Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.4 LAccepted-AOC 303 GHS 88 SECTOR 20 PANCHKULA 134113 HARYANA | PANCHKULA | HARYANA | 134113 | ₹43.4 L Quoted ₹45.1 L | L1 | Accepted-AOC BEING LOWEST |
| 2 | L2₹48.0 LRejected-Finance 44 NEAR DURGA MANDIR TRIPURI TOABA TRIPURI TOWN PATIALA 147004 PB | PATIALA | PUNJAB | 147004 | ₹48.0 L | L2 | Rejected-Finance NOT BEING LOWEST |
| 3 | L3₹48.5 LRejected-Finance H NO 597 SEONA ROAD RANJIT NAGAR PATIALA PB 147001 | PATIALA | PATIALA | PUNJAB | 147001 | ₹48.5 L | L3 | Rejected-Finance NOT BEING LOWEST |
| Sl No | Description | Qty | Unit | Jawandha Enterprises L3 | R D Bansal L1 | Mohinder Pal and Sons L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtr in depth for laying of cables errecting of pole including getting out in any kind of soil complete all as specified and directed. | 1,518 | Cum | 100 ₹1.5 L | 85 ₹1.3 L | 100 ₹1.5 L |
| 2.00 | Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil. | 964 | Cum | 25 ₹24,100 | 20 ₹19,280 | 20 ₹19,280 |
| 3.00 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point. | 554 | Cum | 25 ₹13,850 | 30 ₹16,620 | 20 ₹11,080 |
| 4.00 | Material and labour for river sand, unwashed and screened dry laid in trenches/ducts for bedding and cushioning to cable, including spreading and leveling complete, all as specified.
Note:-(i) Consolidated/punned sand shall be considered for purpose of payment.(ii) Sand shall be same as specified for plastering work. | 546 | Cum | 150 ₹81,900 | 250 ₹1.4 L | 280 ₹1.5 L |
| 5.00 | M&L for burnt clay fly ash bricks of size 250mmx150mmx40mm, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable in trenches for cable protection all as specified and directed by Engineer in Charge. | 45 | 1000 Nos | 3,000 ₹1.4 L | 12,000 ₹5.4 L | 6,500 ₹2.9 L |
| 6.00 | Dismantling of ACSR from overhead lines service feeder or distributor span | 25 | Qtl | 100 ₹2,500 | 100 ₹2,500 | 1,550 ₹38,750 |
| 7.00 | Taking down of existing old wornout disbanded mild steel cross arms Cross arms , bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding , bending cold or hot , drilling holes for bolts, in any shape or size, complete all as specified and directed. | 10 | Qtl | 500 ₹5,000 | 100 ₹1,000 | 1,980 ₹19,800 |
| 8.00 | Supply & Laying jointing, testing and commissioning LT XLPE, PVC insulated, PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium stranded conductor of size 16 sqmm 4 core through pipes, induct, on poles, in trenches etc complete of following sizes | 6,200 | RM | 115 ₹7.1 L | 166 ₹10.3 L | 150 ₹9.3 L |
| 9.00 | All as per item No. 8 here-in before but for cable of size 50 sqmm 3.5 core | 2,000 | RM | 270 ₹5.4 L | 283 ₹5.7 L | 325 ₹6.5 L |
| 10.00 | All as per item No. 8 here-in before but for cable of size 240 sqmm 3.5 core | 800 | RM | 1,050 ₹8.4 L | 1,075 ₹8.6 L | 1,105 ₹8.8 L |
Updated dates
Tender Value
Refer Docs
EMD Value
₹97,000
Closing Date
15 Dec 2025, 6:00 pmClosed
MAJ MOHAMMED AQIL AZEEM
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
SPL REPAIR OF OLD/ DAMAGED LT OH ELECTRIC SUPPLY SYS TO UG CABLING SYS AND ALLIED WORKS AT FASF DHABLAN UNDER GE(N) PATIALA
2025_MES_740140_1
GE (N)/TOKEN-77/2025-2026
Open Tender
Civil Works
180 days
PATIALA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
Yes
GE N PATIALA
₹97,000
Yes
3 Feb 2026
17 Nov 2025
17 Dec 2025
17 Nov 2025
15 Dec 2025
1 Dec 2025
Amount
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtr in depth for laying of cables errecting of pole including getting out in any kind of soil complete all as specified and directed.
Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.
Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.
Material and labour for river sand, unwashed and screened dry laid in trenches/ducts for bedding and cushioning to cable, including spreading and leveling complete, all as specified. Note:-(i) Consolidated/punned sand shall be considered for purpose of payment.(ii) Sand shall be same as specified for plastering work.
M&L for burnt clay fly ash bricks of size 250mmx150mmx40mm, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable in trenches for cable protection all as specified and directed by Engineer in Charge.
Dismantling of ACSR from overhead lines service feeder or distributor span
Taking down of existing old wornout disbanded mild steel cross arms Cross arms , bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding , bending cold or hot , drilling holes for bolts, in any shape or size, complete all as specified and directed.
Supply & Laying jointing, testing and commissioning LT XLPE, PVC insulated, PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium stranded conductor of size 16 sqmm 4 core through pipes, induct, on poles, in trenches etc complete of following sizes
All as per item No. 8 here-in before but for cable of size 50 sqmm 3.5 core
All as per item No. 8 here-in before but for cable of size 240 sqmm 3.5 core
S&F PVC insulated wire copper conductor 3 core 2.5 Sqmm for connection junction box to street light complete and as directed by Engr- in- charge.
Supplying, installing, commissioing and testing of LT switchgear panel board of size 1600mmx2000mmx600mm (min) , IP-55 (outdoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) , having busbar chamber for and including 240 Amps insulated Aluminium bus bars , 4 pole , cubical type, factory made out of 3.15mm thick CRCA sheet structure mounted on Platform (as per Sketch), rigid mild steel angle iron frame of 50mmx50mmx5mm with 750mm long extended legs grouting in PCC platform And plateform bottom area bounded with single brick work & filled with sand from which cables enter into panel bottom, duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front and back openable doors with proper locking arrangements for dust and vermin proof with, 10 watt LED light with holder in panel upper side with ,complete including suitable size cable allay, lugs , cable glands and making connections , wiring with suitable size SC PVC insulated copper conductor cable and proper copper conductor wiring for Neutral CT with every outgoing MCCB, l65mm size lock with keys comprising of the followings and specified hereafter
supplying and fixing 40mm nominal bore Galvanised mild steel pipe /tubing, light grade for protection of earth lead / passing cable complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified (Excavation & Earth work , Mild steel clamps, bolts , nuts and washers shall be measured and paid separately)
M&L for auguring of hole suitable for passing 40mm bore pipe in true horizontal position under road, PCC paths etc., by means of mechanical ring/ auger after doing ultrasound to prevent any damage to existing cables pipe line specified and directed coming in the route not exceeding 1.5 m in depth below existing surface level of road and not excd 30M in length complete all as specified. Note: Pipe shall be measured and paid separately under appropriate items and any dahage to existing cables of anytype shall be made good by the Bidder without any extra cost to department.
S&F FRP pole mounting type junction box factory made of size 300x200x105mm with front openable hinged door , locking arrangements, with 4 Nos aluminium bus bars 40 Amps rating mounted on porcelain insulator, cable glands and lugs consisting DIN type rails for fixing MCB SP 6/10 Amps, 10 kA, suitable for domestic loading -01 no. including mild steel flat iron clamp made out of 40x4mm FI, nuts, bolts and washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.(MCB shall not be measured and paid separately and shall deemed included in the unit rate)
M&L earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate ot less athn 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead wire of 4 mm dia.(7.50 m Long) by means of nuts, bolts and washers, checknuts of GI and protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe medium grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wiremesh, earthing test point etc complete including necessary earth work and excavation in any type of soil , PCC 1:3:6 type C1 earth pit and Precast RCC cover 40 mm thick in plain cement concrete 1:2:4 type B1 duly reinforced with 8mm dia TMT bars @ 150mm c/c with 10mm dia MS round bar as in lifting handles, mild steel angle iron frame for pit cover made out of 40x40x5mm thick duly painted with two coats of ssynthetic enamel paint over a coat of primer , excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate number 03 of SSR Part I
All as per item no 17 above but using GI strip 32x6mm dia as earthing lead.
