REPAIR/CLEANING OF SEWAGE SYSTEM BOUNDARY WALL PATH/HARDSTANDING GARBAGE BIN FENCING DRAIN AND ALLIED WORKS IN MD AND OTM ACCN AT ML LINE PP LINE AND MH UNDER AGE B/R-I AT CITY AREA ALWAR

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thick (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L 100mm thick PCC (1:4:8), Type D-2 (using 40mm graded stone aggregate) as in sub base of path/ hard standing complete all as specified & directed.

M&L 60mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS-15658-2006, M-35 Grade and laid over with and including 25 mm thick compacted sand complete all as specified and directed.

M&L 60mm thick machine pressed precast concrete rubberised moulded colourful interlocking paver block with grey cement and pigment any shape and size conforming to IS-15658-2006, M-35 Grade and laid over with and including 25 mm thick compacted sand complete all as specified and directed.

M&L 40mm thick PCC (1:2:4), Type B-1 (using 20mm graded stone aggregate) as in floors complete all as specified & directed.

S&F plastic dividing strips, 1.5mm thick and 38 mm in width, inserted in position confirming to design complete all as specified and directed.

Dismantling kerb stone including cement bedding and removal of debries to a place all as specified and directed.

M&L PCC (1:4:8), Type D2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete.

M&L precast cement concrete solid block factory made as in kerb stone in PCC (1:2:4), Type B-1 (using 20mm graded crushed stone aggregate) set in CM (1:6) complete all as specified and directed.

M&L 75 mm thick PCC(1:3:6), Type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified & directed.

M&L coloured rubberised moulded chequered cement concrete tiles 300mmx300mmx25mm thick, set, jointed and pointed with neat cement slurry as in pavings laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L 25 thick PCC (1:2:4), Type B-1 (using 20mm graded crushed stone aggregate) as in floors complete all as specified and as directed.

M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off premises all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 450mmX 300mmX 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and laid over with and including 10 mm thick rendering in CM (1:4) complete all as specified & directed.

M&L Glazed ceramic tiles in vertical surfaces 300mmx200mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over with and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc. with and including plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified & as directed.

S&F in repairs vitreous china wash basin white of size 550mmx400mm (ISI marked) flat back or angle back type excluding taps, waste chain & plug but incuding new cast iron brackets, CP coupling, waste pipe etc and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs vitreous china squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed

S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) alongwith spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed

S&F in repairs PVC low level flushing cistern 10 ltrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of poly ethylene of low or high density of PVC 32mm dia for LLFC complete all as specified.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key, scrubbing down with water etc all as directed.

M&L rendering 15mm thick in CM (1:4) on brick/stone wall surfaces or other than fair faces of brick work & surfaces, finished even and smooth without using extra cement with water proof compound. Note :- Water proofing compound shall be measured and paid separately here-in-after.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick/stone masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar (1:3) not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed

M&L rendering 5mm thick in CM (1:3) on concrete surfaces in ceiling, soffits and the likes; finished even & smooth without using extra cement complete all as specified.

Preparing newly Plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty of approved make all as specified and directed

Preparing newly pastered surfaces of wall & applying three coats of white wash complete all as specified and directed.

Preparing newly plastered surfaces of walls & applying two coats of cement base paint of approved shade/tint complete all as specified and directed.

Preparing newly pastered surfaces of ceiling & applying three coats of white wash complete all as specified and directed.

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified.

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:6 complete all as specified & as directed.

All as per item No 36.00 above but using old retrieved stone obtained from demolition under item No 32.00.

Extra over stone walling for hammer dressed to face stones and dressing of face beds and joints as specified for random rubble masonry uncoursed or brought to course with maximum depression on face from straight edge held against the depressed surface on lime or sand stone not exc 20mm for rock faced complete all as specified and directed.

M&L PCC (1:2:4), Type B1 (using 20 mm graded crushed stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed.

M&L PCC (1:2:4), Type B1 (using 20mm graded stone aggragate) as in bed blocks, bed plates, coping etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of manhole cover including necessary form work.

M&L PCC (1:2:4), Type B1 (using 20mm graded stone aggragate) set in cement mortar (1:6) as in coping of brock masonry wall kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets etc including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L PCC (1:2:4), Type B0 (using 12.5mm graded stone aggragate) as in 25mm thick (measured solid) louvers and jallies including moulding but excluding frame, set in cement mortar (1:4) complete all as specified and directed.

S&F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed.

S&F in repairs 32mm dia high or low density PVC pipe for low level cistern of length as required at site complete all as specified and directed.

S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and as directed.

S&F in repair 15mm bore fancy type, chromium plated bib tap cast copper alloy with crutch or butter fly handle complete all as specified

S&F in repairs 15mm bore Stop valve/angle valves, fancy type chromium plated cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair chromium plated health faucet for EWC with and including PVC connection 1mtr long suitable for 15mm bore with all connected fittings complete all as specified and as directed.

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame) n.exc. 1.5 Sqm each & removing to store complete all as specified and as directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified & directed

S&F Butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified& directed

S&F 150mm anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F 150mm anodised aluminium handles, cast type complete all as specified & directed

Cleaning of all blockages of Nahani trap/floor trap, bottle trap, gully trap, P or S traps of WCs, 100 mm/75 mm dia CI pipe stacks upto 1st Manhole, CI/SGSW pipe between gully trap & 1st Manhole, CI Tee/Door bends etc to maintain internal sewage system in the area of AGE B/R - I (City Area) with and including manual/pressure cleaning pump & flexible rods and other necessary equipments complete all as specified and directed by Engr-in-Charge. Note : (i) Contractor or his authorised representative collect such type of complaints from B/R-I complaint cell at 8.30 AM on daily basis except sunday /Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaint must be completed within 24 hours without any fail otherwise recovery shall be made double the market rate to the contractor.

