ADDN/ALTN/IMPROVEMENT TO CERTAIN SMQs AT HQ EAC U AF SHILLONG

Amount

Demolition of brick work or stone / boulder/precast concrete block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing the debris and rubbish to a distance not exceeding 100 m, complete all as specified and directed. (Note : reinforcement cut as required to facilitate demolitions)

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m, complete all as specified and directed.

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frame,exc 1.5 Sqm but not exc 4.00 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or any thickness in floors, aprons etc laid, bedded and pointed in cement mortar complete all as specified and directed.

Taking up or down GI tubing of 15mm bore and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down GI tubing of 20mm bore and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

M&L for precast cement concrete block masonary with solid block type C-1 (1:3:6) using 20mm graded stone aggregate exc 10 cm in width and built in cement mortar 1:6, complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutters/roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for aluminium snap grid frame work for false ceiling of suitable size panel with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete as per manufacturer's instructions including fixing of nut, bolt and clamps with the help of drilling machine complete all as specified and as directed

M&L for 6mm thick non asbestos fibre cement building boards fixed or laid /inserted to aluminium framework with screws if required all as per manufacturer's instructions complete all as specified and directed.

M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar (1:4) in two layers (10 mm thick in first layer and 5 mm thick in second layer) finished even and smooth (without using extra lime or cement) mixed with water proofing compound as per manufacturer’s instruction on top/second layer of plaster, complete all as specified and directed. (Note : WPC shall be measured & paid separately).

M&L for rendering 5mm thick in cement mortar 1:3 on ceiling and soffits of staircase, waist slab or concrete surface finished even and smooth without using extra cement, complete all as specified and directed.

Supply only liquid water proofing compound approved quality, complete all as specified and directed.

M & L for PCC ( 1:2:4) Type B-0(using 12.5mm graded stone aggregate) as in roof padding including formwork, if required,complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in levelling course/sunken floor etc to floor finishes complete all as specified and directed.

M&L for joint free, coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm but n.exc 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6, complete all as specified and directed.

M&L for joint free, coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 Sqm but n.exc 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6, complete all as specified and directed.

M&L for joint free, coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 Sqm but n.exc 0.38 Sqm, as in skirting, dado, riser to steps etc, etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 350x250x7mm/450x350x7mm to 8mm thick in vertical surface set and jointed in neat cement slurry pointed with white or coloured cement to match over and including 10mm thick rendering in cement plaster 1:4, complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in floor, cooking platforms and like complete over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M & L for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays not exc 2 Sqm each and finished the surface fair and even without using extra cement , providing joints though out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

M & L for PCC (1:2:4) , type B-0 (using 12.5 mm graded crushed stone aggregate) in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including formwork if required , complete all as specified and as directed

M&L Reinforced cement concrete M 25 (Design Mix) using 20mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. (Note : Reinforcement and form work will be measured and paid separately under relevant items)

M&L Reinforced cement concrete M 25 (Design Mix) using 20mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and directed. (Note : Reinforcement and form work will be measured and paid separately under relevant items)

M & L for steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc (fair finished flat surfaces) complete all as specified and directed.

M & L for steel form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat surface (Fair finished surfaces ) complete all as specified and directed.

S & F TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

S & F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in strirrups, spacers and binders spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

M & L for weather boarding of 2nd class hard wood clean sawn, plain 20mm thick or feather edged 15mm to 20mm thick with 30mm laps, complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or in cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) exc half brick but not exc one brick thick, complete all as specified and as directed.

S & F 105 x 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S & F 165 x 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, all as per specification & drawing complete and as directed.

S & F 35 mm thick, factory made, Second class hardwood, glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, etc complete all as specified and directed.

S & F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet used,. Stile and rails feathered at edges prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side pre laminated PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as directed.

S & F for Powder coated aluminium work (minium thickness of powder coating 50 micron) for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS :1285, fixing with dash fasteners of required dia and size, including filling up the gaps at juctions, i.e at top , bottom and sides with required EPDM rubber/neoprene gasket etc, aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required cleat angle, aluminium case, beading for glazing , handles CP, stainless steel mesh complete all as specified and as directed.

M & L mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F 5.5mm thick Sheet glass, ordinary quality and glazing in aluminium section in square exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Stainless steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and directed.

S & F 100mm size, Butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.

S & F 75mm size, Butt hinges of stainless steel and fixed complete all as specified and directed.

S & F 150 mm size, Aluminium handles, cast type, anodised complete all as specified and directed.