Supplying, installing, commissioing and testing of LT switchgear panel board ( Kiosk) of size not less than 600mmx600mmx500mm, IP-55 (outdoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) , 100 Amps coloured horizontal tinned Aluminium bus bars , factory made out of 3.15mm thick MS sheet structure mounted on rigid mild steel angle iron frame of 50mmx50mmx6mm with 400mm long extended legs grouting in PCC 1:2:4 type B1 of size 150mmx150mmx250mm , duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front double door and back openable doors with proper locking arrangements for dust and vermin proof ,complete including adjustable thermal and fixed magnetic release MCCB 4 pole, 63 Amps, 415V,36 KA,50 hz -01 No (incoming),suitable size cable allay, lugs , glands and making connections/ wiring with suitable size SC PVC insulated copper conductor cable all as specified.
M&L in repaire Lightning arrester VTR ESE non corrosive type of 15 mtr heigh if ground mounted or 8 mtr heigh in case of building mounted with base plate not less than 300x300x6mm including mounting arrangement and two set of earths having protection radius 107 Sq mtr,lightning impulse current- 200 kA (10/350 Micro sec) , protection level-4 including data reciver box capable to transmit data through i-cloud to any desktop web page or application having 6 digit non re-setable display with IP65 protection,70 sqmm single core copper cable for earth connection and manufacturer should be CPRI approved complete all as specified and directed by Engr-in-charge. Note:Model : ASLA 60, VTR 60
Supplying fixing in repair connecting and testing of energy saving & environment friendly LED street light made out of pressure die cast anodised aluminium with toughened glass cover housing, 70 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal volatge 240V, AC,50 Hz, operating voltage range 120-280V, suitable for ambient environmental condition of station, TDH<10%,, Pf >0.95, lumens >80 lm/W, Ingress protection not less than IP65, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 and making connections with cable complete all as specified and directed. Make Crompton/Bajaj/Phillips Note :- Contractor should submit a digital signed genuine certificate from manufacturer
S&F Flood light of 250 watt 230 V AC outdoor type LED to achieve electrical safety class 1, CRI>70 colour temperature 5700k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal volatge 240V, AC,50 Hz, operating voltage range 120-280V AC,Max input current 1.05A/1.31A suitable for ambient environmental condition of station, THD @ 240V <10%,, Pf >0.95, lumens 120 lm/W made up of pressure die cast aluminium modular housing along with dedicated heat sink. clear toughened glass diffuser and silicon gasket ,epoxy black powder coated finish for better aesthetics with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant and must have protection against over voltage,short circuit, open circuit including 5kV internal and 10kV external surge protection complete with driver and LED complete all as specified and directed. Make:- Crompton/Bajaj/Phillips Note :- Contractor should submit a digital signed genuine certificate from manufacturer
Suppy and fix rigid non-metallic PVC conduit 20 mm dia including of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.
Supplying and fixing in repair automatic operation street light timing switch having lighting control (ON-OFF) through Astronomical Calculation of Sun rise/ sun set by setting date, time and degree of longitude and latitude without separate light sensors and prewired with suitable size of FRLS copper conductor single core cable and all mechanism fitted into panel, outdoor type , pole mounted with FI 25x4mm clamps , nuts, bolts and washers dully painted, connecting and testing factory made , epoxy powder coated, Three Phase street light panel, digital 24 hrs, suitable for 12KW (max) complete with 32 Amps TP Contactor, and 40 Amps MCCB and fixed on pole/ wall/ feeder pillar complete all as specified and directed. Make Polycab,Indoasian,Havells Contactors: BCH/L&T/Schneider MCBs: Hager/Schneider/L&T Circuit wiring: Grandlay/Polycab/Havells
Mohinder Pal and Sons (BID ID -3491864)
Jawandha Enterprises (BID ID -3492548)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.80 MB
BOQ_828769.xls
BOQ • 0.31 MB
TENDERDOCUMENTS.pdf
Tender Documents • 1.89 MB
Download all tender documents and submit your bid