Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.3 Craccepted-aoc | ₹1.3 Cr | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹2.4 L
Closing Date
13 Mar 2026, 10:30 pmClosed
Bangalore Electricity Supply Company Limited
EE CIVIL
Providing Aluminum partition, workstation to CSD-1 office building and other allied works like Pavers, Surface drain, approach road, Vehicle parking stand at BESCOM OEC Colony, Tumkur.
BESCOM/2025-26/OW/WORK_INDENT1010
BESCOM/2025-26/OW/WORK_INDENT1010
Open
Other Works
Two Tender Document System(Two Cover)
BESCOM Chitradurga Area Zone(CTAZ) Office Chitradurga
7 documents required · 7 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The bidder shall upload the work done certificate for having executed ONE similar nature/construction of RCC building work of value not less than 50% of amount put to tender i.e.,Rs. 80.49 lakhs and completed satisfactorily as a prime contractor within stipulated time period in the past 5 years (i.e., 2020-21 to 2024-25). Work done certificate shall be duly signed by the officer not below the rank of Executive Engineer or equivalent.
The annual turnover of the bidder shall not be less than the TWICE the estimated annual payments i.e., Rs.321.96 lakhs per year in any TWO of the previous 5 financial years (i.e., 2019-20 to 2023-24).Turnover certificate issued by Chartered accountant shall be uploaded.
In support of this, the balance sheets and profit loss statements issued by a Chartered Accountant for the any TWO of the previous 5 financial years shall be scanned and uploaded. (i.e. 2020-21 to 2024-25) (Registered Chartered Accountant PIN must be mentioned) For the certificates, UDIN is mandatory.
availability of the credit facility issued by any Indian Nationalized Bank/Scheduled Bank (enjoying credit facility) shall be more or equivalent of the estimated cash flow for three months in peak construction period The credit facility certificate after this notification date (Bankers certificate as per uploaded format) issued by any Nationalized Bank/Scheduled Indian Bank addressed to the Chief Engineer(Ele), CTAZ, BESCOM, Opp. RTO Office, Turuvanur Road, Chitradurga 577 501 shall be scanned and uploaded in original. (Rs.53.66 lakhs)
The bidder shall be a Registered KPWD Civil contractor of Class-III and above. The valid License in original shall be scanned and uploaded.
The bidder shall possess valid GST registration number. The original GST Certificate shall be scanned and uploaded
Bidders who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The bidder shall upload his tender capacity calculation in his letter head along with date and signature with Seal.
₹4,030
₹2.4 L
13 Mar 2026
27 Feb 2026
16 Mar 2026
12 Mar 2026
11 Mar 2026
Providing Aluminum partition, workstation to CSD-1 office building and other allied works like Pavers, Surface drain, approach road, Vehicle parking stand at BESCOM OEC Colony, Tumkur.
Clearing and grubbing road land including uprooting rankvegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable m...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and t...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadi...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, baseme...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ra...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...
Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...
do columns upto plinth (Including formwork charges).
do Plinth Beam (Including formwork charges).
Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ t...
do beams (Including formwork charges).
do slab (Including formwork charges).
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 20 mm cement plaster (external surface) of mix :1:4 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing s...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation o...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, ...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Design,supply & install Conventional Curtainwall Glazing System made out of Al.profile depth, width with panel fixed at top and bottom and with al.caping and pressure plate system in both horizontally...
Providing and intsalling Sky light Glaze & Glass of 12 mm laminated glass:( 6mm Clear toughened glass, 1.52mm PVB, 6mm Clear heat Soaken glass of saint gobaine make complete. Including labour, silica ...
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make co...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make co...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doo...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and ...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.: Polyester powder coated minimum ...
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and ...
Providing and fixing aluminium die cast body tubular type universal hy draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 ...
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (b...
Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module size of 600x600x19mm with Exposed grid for Hospitals, Shopping malls, Commercial establishments and office complexes. The ti...
Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling ...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...
Kerb Stones Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Providing and fixing Veneer panelling, over50mm x35mm sal wooden frame work at spacing not exceeding 600mm c/c fixed to the floor & ceiling, and top covered out of 4mm thick approved quality Veneer, f...
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is...
STRAIGHT WORKSTATIONS (FRAME AND SEPARATOR) Providing and fixing STRAIGHT WORKSTATIONS consisting of BACK TO BACK unit made out of 75 mm thick MS CRCA powder coated, tile based system for main sprin...
CUBICLE WORKSTATIONS : Providing and fixing CUBICLE WORKSTATIONS consisting of wings made out of 75 mm thick MS CRCA powder coated ,tile based system for main and return spine, Top tile finish 8 mm...
b) T Type 2 wings, Size: 1500mmW x 1500mm D x 1200mm ht.
d) L Type 1 wing, Size: 1500mmW x 1500mm D x 1200mm ht.
Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical support finished in approved 1.5mm laminate with 12mm thick ply packing internally finished with enamel ...
FREE STANDING TABLE FOR CABIN - Providing and fixing Free Standing Table for Cabin- with frames consisting of 30 mm thick tabletop in 1.5mm thick approved Laminate finish with reverse waterfall edge...
FREE STANDING TABLE FOR CABIN - Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLY table top , 25 mm thick PLY with edge bomded End table,18 mm thick PL...
FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLPB table top , 25 mm thick PLPB with edge bomded End tabl...
COT WITH BED - VENEER FINISH: Supplying & Fixing Cot of size 900 x 1900 x 450mm comprising of approved timber Ply wood supports, 12mm thick ply base for the bed including necessary framing, head board...
MEETING ROOM TABLE: Dimension: 2100mm x 900mm x 750mm Providing and Fabricating Meeting Room Table with 19mm ply Finished with 4mm thk Approved Veneer Melamine finished. Table top: 40mm thick table to...
DISCUSSION TABLE - METAL LEG
Size: 900mm dia x 750mm Ht (4-Seater)Providing and fixing discussion table metal leg consisting of 25mm thick PLPB table top edge bounded MS CRCA sheet roud plate at botto...
SINGLE SEATER SOFA Providing & fabricating SINGLE SEATER SOFA in silver wood frame work with 150mm thick foam backing for seat & back rest clad with two layers of 12mm thick foam of approved make clad...
THREE SEATER SOFA Providing & fabricating THREE SEATER SOFA in silver wood frame work with 150mm thick foam backing for seat & back rest clad with two layers of 12mm thick foam of approved make clad w...
CENTRE TABLE Providing & fabricating centre table of size 1000mm x 1000mm formed out of 19mm thick commercial ply finished in 1.5mm thick approved laminate with edge lipping with approved edge bindin...
Providing and fixing 450mm W x 450mm D x 685mm Ht Mobile pedestal unit-Wooden with 18mm thick PLPB with edge bonded for body, Two equal drawer and one filing drawer with centralized locking system, Te...
RUNNING COUNTER Providing & fabricating counter made out of 19mm thick Ply with Postformed Edge, 750mm deep. All the exposed edges to be finished with approved edge binding, the counter top shall be s...
OVERHEAD STORAGE (ABOVE PANTRY COUNTER) - 450mm deep x 450mm ht.Providing & fabricating storage formed out of 19mm thick commercial ply for front, sides & back formed out of 12mm thick marine grade pl...
PANTRY COUNTER - GRANITE TOP Fabricating and fixing low height storage cabinet of height 850mm and depth 600mm formed of 19mm marine grade plywood formwork/carcass for front, sides & back formed out o...
Providing and fixing chromium plated brass curtain rod with ISI mark hav ing wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., whereve...
Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge
Providing & fixing Roller blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engine...
Conference table :- Providing and fixing conference table consisting of 25 mm thick play finished with veneer with two coats of melumin polish complete as per the directuions of the Engineer incharge,...
MEDIUM BACK CHAIR - Leatherette with castors Supplying & placing in position Medium back chair with following specification.Seat: Seat to be formed out of bent ply / PVC backing with deformable pre mo...
MEDIUM BACK CHAIR- FABRIC without castors, with collapsible writing desk Supplying & placing in position medium back chair with following specification. Seat: Seat to be formed out of bent ply / PVC b...
Conducting Topographical GIS survey for the proposed Water Supply / UGD scheme to the city / town with latest total station survey equipments. The work shall include collection of field data from lo...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Laying,Lowering and jointing of S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class ,rolling and lowering into trenches, laying true to line and level at both destinations and jointing o...
Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qu...
_do Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. 1.2M depth & SFRC cover & frame
_do Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. 1.0 M depth & SFRC cover & frame
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fix...
Connecting the existing lateral connections to the proposed / existing Sewer Mains, including earth work excavation in all soils, lowering, laying, barricading, dewatering, jointing RCC-NP3 Class pip...
Dewatering the sewage / storm water by using reqired HP submersible pump for the diversion of storm / sewage during the execution of work. Considering for one Pump.
Fabricating, supplying and erecting tubular FLAG POLE of height 9 Mtr having three sections with necessary hooks for flag hoisting and providing two coats of red oxide paint and finished with two co...
Supplying and fixing of PVC casing and capping on the wall or ceilling using necessary materials like bends,junction box , elbows,screws at an interval of 300mm etc as required. 20mm size-
Supplying and fixing of PVC casing and capping on the wall or ceilling using necessary materials like bends,junction box , elbows,screws at an interval of 300mm etc as required. 25mm size-
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293. 6Amps one way Switch.
Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293.- 6Amps 3way socket.
Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293.- RJ 45/I.O outlet cat -6.
