REPAIRS AND MAINT OF LOW TENSION OVERHEAD/UNDERGROUND DISTRIBUTION SYSTEM AT N AREA AND HALLOMAJRA UNDER GE CHANDIGARH.

Amount

Excavation in trenches in any type of soil not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth; for laying of cable,poles stay etc. and getting out complete all as specified.

Excavation in trenchs .exc. 1.5 mtr in depth but not exceeding 3 mtr in depth and getting out in any type of soil complete all as specified.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each complete all as specified.

Removing excavated spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified.

Sand cushioning with clean dry sand to cables with layer of sand 8cm before laying of cable and 15cm thick after laying of cable complete all as specified. Note : For payment purpose punned thickness of 18cm shall be measured against spread thickness of 23cm as mentioned in para 19.75 of SSR part-I

Supply and laying of class B bricks for under ground cable protection as directed by Engineer- in - charge

Taking out existing damage/unservisable PVC\ XLPE insulated, armoured, aluminium conductor 1100V grade cable of any size and core from trenches, pipes, walls and/or poles, complete all as specified . Note: Excavation and earthwork shall be measured and paid for separaetly

Supply & Laying of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cables (heavy duty) cross sectional area 400 sq. mm, 3.5 core,stranded aluminium conductor including cable glands, cable lugs etc , to suit the cable size, 1100 volt grade, ISI marked, laid in trenches or fixing along the poles or passing through the pipes or laid under floors or through walls/ducts etc. complete all as specified.

All as per item No 08 above but cable of size 240 Sqmm, 3.5 core

All as per item No 08 above but cable of size 185 Sqmm, 3.5 core

All as per item No 08 above but cable of size 120 Sqmm, 3.5 core

All as per item No 08 above but cable of size 95 Sqmm, 3.5 core

All as per item No 08 above but cable of size 70 sqmm 3.5 core

All as per item No 08 above but cable of size 50 Sqmm, 3.5 core

All as per item No 08 above but cable of size 35 Sqmm, 3.5 core

All as per item No 08 above but cable of size 25 Sqmm,3.5 core

All as per item No 08 above but cable of size 25 Sqmm, 2 core

All as per item No 08 above but cable of size16 Sqmm, 4 core

All as per item No 08 above but cable of size 16 Sqmm, 2 core

All as per item No 08 above but cable of size 10 Sqmm, 4 core

All as per item No 08 above but cable of size 10 Sqmm, 2 core

S&F in repair heat shrinkable end joint (indoor/outdoor) for 1100 volt grade XLPE cable of size 400 Sqmm to 500 Sqmm, 3.5 core complete all as specified

All as per item No 22 above but of size 185 Sqmm to 300 Sqmm, 3.5 core complete all as specified

All as per item No 22 above but of size 70 Sqmm to 150 Sqmm, 3.5 core complete all as specified

All as per item No 22 above but of size 25 Sqmm to 50 Sqmm, 3.5/4 core complete all as specified

All as per item No 22 above but of size 4 Sqmm to 16 Sqmm, 3.5/4 core complete all as specified

S&F in repair heat shrinkable straight through joint for 1100 volt grade XLPE cable of size 300 Sqmm to 400 Sqmm, 3.5 core complete all as specified

All as per item No 27 above but of size 185 Sqmm to 240 Sqmm, 3.5 core complete all as specified

All as per item No 27 above but of size 70 Sqmm to 150 Sqmm, 3.5 core complete all as specified

All as per item No 27 above but of size 25 Sqmm to 50 Sqmm, 3.5/4 core complete all as specified

All as per item No 27 above but of size 4 Sqmm to 16 Sqmm, 3.5/4 core complete all as specified

S&F in repair 100 mm bore Tubes ‘light grade’, galvanized with all fittings, laid in trenches or fixed along poles with mild steel clamps, as protection to cable, complete all as specified .

S&F in repair 80 mm bore Tubes ‘light grade’, galvanized with all fittings, laid in trenches or fixed along poles with mild steel clamps, as protection to cable, complete all as specified .

S&F in repair 50 mm bore Tubes ‘light grade’, galvanized with all fittings, laid in trenches or fixed along poles with mild steel clamps, as protection to cable, complete all as specified .

S&F in repair 40 mm bore Tubes ‘light grade’, galvanized with all fittings, laid in trenches or fixed along poles with mild steel clamps, as protection to cable, complete all as specified .

Supply & install steel tubular pole swaged welded with MS base plate size 30cm x 30cm x 6mm thick final taper plug bolts nuts & washers as per IS: 2713 (part-I) 1980 made out of MS tubing including painting of two coats of aluminium paint of approved quality over one coat of red oxide primer length 9.00 mtr long 410 SP -31 using for any description of external electric work including dismantling of old unsv RCC pole all as specified and directed by Engr-in-charge. Note: Earthwork, PCC work in foundation & coping of pole, cross arms, danger notice board and anti climbing devices shall be measured and paid separately.

S&F street light bracket made out of 40/32mm dia fancy type top mounted, 1.50 mtr long GI tubing, "medium grade" ISI marked, bent to required shape and angle as per site requirement with and including MS clamps size 30X6mm, with nuts, bolts, washers etc for fixing street light fittings and bracket, duly painted with two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed.

S&F street light high wattage (45/60 Watts) street light fittings energy efficient Intergral type LED 60W ,IP 66,PF > 0.9,lumins 100/watt Street light luminaire comprising of epoxy powder coated hsg, enclosed with glass cover in frame mounted testing compelte all as specified and directed.

S&F PVC insulated copper wire FRLS of size 2.5 Sqmm (nominal area) 3 core for street light as directed by Engr -in-charge.

M&L for Cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in foundation filling & mass concrete for poles/struts/stays assembly including provision of necessary form work complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate in coping/padestal to poles including provision of necessary form work finishing the exposed surface even and smooth in cement mortar 1:3 and applying two coats of white wash complete all as specified and directed.

Material & Labour for PCC (1:2:4) type C-1 (using 20 mm graded black trap/granite/basalt stone aggregate) for coping of the pole including necessary form work complete all as specified and directed.

Boring of holes under road,pavement.hard standing by trenchless technology using ultra sounding technique and necessary machine for inserting GI pipe upto 100mm dia complete all as specified and as directed.

Preparation of surfaces of LT Steel poles by and painting applying one coats of aluminium paint and writing pole number in black and yellow. Strip upto 1.5 mtr height at an intervals of 30cm each from the ground level and above coping for 09.00 mtr pole including Pole marking (Pole Numbers in 12 cm round circle in white colour and marking of pole numbers with black colour word size 7 cm long) all as directed at site.

S&F plastic rectangular sintex SMC/FRP junction box for street light pole including MCB 6 Amp and terminal with MS clamps nut bolts and washer of approved size of LT pole for street light pole box complete all as specified and as directed.

Note: For the purpose of arriving at lumpsum amount, the amount of credit schedule i.e Sch 'A' section II (i.e Rs 80,605.00 shall be deducted from the total amount arrived.

Total of Schedule 'A' Rs.

R N Enterprises (BID ID -3490902)

LA ENTERPRISES (BID ID -3490151)

Jai Maa Electrical Works (BID ID -3497028)

Ess Ess Engineers (BID ID -3490884)

Bharat Enterprises (BID ID -3495001)