Supply and installation of furniture for Krushi Bhawan,BBSR

Amount

Providing fitting, fixing and installation of Godrej make Workstation - SYSTEM OFFERED • WISH PANEL THICKNESS· 52.4 MM/ 23 MM HT. -1200 MM APPROX TILE CONFIGURATION FOR PANELS: TOP TILE : FABRIC MAGNETIC & WHITEBOARD (52 MM) FABRIC MAGNETIC (23 MM) INTERMEDIATE BLOCKS -2 NOs DL, BOTTOM TILE : METAL. PRELAM BOARD THK. • 25MM; AT HEIGHT 750MM & OF DIMENSIONS RECTA - 1200 MM WX600 MMD -1 NOS NOVAMETAL PEDESTAL 3DR-2B+lF, SIZE OF 390W X 646H X 585 D METAL KBPT CPUTROLLYcomplete as per approved drawing and specification including cost of all materials ,labour and transportation as per direction of Engineer-in-Charge. (Excluding GST)

Providing fitting, fixing and installation of Godrej Make AERO· Large Seat Depth : SEAT/BACK ASSEMBLY: The seat is made up of 1.2 + 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. * SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D).“ SEAT SIZE(Standard Seat Depth) 47.0 cm. (W) x 49.5 cm. (D). * BACK SIZE : 45.0 cm. (w) x 65.3 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features : • Up-Down adjustment— 8 steps (8 0+0.Scm range) • Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment of 8.0 + 0.5 cm in height. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features.• 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring more comfort.» Tilt tension adjustment.• 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 + 0.3 cn°.Pedestal Assembly : the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. H=The pedestal pitch centerdia is 66.1+0.5 cm. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nyloncomplete as per approved drawing and specification including cost of all materials ,labour and transportation as per direction of Engineer-in-Charge. (Excluding GST)

Providing fitting, fixing and installation of Godrej Make Enterprise 1500 Table with CPU Hanger size shall be 1500 mm Width x 750 mm Depth x 728 mm Height. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) complete as per approved drawing and specification including cost of all materials ,labour and transportation as per direction of Engineer-in-Charge. (Excluding GST).

Providing fitting, fixing and installation of Godrej make Aero Large Seat Depth Revolvfng Chair with Headrest. SEAT/BACK A SSEMBLY: The seat is made up of 1.2 + 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. * SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D). “ SEAT SIZE(Standard Seat Depth) 47.0 cm. (W) x 49.5 cm. (D). * BACK SIZE : 45.0 cm. (w) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features :• Up-Down adjustment— 8 steps (8 0+0.Scm range). • Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment of 8.0 + 0.5 cm in height. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. • 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. » Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 + 0.3 cn°. Pedestal Assembly : the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. H=The pedestal pitch centerdia is 66.1+0.5 cm. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon complete as per approved drawing and specification including cost of all materials ,labour and transportation as per direction of Engineer-in-Charge. (Excluding GST).

N.B - The bidders are required to Quote their rates excluding of Goods & Service Tax (GST). GST as applicable will be paid extra. The existing rule of Govt. and any amendment made in future will be followed.

GRAND FURNITURE

4S INTERIORS