faster cooling Low Power Consumption, High output Each 3 51584.5 Rs. Fifty One Thousand Five Hundred Eighty Four And Fifty Paise Only

23 RO Water Purifier 50 Litre RO water purifier inbuilt RO UV purification water coolers, Body Material stainless steel, cold water temperature-15 to 45 Degree C, Cooling capacity - 60 LPH, No of faucets-2, Refrigerant-R134a, Current-4.5 +-10%A, voltage-230 +-10% V AC, Frequency-50 Hz, 1 Phase, RO purification, 7 stages of filtration, fully automatic, faster cooling Low Power Consumption, High output Each 2 44579.7 Rs. Fourty Four Thousand Five Hundred Seventy Nine And Seventy Paise Only

24 AC 1.5 Ton Voltas, Blue Star or Equivalent Ac-1.5 Ton 5 Star split inverter with Wi-fi, Split Air-Conditioners:- Driling holes into a brick wall to take out the pipes (excluding core cutting)-Fixing a hole sleeve & Cap - Fixing & connecting indoor and outdoor units with copper pipes & installation of drainage pipes using the standard kit provided by the manufacturer-installation of separately purchased power plug, MCB & power stabilizer-Temperature & gas pressure testing including Five year maintenance. Each 12 77000 Rs. Seventy Seven Thousand Only

25 TV 32' Fully Smart TV voice assistant, LED full HD Design, slim, glossy black design with thin bezels (VNB), suitable for compact spaces. Each 4 25534.3 Rs. Twenty Five Thousand Five Hundred Thirty Four And Thirty Paise Only

26 Sanitary Napkin Vending Machine (Automatic) Automatic, wall mounted, any size napkin intact, operating free, number of napkin-50, Body mild steel 1 mm thick, antirest powder coated, stock massage-Auto senior, ISI mark, warranty-03 Years Each 1 40274.3 Rs. Fourty Thousand Two Hundred Seventy Four And Thirty Paise Only

27 Sanitary Pad In Cinerator Machine Automatic (Autostart), wall mountable, electronically operated, front load, two chambers, thermal insulation body of MS sheet 1.0 mm powder coated, exhaust pipe, detachable ash tray, ceramic heater overload protector, electronic thermostat based auto cutoff warranty-03 Years Each 1 42642.6 Rs. Fourty Two Thousand Six Hundred Fourty Two And Sixty Paise Only

Grand Total Including GST

Rs. Sixty Eight Lakh Six Hundred Sixty Four Only

Numbers of item 27 (Twenty seven)

Godrej or equivalent brand confirming to the above specification & certification.

G E N E R A L A B S T R A C T

NAME OF WORK : CONSTRUCTION OF S.P. OFFICE BUILDING (G + 3 STRUCTURE) AT BEGUSARAI IN THE DISTRICT OF BEGUSARAI - WITH ELECTRIFICATION Job No. GROUP- 02 OF e-N.I.T. No. 16 /SBD /2026-27

Date of Tender :-

Estimated Cost in Rs. :-

Earnest Money in Rs. :-

Time of Completion :- Months

Cost of BOQ in Rs. :- 10000

Bid processing fee through online mode:- As per eproc 2.

SL. NO NAME OF WORK TOTAL Rs P

S.P. Office Building

2 Sanitary Installation

4 Boring - 2 Nos

5 Compound Wall- 600 Rft

7 Campus Development

8 Approach Road

10 Rain Water Harvesting System

11 Horticulture

Add GST @ 5.36%

12 Fire Fighting

13 Electrification Work

14 Electrification Work - Campus Light

Enclosure-B.O.Q's ORDER

(1) B.O.Q. amounting to Rs.

Rs. Seven Crore Twelve Lakh Fifty Four Thousand Nine Hundred Twenty Four Only

detailed as above for Scheduled items, is herewith approved.

Junior Engineer Asstt. Engineer Executive Engineer Superintending Engineer, BOQ BOQ BOQ Work Circle -1