S & F 100 mm size, Aluminium handles, cast type, anodised complete all as specified and directed.

S & F 200 mm long, Aluminium anodised, barrel tower bolts of extruded section fixed, complete all as specified and directed.

S & F 100 mm long, Aluminium anodised, barrel tower bolts of extruded section fixed, complete all as specified and directed.

S & F 300 mm long, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S & F 150mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete, all as specified and directed.

S & F 100mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F 140mm size floor door stopper of aluminium alloy body and tongue, anodised ,with hard drawn steel spring complete all as specified and directed.

M & L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

M & L for preparation of new or previously untreated steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over pre-primed surfaces complete all as specified and directed.

M & L for preparation of old plastered surfaces of wall and applying two coats of oil distemper emulsion (Ist quality) of approved manufacturer over a coat of primer paint, over and including 1mm thick acrylic wall care putty , after complete removal of existing treatment from walls, complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil distemper emulsion(Ist quality) of approved manufacturer over a coat of priming paint over and including 1mm thick wall care putty complete all as specified and directed

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash,complete all as specified and directed.

M & L for preparation of old plastered surfaces of ceiling, soffits of slab, chajja and applying two coats of white wash,complete all as specified and directed.

S&F decorative type brackets with ends/stops etc including other accessories for fixing arrangements of 25 mm dia curtain rod to wall ,complete all as specified and as directed.

S&F ' in repair' 25 mm dia curtain rod mild steel chromium plated decorative type complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.

Taking down old roof treatment materials from surface of old concrete roof by picking, sweeping clean and washing down with water using wire brush brooming down and applying the following treatment all as directed in order of precedence as stated :- (i) Rendering 15mm thick in CM (1:4) on existing roof surface true to level. ii) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm. (iii) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.60 Kgs per Sqm reinforced with non-woven polyester fabric/matt weighing not less than 160gms per Sqm having softening point not less than 150 mm centigrade, having tensile strength of 650 N/5cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinfocred tearing strength of 180 N by torch application . Polymeric membrane shall be taken to a height of 30cm(minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (iv) Applying protective coating of Heat resistant paint in two coats over APP membrane. Note :- (i) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. iii) APP based polymeric membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given in IS 16540-2017/IS 16532-2017.

Item No 72 Contd..... (iv) Contractor shall produce necessary test certificate of the manufacturer to the Engr-in-Chage before incorporation in the work. (vi) Necessary independent tests shall also be carried out by the Contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work (vii) The work shall be executed through authorised applicators of original manufacturer only

M & L for PCC ( 1:5:10 ), type E-2 (using 40 mm graded crushed stone aggregate) as in sunken portion , filling and mass concrete etc, complete all as specified and as directed

M & L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces of sunken portion, finished even and smooth (without using extra lime or cement) mixed with water proofing compound as per manufacturer’s instructions complete all as specified and directed. (Note : WPC will be measured & paid separately).

Applying evenly two coats of hot blown bitumen at the rate of 1.50 kg per square metre (each coat) on concrete or plastered surfaces, complete all as specified and directed.

Polythene film, 50 micron thick, laid over bitumen primer, complete all as specified and directed.

S & F 25mm dia HDPE pipes of pressure rating 6 kgf/cm2 fixed to floor/walls or laid in trenches etc, complete all as specified and directed.

S & F 40mm dia HDPE pipes of pressure rating 6 kgf/cm2 fixed to floor/walls or laid in trenches including fittings/fixtures i.e, elbow, unions, adoptorsw, socket, wall clips if required etc, complete all as specified and directed.

S & F Polythene film,150 micron thick, complete all as specified and directed.

Dismantling of water tanks from roof /stagging etc and removing from site etc n exc 250 Ltrs capacity, complete all as specified and directed.

Dismantling of water tanks from roof /stagging etc 3m and removing from site etc exc 250 but n.exc 500 Ltrs capacity,complete all as specified and directed.

S & F 500 litres capacity rotational moulded polyethylene (HDPE) water storage tanks (Cylindrical vertical with closed top), ISI Marked, with IS 12701-1989 having triple layers wall construction with manhole threaded lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes,hoisted and fixed in position complete all as specified and directed.

S & F 250 litres capacity rotational moulded polyethylene (HDPE) water storage tanks (Cylindrical vertical with closed top), ISI Marked, with IS 12701-1989 having triple layers wall construction with manhole threaded lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes,hoisted and fixed in position complete all as specified and directed.

S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm- 42gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F ' in repair' 20mm bore dia gun-metal, Globe or gate valves with iron wheel head screwed both ends for iron pipes complete all as specified and directed.