Supplying and drawing UTP-CAT 6E LAN cable. -
Wiring for lighting /Power Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 6...
Wiring for lighting /Power Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 6...
Supplying of recess mounting non integral type ........ LEDw luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, Power LED swith CCT 6500 degr...
Supply of round/square recess/surface mounted rolling type LEDDown light with ......WGU10 LED Lamp Rib Fabricated from diecast aluminium with white powder coatedprewired to mains connector & has swive...
UPS & BATTERY:-Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Exclud...
Supplying, installation, testing & commissioning of 12V DC, 100AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.-100 AH capacity.
Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring co...
Supplying, installation, testing & commissioning of 12V DC, 150AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.-150AH capacity.
Street light Pole :- Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.- Single Arm Bracket with 10...
Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with In...
Foundation work for 6 meter street light pole .
Earthing of Street light Pole:- Supply ,Installation of 25m GI heavy duty pipe 1.5 meter length for grounding earth with 8 SWG Copper wire 2.5meter length for connecting the street light pole and ...
DATA WORKS :- Supplying & Fixing of switch mounting rack with power manager & cable manager. 6U with 450 mm depth .
DATA WORKS :- Supplying & Fixing of switch mounting rack with power manager & cable manager. 4U with 450 mm depth
Supplying & Fixing of Power strip
Supplying of shelf
Supplying fixing of Network Switches - 48port 10/100 switch.
Supplying fixing of Network Switches - 24port 10/100 switch.
Supplying and Fixing of Patch panel for LAN cabling 48 port 10/100 patch panel.
Supplying and Fixing of Patch panel for LAN cabling 48 port 10/100 patch panel.
Supplying and Fixing of I/O socket with back box single I/O.
Supplying and Fixing of 2mtrs Cat6 Patch cable
Ahuja SSA-250DP Amplifier .
Ahuja16 external mixer .
Ahuja GMB-6C Gooseneck Microphone AND GM-615PA .
Speaker Ceiling 6.5 Inch (8 Ohm), White 30 W .
Speaker Cable [FINOLEX]1.5 sq mm 2 Core .
Microphone Cable .
Supply and installation of WXGA Projector (BenQ MW560C WXGA )1200x800,HDMI, (with above spec) the rate shall include all necessary accessories., connectivity HDMI,IR,USB, Display resolution with warr...
Projector Motorized Screen 8ft width x 6ft ht with all installation, materials, labour complete. .
Projector Ceiling KIT .
Projector HDMI Cable.
Projector HDMI Extender And accessories .
Projector Audio cable [Projector to Amplifier] .
Supplying of four bucket stand alongwith buckets. Complete
Supplying of Hand gloves. Complete
Supplying of first aid box. Complete.
Supplying of SAFETY MASK. Complete.
Supplying of FIRST AID CHART with lamination. Complete.
Providing 4.5Kg C02 Wheel Type Supply and installation of 4.5Kg C02 gas valve type Fire Extinugisher, Tro lleyMounted, EasyWeightManagement used UnusedMechanism, Gross Weight 19.1 Kg. empty Weight 14....
Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick.complete including cost of materials, labour, usage charges of machinery complete as per specifications.
Providing and fixing Naming board for office with ACP back drop of (3mm thickness), with acrylic letters of 3mm thick, M S frame work for back drop, including LED lighting with warrantty of 1years, ...
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
LANDSCAPING WORKS KSRRB M-300-1. Spreading of sludge farm yard maure or and good earth in required thickness(cost of sludge, farm yard manure and good earth to be paid separately) complete as per spec...
KSRRB M300-2.2. Grassing with Doobs grass including watering and maintance of the lawn for 30 days or more till the grass forms a thick lawn face free from weeds and fit for moving including supplying...
KSRRB M300-3. Making lawns including ploughing and breaking of clod removal of rubbish, dressing and supplying doobs grass and planting at 15cm apart, including and spreading of farm yard manure at ra...
KSRRB M300-4. Maintance of lawns or turfing(rough grassing) for a period of one year including watering etc complete as per specifications. MORTH Specification
KSRRB M300-11. Supply at site of work well decayed farm yard manure from any available source, approved by the Engineer in charge including screening and stackin complete as per specifications. MORTH ...
KSRRB M300-13. Supplying sludge duly stacked at site/store complete as per specifications. MORTH Specification No.308.2 .
Planting of trees in 0.60m dia holes, 1m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard an...
Conveying the plants to the excavated pits and planting the seedling in the pit tying the seedling to the supporting stake at 3 places. Plant : Plumeria alba .
Providing and fixing in position artificial Pots with following specification: Recyclable natural fiber material reinforced with clay to achieve different finishes like, stone finish, sand finish clay...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
1010 NIT.docx
Instructions to Tenderers • 0.06 MB
1010 TD.docx
Tender Document • 0.14 MB
BC.docx
Others - Bankers certificate • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .