Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹10.0 L
EMD Value
₹19,909
Closing Date
21 Oct 2026, 4:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
DC WORKS
DC Works CSWT BSF Indore
Providing profile sheet cover as additional weather protection over Old ADM block building being used as BWWA complex at CSWT BSF campus Indore.
2026_BSF_929818_1
01/EE/NIT/CSWT-INDORE/2026-27
Open Tender
Civil Works
Works
60 days
CSWT BSF INDORE
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹19,909
10 Oct 2026
10 Oct 2026
22 Oct 2026
10 Oct 2026
21 Oct 2026
10 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes | 1,971.51 | kg | 206.35 | ₹4,06,821.09 |
| 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 786.84 | sqm | 738.65 | ₹5,81,199.37 |
| 3 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) | 26.1 | sqm | 333.35 | ₹8,700.44 |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar | 7.88 | cum | 2,060.2 | ₹16,234.38 |
| 5 | Modified Estimated Cost after using correction factor on DSR 2023 on account of GST @ 0.973 * 1012955.28 = 985605.49 (1012955.28-985605.49)= 27349.79 | 1 | X | -27,349.79 | - |
| 6 | Add Approved Cost Index @ 1 % On DSR 2023 | 9,85,605.49 | X | 0.01 | ₹9,856.05 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.31 MB
BOQ_977102.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .