Additional Improvement works to the Public Toilet at Kallukuli street in Ward No 94, South Zone.

Amount

HGSSS.20.B. Earth work excavating and depositing on bank with initial lead of10m & initial lift of 2min Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B

Conveyance of surplus earth from work site to city outer with average lead of 15 km as per departmental standards etc complete.

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such aswater providing etc., complete as per standard specification

Supply and erecting centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC slabs, Rectangular beems, Tee (or) ECC Beam, Lintel, Bed Block, Staircase waist and landing slabs landing beams, canopy etc., in all floor with all cross bracings using mild steel sheets of size 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25 x3mm for boarding laid over country wood joinsts of size 10cm x 6.50 cm spaced at about 90cm c/c and supports by Causrina props of 10cm to 13cm dia spaced at 75cm c/c etc., completed as directed. Sl.No.123

Supplying and erecting centering for side and soffits including necessary supports and strutting upto 3.29m high for plane surfaces such as side slabs of RCC boxing and similar vertical RCC slabs, FACIA, Drop etc., in all floor with all cross bracing using mild steel sheets ofsize of 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25x25x3mm for boardinglaid over country wood joists of size 10cm x 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 75cm C/C etc., completedas directed. Sl.No.123B Part-II

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm x 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. Sl.No.122

Reinforced Cement concrete1:1.5:3 (one cement, one and half M Sand & three course aggregate) using 20mm gauge hand broken / and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc., complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Supplying and fabricating and placing in postion MS or RTS Bar reinforcement to all RCC Works as per the design given including cost of steel and bending wire also all floors.

Fly ash Brick work in CM 1:5 (one cement & five sand) using size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard

Supply of MS Gate using alround MS 'L' Angle and Cross Bearing using MS Plate and Grills with one Coat of Red Oxide Primer as per Departmental Standards etc Complete.

Fixing in position mild steel grills Petty iron work for truss, straps etc., (wrought & fixed) labour only

Plastering the exposed surface of RCC works in cement mortar 1:3 mix 10mm thick etc complete and as directed by the departmental officers

Plastering in Cement Mortar 1:5 mix 12mm thick etc complete and as directed by the departmental officers

Painting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Supplying and Laying TAMIN Block Providing and laying of 80 mm thick high strength type conforming IS 15658 -2006 of TAMIN Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Supply and Fixing of FRP Manhole Cover etc complete and as directed by the departmental officers

Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 %

TNEB Charges

Add :- GST @ 18%

SHARVESH AND COMPANY (BID ID -1301522)