Design, Installation and Commissioning of 2 Ton capacity Instrumental elevator (MRL) and Construction of Lift room with electrical arrangements in Forensic Science new building at FSD campus, Mylapore in Chennai city

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 m

21.2) Supplying and fixing of Teak Wood wrought and put up for frames of doors, windows, ventilators, cupboard and any other similar joinery works a) Teak wood over 2.00 metre and below 3 metre length

b) Teak wood below 2.00 metre length

40) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint

112) Supplying and fixing of 300 mm dia sweep AC exhaust fan of approved ISI quality

238) Applying one coat of Anticorrosive treatment on steel reinforcement rods (20 litres of anticorrosive chemical for one metric tonne of steel reinforcement rods)

Annexure 2.15) Supply and filling in foundation and basement with Stone dust in layers of not more than 10cm thick well watered, rammed and consolidated

3.1.3) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly) for foundation using 40 mm gauge hard broken stone jelly

8.2.3.1) Providing and laying in position, Standardised Concrete Mix M-30 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC item a) Foundation and basement

b) In Ground floor

c) In First floor

d) In Second floor

e) In Third floor

f) In Fourth floor

g) In Fifth floor

9.2.2) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand) using Chamber burnt bricks of size 9”x4½"X3” a) In Ground floor

b) In First floor

c) In Second floor

d) In Third floor

e) In Fourth floor

f) In Fifth floor

10.2.2) Brick partition wall in Cement Mortar 1:4 (One of cement and four of crushed stone sand) 114mm thick f) In Fourth floor

18.1) Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

31.5.1) Finishing the top of Terrace floor with one course of solar reflective water proof, heat proof and cool roof ceramic tiles of size 300mmx300mmx8mm thick of approved quality directed by the departmental officers.

33.2.1) Plastering with CM 1:5 (One of cement and five of crushed stone sand) 12mm thick

35.2.1) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand) 10mm thick

43.2.1) Supplying, fabricating and placing in position of mild steel / Ribbed Tor steels for reinforcement for all floors (without cement slurry)

44.6.1) Supplying and fixing of 110mm dia PVC (SWR) pipe for Rain water down fall pipe Type A

64.1.2) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core and 5 amps flush type switch a) Light point with ceiling rose (Coastal area)

68.2.2) Wiring with 1.5 sqmm copper P.V.C. insulated unsheathed single core 5 amps. 5 pin plug socket point at convenient places including circuit mains

70.5.2) Supply and fixing of 4'long 18W crystal Glass LED tube light with ISI mark tube light

77.8.1) Run of main with 2 wires 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

78.2) Plate earthing with copper plate of size 600 X 600 X 3, as per the ISI specification with an earth electrode of 2.1 m

82.3.1) Supplying and fixing of LED street light suitable for fixing following watts LED lamp a) 30W LED street light fitting with LED

98.5.2) Supplying and fixing of Best Indian Teakwood panelled door shutters single leaf in position using 75mm x 37.5mm styles a) Door of size 1000 x 2100mm (single leaf shutter)

161.1.4) Supplying and fixing of 3.5 core 35 Sqmm cable gland suitable for pvc armoured LTUG cable with earth strip around the gland

162.2.1) Supplying and clamping of 3.5 core 35 Sqmm PVC armoured LTUG cable on post or on wall with MS clamps (Above GL)

176.3.1) Supplying and fixing of 8 way single pole and neutral MCB sheet steel enclosure and with 1no 32A DB / MCB type as incoming and 6 nos 6A to 32A SP MCB as outgoing

180) Supply and run of 2 of No.8 tin coated copper with U nails for earth connections

207.3.1) Painting the false ceiling / walls two coats with 1st class ready mixed plastic emulsion paint of best approved quality

207.3.5) Painting the old walls two coats with 1st class ready mixed plastic emulsion paint of approved make including thorough scrapping

207.4.1) Painting the new walls with two coats of Exterior emulsion paint of approved make including thorough scrapping

207.6) Painting the old iron work with two coats of ready mixed first class synthetic enamel paint including thorough scrapping

213.1) Dismantling the damaged brick work in cement mortar without affecting the adjacent structuers in all floors

221) Labour charges for removing the existing window shutter & door shutter including frames, hinges, fastenings etc without affecting the adjacent structure etc. a) Door shutter

b) Window shutter

222) Dismantling the damaged Reinforced cement concrete without affecting the adjacent structures

242.2.2) Dismantling the damaged floor tiles / wall tiles in cement mortar without affecting the adjacent structuers in all floors

255.2) Suppy and fixing 12W LED lamp for bulk head fittings including cost of materials and labour charges for fixing

255.6.1) Suppy and fixing LED 12W bulk head fittings including cost of materials and labour charges for fixing

255.8.5) Supply and fixing of 18W LED 3000K type recessed fitings

359.3.1) Supplying & laying of designer concrete external / internal floor tiles 20 to 23 mm thick, textured anti skid and perfectly crafted of approved make laid overin CM 1:3, 20mmthick including cost of materials and labour charges etc all complete

379.4.4) Supplying and fixing of Sinthetic Grey, Paradise and similar varieties Granite slab of 20 mm thick for flooring

379.8.6) Supplying and fixing of Jet black colour Granite Tiles of 10mm thick for wall cladding

384.1) Supply and fixing of 100A TPN switch with HRC fuses sheet steel double break switch with HRC fuses and neutral on suitable angle iron frame with earth connection

384.2.1) Supplying and fixing of following MCCB with enclosure of approved make ISI a) 125Amps 4pole MCCB

b) 100Amps 4pole MCCB

828) Supplying and laying of hard core 200mm consolidated thickness and laying crushed stone sand 50mm thickness over the metal layer

832.5.2) Supplying and fixing of UPVC (Un-plasticized polyvinyl chloride) Windows of casement type (Open) from the profile the size of outer frame 60mmx58mm

958.4) Design, Supply, delivery, installation, testing and commissioning of Goods lift of capacity 2000kg / 2 Ton with the following specifications: Elevator type; Goods elevator , Number of units; 1.00, speed; 1.0m/s, stop and openings; 4 stops and 5 openings Warrenty: 1 Year

Britto Dhanasekaran

Bidder Name

P MANICKAM AND CO

Britto Dhanasekaran