Cleaning of Sewage line of 100mm bore from gully traps, grease traps etc. upto 1.5m deep by removing all filth/silt, foreign materials and other deposits whatsoever completely and making the line free from all obstacles and testing the flow of sewer line evenly, smoothly by filling water. The cleaning operation will be carried out in suitable lengths by blocking the first and last manholes of sewage line and removing the silt/sludge & other deposits out side of MD land in covered van/trolley, all as specified & directed.

All as per item No 56.00 above but sewage line of 150mm bore and depth of sewage line upto 1.5m.

Cleaning of septic tank of any capacity or description including cleaning and pumping out fluid, cleaning of sludge from compartment of septic tank including intercepting chamber & washing down with water complete and removing the sludge in covered van/trolley out side the MD land and discharge at designated place by the civic bodies, complete all as directed.

Cleaning of manholes depth upto 1.5 mtr by removing all silt, sludge, any other materials making clean and flushing with water complete incuding removing the sludge in covered van/trolley out side the MD land and discharge at designated place by the civic bodies with and including lifting out slab covers and refixing in same position and cleaning and testing complete all as specified and directed. Note :- Unit rate shall deemed to be included for mechanical means of cleaning wherever required and directed by Engr-in-Charge with NO extra cost to the department and NO representation whatsoever shall be entertained by the department.

All as per item No 59.00 above but depth exceeding 1.5m and not exc 3m deep complete all as specified & directed.

Demolition of reinforcement cement Concrete as in cover/ slabs of manhole/ septic tank/ soakage well of any description and in any position (reinforcement cut as required to facilitte demolition) all as specified and as directed.

M&L precast RCC (1:2:4), Type B1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for manholes, drains etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & directed. Note :- Reinforcement shall be measured and paid separately under relevant item.

S&F 50mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton/Sqm in square, rectangular or circular shape complete all as specified & as directed.

M&L reinforcement TMT bars 6 to 8mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

M&L reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

M&L use and waste of form work to soffits of suspended slabs such as beam, column, roof slab, floor slabs, landings and similar work, n.exc. 200mm thick flat, rough finished surfaces of concrete complete all as specified and as directed.

M&L form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC/PCC bends in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide complete all as specified and as directed.

Demolition and breaking up 150 mm bore drain pipes, salt glazed stone ware/RCC pipes set in cement mortar including PCC haunching and bedding, complete.

M&L 150mm bore reinforced concrete pipe, class NP2, laid and jointed in CM (1:1) complete with collars all as specified & as directed.

M&L PCC (1:4:8), Type D-2, (using 40mm graded crushed stone aggregate) as in bedding to SGSW/NP2 drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore pipe all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and not exc 1.5m deep for foundation or for shafts, walls, manholes etc not exc 10 Sqm on plan and getting out in soft/loose soil.

All as per item No 71.00 above but depth exc 1.5m and not exc 3m.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil.

Removal of excavated soil/material to a distance n.exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point all as specified.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed

S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, fixed to wall complete all as specified & directed

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified & directed

S&F in repair 100mm bore PVC (SWR) bends any radius complete all as specified & directed

S&F in repair 100mm dia mild steel CP grating, with hole for waste pipe of approved make including fixing with cement mortar to floor/nahani traps etc complete all as specified & directed

S&F in repair 100mm bore vent cowl complete all as specified & directed

S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed

S&F in repair PVC (SWR), 110mm junction single, (Single T) equal or unequal complete all as specified & directed

M&L sealing the sides of traps in bath/kitchen using Aqua TS of 'Aquashield water proofing" including cleaning the traps with suitable chemical to remove foreign material complete all as specified and directed.

M&L 300mm bore reinforced concrete pipe, class NP2, laid and jointed in CM (1:1) complete with collars all as specified & as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

S&F mild steel framed work such as grills, gratings, etc using angle iron, flat iron, round bars with end of bars shouldered and or rivetted or forged into spikes, framed guard bars barred into iron doors, walkways railing frame work amd similler work confiming to Fe 290, grade E-165 all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

Dismantling posts or struts (wood, steel or RCC) embedded in concrete, brick work, masonry etc in any position, any section including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavating in post holes (or similar) each n.exc. 0.50 cum, getting out, returning, filling in and well ramming with earth or broken boulders mixed with earth around in layers n.exc 25cm in soft/loose soil complete all as specified and directed.

M&L PCC (1:3:6), Type C2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete for post holes and the likes; complete all as specified and directed.

S&F mild steel joist angle channel or tee sections and fix independently in concrete as fencing posts and similar work confirming to Fe-410 or Fe-310-0 complete all as specified and directed.

Supply only mild steel bolt purpose made with hexagonal or square head one end screwed and headed or both ends screwed to be fitted with washers and one hexagonal or square nuts exceeding 50mm and n.exc 75mm long dia of the sand 16 mm.

Fixing only chain link fencing with and including line wire any mesh size and type of standard rails, straining with round bars of appropriate dia, fixing with bolts and winding wires etc complete all as specified and directed. Note :- Chain link fence of approved mesh, round bars for straining the wooling chain link and nuts/bolts etc shall be measured and paid as 'SUPPLY ONLY' under relevent items of this BOQ.

Supply only MS galvanized chain link fence of approved mesh and diameter of wire complete all as specified and directed.

Supply only MS round bar of 10mm dia and over cut to length bent to shape required including cranking bending hooking ends complete all as specified and directed.

Preparation of new steel surfaces of any description n.exc. 10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (Each line wire to be measured) complete all as specified & directed.

M/S Naglot Enterprises

AARSINFRATECH

shiva construction

Hitesh Construction

KARTIK ENTERPRISES