E1-4886-2024-Reparis and maintenance to shredder machines in all MCCs for 6 months in Erode City Municipal Corporation.

Amount

Supply, delivery and replacement of VAF Digital meter including wiring charges for panel board

Supply, delivery and replacement of Single phase preventer including wiring charges for panel board

Supply, delivery and replacement of Current Controlling device CPR 003 including wiring charges for panel board

Supply, delivery and replacement of Voltage monitoring relay including wiring charges for panel board

Supply, delivery and replacement of 18 A Contactor including wiring charges for panel board

Supply, delivery and replacement of 200 VA Transformer including wiring charges for panel board

Supply, delivery and replacement of Conveyor belt after removal of entire set up including shaft, bearing and damaged old belt and aligning the set up after replacement of new conveyor belt

Supply, delivery and replacement of 6005 metal shield bearing including removal of shaft, old bearings etc complete

Supply, delivery and replacement of 33214 taper roller bearing after removal of entire shaft, cutter blades etc and alignment of entire set cutter blades and bearing set up.

Supply, delivery and replacement of Oil seal (105*125*13)

Supply, delivery and replacement of Oil seal (70*100*10)

Supply, delivery and replacement of Weighing scale battery including wiring charges for circuit boards

Supply, delivery and replacement of Weighing scale display including wiring charges for circuit boards

Supply, delivery and replacement of Weighing scale transformer including wiring charges for circuit boards

Supply, delivery and replacement of Weighing scale circuit board including wiring charges for circuits

Labour charges for application of high temperature high quality grease for cutter blade bearings and cutter blades and replacement of lubrication oil for output conveyor belt gear box.

Supply, delivery and replacement of 5mm 3ply PVC conveyor belt of length 8750 mm and width 590 mm with 11 nos stoppers of length 400mm width and 30mm height and including charges for alteration of existing conveyor frame set up

Labour charges for removal of 0.25 HP motor for conveyor belt, rewinding and re replacement of the same after completion of work including lathe charges and replacement of bearings

Labour charges for removal of 10 HP motor for cutter blades, rewinding and re replacement of the same after completion of work.

Supply, delivery and fixing of adaptor for RO system

Supply, delivery and fixing of taste filter for RO System

Supply, delivery and fixing of float for RO System

Supply, delivery and fixing of 5 mtrs water tube for RO System

Charges for supply and fixing of light for fly catcher machine

Charges for supply and fixing of heater for fly catcher machine

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point

Supply, delivery and replacement of H315 roller bearing after removal of entire shaft, cutter blades etc and alignment of entire set cutter blades and bearing set up.

Charges for dismantling of entire machine, cleaning, aligning, welding, lathe charges, assembling and commissioning of shredder machine including all labour, conveyance etc as directed by departmental charges, etc complete

Supply and delivery of 120 W LED Street light fitting system made of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP65. Separate compartment for LEDs & electronic driver with CCT of 4100K-6000K , PF > 0.9. System efficacy >85. Operating voltage range of 140V to 270V with surge arrestor Minimum of 4KV. Driver current not than 700mA. THD < 10%. Lumens package not less 100 lm/W for LED Source. Test certificate from NABL(National accredited board for Testing & Calibration laboratory) for LM79 report. In house Testing facility to be available for the same, Lamp life not less than 50,000 Hours etc; complete as per Standard Specification. The power supply should be of 1100V copper flexible cable of PVC insulated unsheathed 2 core x 1.5sqmm in 2.5 metre length. The rate includes the labour charges for fixing new 100 W LED lamp fitting and termination etc; complete as directed by the departmental officer.

BALAGURU INFRA (BID ID -1210539)