PROVN OF ADDITIONAL TOILETS NEAR VAJRA MUSEUM UNDER GE (WEST) JRC

Amount

Pre-Fabricated building of size 90 Sqm Fabrication of MS Steel Structure Columns, Purlins and Trusses (ISI MARKED APPOLO/SURYA or equivalent) painted with red oxide and Enamel Paint. With Front Coridoor as per sketch att in CA. The rates will include- Wall Specification: Supply and fixing PUF Insulated continuous sandwich panels for walls of total thickness not less than 40 mm and width 1.0 Mtrs. Made out from continue line method on automatic plant with flashings, channel, Jointing and complete finishing. Roof Specification: Supply and fixing of 0.5 mm PPGI Roof line Profile sheets, fixed with self-screws with provision of eave gutter. With 100% leak proof guarantee.

Surface dressing n exc 15 cm deep getting out in Soft / loose soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil as specified and directed

Add to item No 2 for each additional 1.5m or part thereof in depth beyond the first 1.5 m

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in old size brick in Cement Mortar 1:4 as specified and directed

M& L brick work in cement mortar, using sub class 'B' bricks straight of curved on plan any radius in half brick CM 1:4 , all as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point as specified and directed

M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement.

Hard core of gauge not exceeding 63mm of broken stones, deposited, spread and levelled in layers n.exc 15cm thick, watered and well rammed to a true surface all as specified.

M&L for 75 mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement complete all as specified and as directed.

M & L for 40 mm thick Damp proof course in Cement Concrete 1:2:4 type B 0 in horizontal/vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen @ 1.5 kg/Sqm and blinding with clean dry sand @ 0.05 cum /sqm

M&L cement concrete 1:4:8 type D2, using 40m graded aggregate in foundations, filling mass concrete, all as directed

M&L Non skid Coloured ceramic tiles 7 to 8 mm thick (square or rectangle) area of each tile exce 0.18 SqM but not exceeding 0.38 SqM in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with including screed bed in CM 1:4, 15mm thick for laying floor tiles,haucking old concrete surfaces and applying cement slurry 3.0 kg per Sqm.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

Supply and fixing Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Supply, hoist and fix in position; 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density polythene ball screwed for iron pipe (Min for 20mm – 210 gm) complete all as specified and directed.

S&F 20mm Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed.

S&F 20mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

All as per description of item No 21 above but for 15mm bore tube

Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white, and connection to drain (or outgoing pipe) and connection to flushing pipe, anti-syphonage pipe, (excluding flusing cistern and flush pipe) etc complete all as specified and as directed. Make- Jaquar/Kohler/Hindware or Equivalent.

S&F 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified. Make- Jaquar/Kohler/Hindware or Equivalent.

S & F of brass chromium plated jet/health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.Make- Jaquar/Kohler/Hindware or Equivalent.

Supply and fixing vitreous china bowl urinal, half stall, white complete including providing and fixing plugs, PVC Waste pipe, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, etc all as specified and directed.Make- Jaquar/Kohler/Hindware or Equivalent.

S&F for CP Urinal spreader any colour for fixing with 15 mm dia pipe for urinal all as specified and directed. Make- Jaquar/Kohler/Hindware or Equivalent.

S&F of Countersunk/ Under Counter vitreous china wash hand basin of size 605x410x200 mm and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Make- Jaquar, Catalogue Item Code : FNS-WHT-40701

M&L Granite 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Wash Basin Platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and shade and color to be approved by Engr-in-charge complete all as specified and as directed.

S&F Bib tap fancy type cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete. Make- Jaquar/Kohler/Hindware or Equivalent.

S&F 15mm stop valves/Angle cock , chromium plated fancy type, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions. Make- Jaquar/Kohler/Hindware or Equivalent.

PVC connection fiber, reinforced 45cm long with brass check nut and PVC washers at both ends complete

S&F 75mm dia PVC (SWR) floor trap with CP grating including joining to waste pipe fixed in solvent cement in any position complete all as specified and directed.

S&F for CP Soap dish, any type, fixed to plugs with chromium plated brass screws complete. Make- Jaquar/Kohler/Hindware or Equivalent.

Supply and fixing Side Single Lever pillar tap with swinging spout for Countersunk Wash Basin with 450 mm long braided hoses and fixed all as specified and directed. Make- Jaquar, Catalogue Item Code - FLR-5179B

S&F brass chromium plated towel rail 20 mm dia, 600mm long fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed. Make- Jaquar/Kohler/Hindware or Equivalent.

S&F in frameless Looking mirror (Beveled Edge) 5 mm thick, fixed on stainless steel clips or brackets complete all as directed. Make : Saint Gobain or equivalent.

S & F 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints jointing with adhesive fixed to wall/laid in trenches complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints jointing with adhesive to wall/laid in trenches complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) double bends in any radius complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

PVC (SWR) junction double (double tee) equal or unequal, dia of pipe 110 mm complete all as specified and directed.

PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 75 mm complete all as specified and directed.

PVC (SWR) junction double (double tee) equal or unequal, dia of pipe 75 mm complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

S&F grating 75mm dia with centre hole all as specified and directed by Engr-in-Charge

S/F PVC solid door frame of size 50mmx47mm made out of single side Prelam PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing.