S&F GI tubing of 15mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing of 20mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified and directed.

S&F ' in repairs' 15mm bore fancy type chromium plated, concealed stop valves ,cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 'in repair' 15mm bore fancy type chromium plated angle/stop cock , screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 'in repairs ' for 15mm bore , fancy type chromium plated bib tap, cast copper alloy with capstan head long body and cup, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F ' in repairs ' 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.

S & F 'in repair' 32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 'in repair' 2-in-1 brass chromium plated fancy type wall mixer, 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 'in repair' brass chromium plated fancy type centre hole mixer, 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 'in repair' 15mm bore brass chromium plated fancy type sink mixer for mixing hot & cold water with swinging casted spout (wall mounted type), with connecting legs & wall flanges two joints to steel pipe or union and plugging/screwing to wall complete all as specified and directed.

S&F 'in repairs ' for 15mm bore , fancy type chromium plated two way bib tap, cast copper alloy with capstan head and cup, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 20mm dia , brass chormium plated towel rail D type, 60cm long between flanges, fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed.

S&F ' in repair ' CP health faucet along with 1.25m long flexible tube and holding stand incl all necessary fitting complete all as specified and as directed

S&F ' in repair ' 125mm size chromium plated shower roses with arm , with or without swivel joints, any size, including fixing to steel pipe or union, complete, all as specified and as directed.

S & F 'in repairs '10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, including brackets complete all as specified and directed.

S&F ' in repair ' chromium plated brass soap dish , any type , fixed to plugs with chromium plated brass screws, complete all as specified and as directed.

S&F ' in repair ' sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S&F ' in repair ' sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm ,incl 40mm dia waste pipe of polythelene of low or high density, 40mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM (1:3) if required, complete all as specified and as directed.

S & F ' in repairs' Vitreous China wash basin, white, flat back, size 550 x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S & F ' in repairs ' vitreous China wash down water closet pan (pedestal pattern), white, ' P ' or 'S ' trap ,including connection to outgoing drain and flushing pipe, anti syphonic pipe with and including water closet seat cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S & F ' in repairs' vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor, complete all as specified and directed.

S&F 32mm dia PVC waste pipe for WHB fixed with one end with socket complete all as specified and directed.

S&F 40mm dia PVC waste pipe for kitchen sink/urinal fixed with one end with socket complete all as specified and directed.

S & F ' in repairs ' Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed

S & F ' in repair ' corner shelf of size 300mm radious (with brass chromium plated brackets) fixed in walls with necessary screws, self and front circle in design fixed over chromium plated brackets of heavy duty with front linings with glass etc complete all as specified and as directed.

S&F stainless steel plate rack of size 610 x 914 x 254mm made out of 1mm thick stainless steel sheet, standard quality, fixed with brass screws complete all as specified and as directed.

S&F 'in repair' 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and as directed.

S&F ' in repairs' 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 'in repair' 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls ,complete all as specified and as directed.

S&F 'in repairs' 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed.

S&F 110mm bore, PVC (SWR) bends of any radius with access door , complete all as specified and as directed.

S&F 75mm bore, PVC (SWR) bends of any radius with access door , complete all as specified and as directed.

S&F 'in repair' 110mm bore, PVC (SWR) junction single, (single T) equal or unequal , complete all as specified and as directed.

S&F Stack clamps for 75mm bore pipes out of 50 mm by 5 mm flat iron and 16mm dia each round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S & F 75mm bore PVC (SWR) vent cowl, complete all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl, complete all as specified and as directed.

E/M PORTION Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down main switch/DBs including MCB's with board and fixture of any description and making good distrubed surface of walls etc complete all as directed.

Taking down the existing unserviceable sub main/service connection wiring of any size and any description including conduits complete all as directed

M&L for point wiring for One light point / one fan point controlled by one, one way switch complete as specified with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through including concealed PVC conduit not less than 20 mm dia with concealed modular box suitable for logic modular switches , sockets , etc and logic modular white plates, sorroundings of suitable size as required at site with PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully as specified complete all as specified and directed for the following:- Note: - (i) Rate quoted shall include for cost of making MS box and concealed in wall including cutting and sinking of boxes and making good to the walls (No extra payment will be made for the same) (ii) Provision of blank plates as per site requirement (No extra payment will be made for the same)

All as per Srl item No.130 here in before but 3 pin 5 Amp socket on independent board complete.

All as per Srl item No.130 herein before butone light point controlled by two Nos, two way switches, complete.

All as per Srl item No.130 here in before but one bell/buzzer point controlled by one push button complete.

All as per Srl item No. 130 here in before but one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 sqmm size, complete.

All as per Srl item No. 130 here in before but wiring with 2.5 sqmm and 2.5 sqmm as continious earth wire for 3/5 pin 6/16 Amps socket outlet switch for the same will be provided near the gate of Kitchen/Toilet, complete.

S & F switch piano flush type, single pole, one way, 5/6 Amp, 230 volts complete all as specified and directed.

S & F switch piano flush type, single pole, two way, 5/6 Amp, 230 volts complete all as specified and directed.

S & F bell push , flush type, 5 Amp single pole , 230 Volts complete all as specified and as directed.

S & F socket outlet 2/3 pin 5 Amps, flush type complete all as specified and directed.

S& F switch socket combination two-in-one (multipurpose) , 6 pin, 5 Amp and 15 Amp, flush type, universal 240 Volts complete all as specified and directed.

S& F switch socket combination two-in-one (multipurpose) , 5 pin, 5/6 Amp, flush type 240 Volts complete all as specified and directed.

S&F ceiling rose, 3 phase, phase/polycarbonate, isolated body,complete all as specified and directed.

S & F buzzer, ding dong type AC, 230 volts, single phase complete all as specified and directed.

M & L for concealed sub main wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits medium grade not less than 20mm dia including 6 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals including taking down of old wiring complete all as specified and directed. Note :- (i) Two single cable for phase and neutral one single core green earth wire including one meter PVC conduit is measured as one unit. (ii) PVC conduit and its accessories is deemed to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

M & L for concealed sub main wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 10 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits medium grade not less than 20mm dia including 10 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals including taking down of old wiring complete all as specified and directed. Note :- (i) Two single cable for phase and neutral one single core green earth wire including one meter PVC conduit is measured as one unit. (ii) PVC conduit and its accessories is deemed to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

S & F copper wound exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete with mounting arrangment as per site requirement and connecting wire up to nearest ceiling rose in flexible PVC pipe complete all as specified and directed.

S & F LED bulkhead light fittings, 10 W , 220V, AC decorative, wall mounting, brushed nickel finish fixture with acrylic with 10 W LED lamp B22 base fittings complete including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5Mtr length complete all as specified and directed.

S & F LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED street light of capacity 30 watt IP 65 complete with LED driver and all accessories alongwith fixing accessories such as GI bracket of suitable size bend at an angle to focus properly on area duly mounted on wall with clamps/nut & bolts/washers etc complete all as specified and directed.

S&F sheet metal enclosures for SPN DBs when MCB to be used for 230 volts, 8 way earth and neutral link, IP 43 protection ,double door , concealed on wall complete all as specified and as directed.

S&F sheet metal enclosures for VTPN DBs , vertical type for 415 volts, 4 way earth & neutral link, IP 54 protection ,double door , concealed on wall complete all as specified and as directed.

S & F MCB SP 6 to 32 Amp , 10 KA breaking capacity, B Curve, 230 Volt etc complete with connection testing and commissioning complete all as specified and as directed.

S & F MCB SPN 40 to 63 Amp with 10KA breaking capacity, B curve, 230 Volt complete all as specified and as directed.

Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion, including disposal of surplus soil to a distance not exceeding 50m , complete all as specified and as directed. [Note : (a) The unit rate includes for protection pipe and earth lead upto 7.5 m. Any variation in length of earth leas and protection pipe beyond 7.5 m shall be measured and paid seperately. (b) Excavation/earthwork is deemed to be included in the quoted rate.]

Supply and laying 40mm bore GI Pipe (light grade) with all fittings laid in trenches complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable( heavy duty ) stranded aluminium conductor 1.1KV volt grade of size 50 sqmm, 3.5 core complete all as specified and directed.

S & F double compression copper/stainless steel gland for fixing armoured cable in panel of size 3.5 core, 50 sqmm to 70 sqmm size complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for lying of cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material(Soils) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

M & L for sand cushioning for under ground cable with locally available sand for protection of cable including spreading and consolidations, complete all as specified and directed. (Note :- Thickness after consolidation be measured for payment)

Supply, laying in trenches burnt bricks old size of 230 x 115 x 75mm sub class B bricks for cable protection complete all as specified and directed.

Sch 'A' Part-II (SCHEDULE OF CREDIT) Note :- Amount of Rs 5,99,710.00 indicated in Tender Documents as Schedule of Credit shall be deducted from the total quoted amount of BOQ.

M/s Gupta Construction

N.K.TRADING COMPANY