S&F factory made solid panel pvc door shutter both side Prelam 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

Supply and fixing powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified

Material and labour for 3 mm thick sheet glass ordinary quality including solar control film 25 micron reflective type sticked on glass pane as per instructions of manufacturer and glazing fixed with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Supply & Fixing 100mm size butt hinges extruded aluminum alloy with galvanised mild steel hinge plate

S&F Aluminum anodized barrel tower bolt of extruded section of size 150mm

S&F extruded Aluminum alloy handle fabricated of size 150mm

M&L for 150mm dia SGSW drain pipes laid in trenches and jointed as specified complete all as specified and directed

M & L cement concrete bed to drain pipe of 150 mm Internal dia of pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for the complete all as specified and directed.

M&L for pre-cast reinforced cement concete 1:2:4, type B-1 (using 20mm graded stone aggregates) as in cover slab for man holes, soak wells & septik tank and similar articles with plain faces including chamfers, weatherings, throating, etc and setting in cement mortar (1:4) complete all as approved and directed. Note:- Reinforcement shall be measured and separately

Mild steel round bars 8mm dia and over, cut to lenth, bend to shape required, including bending spirally, hooking ends and binding with mild steel wire or securing with clips or welded to MS angles conforming to Fe-410-0 all as directed by Engineer-in-charge

M/L PCC 1:2:4 type B1, using 20 mm graded stone aggregate as in coping etc all as specified and as directed

Cutting into exisiting manholes for connecting new drains, making good topipes and rendering ,cutting out existing benching and forming branch channel, half round or 3/4 section in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required, internal dia of pipe 150mm

M&L sand cushioning to under concrete interlocking paver block including watering & consolidation complete all as specified and directed

M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape & size and color confirming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement & pigment of complete

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

S&F Trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to FE 410-W (Gde E-250) quality.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for preparation of new steel surfaces & applying two coat of synthetic enamel paint over a coat of red oxide.

S&F Point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and stranded copper conductor cable ISI marked drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and pressed steel terminal boxes of thicknes not less than 1.2 mm for mounting fitting like P/T switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of FRLS PVC insulated green in colour 1.50 sqmm size copper conductor cable as earth wire and connected to common earth dolly complete all as specified and directed, are as follows :- (a) One light/one fan/one bell point controlled by one, one way switch.

(c) One socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

(d) One socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board.

All as per item No. 68 hereinbefore but wiring with using cable 2.50 sqmm size copper wire FRLS and earth wire of PVC insulated (Green colour) 2.50 Sqmm size copper wire for one 6 pin socket outlet, 16 Amperes on independent board.

Supply and fixing modular metal flush box 1/2 modular complete all as specified and directed.

Supply and fixing modular metal flush box 3 modular complete all as specified and directed.

Supply and fixing modular metal flush box 4 modular complete all as specified and directed.

Supply and fixing modular metal flush box 6 modular complete all as specified and directed.

Supply and fixing modular metal flush box 8 modular complete all as specified and directed.

Supply and fixing modular white cover plate with frame ,1/2 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame ,3 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame ,4 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame ,6 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame ,8 module complete all as specified and directed.

Supply and fixing modular Dummy plate complete all as specified and directed.

Supply & Fixing of switch modular switch one-way 6 Ampere module size complete all as specified and directed.

supply and fixing recess /ceiling mounting LED light 1x36 watt cool white light of 6500k complete all as specified and directed .

Supply and fixing of socket outlet 5 Ampere, 2 and 3 pins (TOTAL 05 PINS), 2 module AC complete all as specified and directed.

Supply & Fixing of switch modular switch 16 A one-way 16 Ampere module size complete all as specified and directed.

Supply and fixing of modular socket outlet two-in-one, 3/5 pin each module suitable for 5 and 16 Amperes module multi purpose type 2 module, AC complete all as specified and directed.

Supply and Fixing Ceiling rose, surface bakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size, complete ,all as specified.

S & F lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed.

S & F led lamp 9 watt polycarbonate complete all as specified and directed.

Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

S & F MCB SPN, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 12 ways with 200 ampere rated bus bar, 240 volts fixed sunk / flush to the wall with IP-43 and IK-09 protection complete all as specified and directed.

Supply and fixing in replacement of LED tube light fitting for all purpose surface and wall mounted with single side connection polycarbonate LED batten with alumimium housing and integrated electronic driver of capacity 20 W , four feet and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed.

S & F LED 9/10 Watt tube light 2 Feet mirror light fitting complete with all acessories 1x9 Watt LED , with CCT of 6000k suitable for domestic application, 240 Volts, 50 Hz, and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete all as specified and directed.

Supply and fix in replacement of security light fitting LED 35 Watt with dusk and down sensor aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size GI Bracket and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed.

upply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m Complete all specified and directed engr-in-charge

M & L for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed. (i) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt.

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 35 sqmm 2 core with cable gland including taking down old unserviceble cable complete all as specified and directed by Engineer-in-Charge. (For JCO/OR Md Accn)

M & L river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable which is to be punned down to 10m all as specified and directed.only punned thickness will be measured.

Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed.

Supply and fixing /laying galvanised pipe 50 mm bore light grade fixed to pole with clamps nuts, bolts and washers or laid under road crossing or fixed to wall complete all as specified and directed.

M&L for drilling and tapping cast iron water mains for branch connection of internal dia

M&L For for run lead joint including provision of spun yarn for spigot and socketed ci pipes /fitting of size 100MM mm bore completed all as specified

PAUL CONSTRUCTION CO. (BID ID -3348823)

KABEER CONSTRUCTIONS (BID ID -3349589)

G S TRADERS (BID ID -3350552)