REPAIR / MAINTENANCE OF E/M INSTALLATION AND CONNECTED WORK UNDER GE RD PASHAN

Amount

Surface excavation in hard/dense soil not exceeding 20 CM depth and averaging 15 CM and getting out complete all as specified and directed.

Material and Labour for hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete all as specified and directed.

Supply install testing and commissioning of 22 KV outdoor type Polymer based gang operated air brake switch triple pole, suitable for verticle mounting complete with explusion fuses, GI operating rod of suitable length for operating mechanism worked from ground level complete in both OFF and ON positions, for current rating upto 200 Amps,each pole consist of galvanised steel base HT insulators as per BSS/ISS non ferrous knife and spring loaded contacts, arcing horns of adequate section to brake magenetizing current of the transformers. All ferrous parts hot dipped galvanised and non ferrous parts suitablly tinned to withstand weather complete including taking down existing Unserviceable AB switch all as specified and directed. Make:- Jaipuriya Brothers or Pactil

All as per item No 03 above but current rating upto 400 Amps

Supply and Fix Polymer based dropout fuse unit complete set suitable and including for 22 KV, HT outdoor and dropout type of capacity 200 Amps including jumper connections with copper flexible designed jumper and testing and commissioning complete including taking down existing Unserviceable fuse all as specified and directed

S&F lightining arrester suitable for 18 KV station class including taking down old unserviceable set all as specified and directed by Engineer-in -Charge.

Material and Labour for ACSR conductor (Ferret) jumper connections of following lengths both ends secured with suitable aluminium lugs or one end with AI lugs and other end plain for binding with conductor encased with polythene sleeve, RYB colours of suitable dia complete all as specified and directed for :- a) Not exceeding 0.75 meter length.

b) Exceeding 0.75 meter length but not exceeding 1.5 meter length.

c) Exceeding 1.5 meter length but not exceeding 2.5 meter length.

d) Exceeding 2.5 meter length but not exceeding 3.0 meter length.

Material and labour for special factory made earthing electrode comprising of hot dipped galvaized MS flat inserted in to GI pipe of 88 mm bore (outer), 3meter length, filled with non magnetic anti corrosive material specially developed for ground resistance enhancement power around the electrode to retain moisture conforming to IS 3043 including necessary boring in ground of 150 / 200mm dia in any type of strata connecting to test point all as specified and directed (the earth resistance shall be less than 1 ohms . Contractor shall improve the earthing resistance within the permissible limit without any extra cost complete all as specified and directed. Note : Rate for FRP earth pit cover shall be deemed to be included in quoted rate

Dismantling and Transpporting setting aside to steel poles/struts, any size for credit schedule within 20 metres complete all as specified and directed

Supply and fix HT steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31, 9 metre long including painting wth one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embeded in concrete, painting three black/red bands at lower portion of pole each of 300 mm height at 300 mm spacing, painting pole No with black paint at suitable height complete all as specified and directed by Engr-in-Charge.

Supply and fix HT steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-55, 11 metre long including painting wth one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embeded in concrete, painting three black/red bands at lower portion of pole each of 300 mm height at 300 mm spacing, painting pole No with black paint at suitable height complete all as specified and directed by Engr-in-Charge.

Material and Labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundations of stays and poles etc complete including necessary form work weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

All as per item no 15 above but PCC 1:2:4 type B-1 with 20 mm graded stone aggregate for coping of pole including necessary form work complete all as directed.

Material and Labour for repairing the existing LT feeder pillar boxes by welding the damaged hinges / aligning the doors to fit properly including providing rubber gasket and locking arrangement complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of aluminium paint complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection all as specified and directed by Engr-in-Charge.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection all as specified and directed by Engr-in-Charge.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection all as specified and directed by Engr-in-Charge.

Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection all as specified and directed by Engr-in-Charge.

Supply and fixing 32mm dia x 1.5 metre long GI pipe bracket for mounting of street light fitting on pole including bending the pipe to the required shape, 2 Nos 40mm x 3mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and paint etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing 50mm dia x 1.5 metre long GI pipe bracket for mounting of street light fitting on pole including bending the pipe to the required shape, 2 Nos 40mm x 3mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and paint etc complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs pole junction box sheet moulded compound (SMC) type with hinged door and locking arrangement of size 300mm X 200mm X 105 mm (internal ) comprising one No MCB single pole of capacity 6 Amps 240 volts 'C' curve 10 KAand one No terminal for loop in and loop out suitable for three phase street light system including nuts and bolts and connecting up complete, MS clamp fabricated from 25mm x 3mm MS flat iron complete all as specified and directed.

Wiring circuit/submain wiring alongwith earth wire with 2 x 2.5 sq mm + 1 x2.5 Sq mm earth wire of FRLS PVC insulated copper conductor, single core cable passing through steel tubular pole connecting with street light fitting to junction box complete all as specified and dircted by Engr-in-Charge.

Complete removal of existing treatment including preparation of old painted surfaces by washing, rubbing down and stopping of painted surfaces, painting with one coat of synthetic enamel paint of approved colour on centrifugal pump set of 50 HP to 120 HP capacity including inlet, outlet mains, couplings, sluice valve, non return valve, base plate, pulley with safe gaurd, vacume pipe line, LT panel board and writting the MES / SM number with black paint of suitable size of letters complete all as specified and directed.

All as per item No 26 above but for 10 HP to 40 HP centrifugal pump set.

All as per item 26 above but for up to 7.5 HP centrifugal pump set.

Material and Labour for Earth contunity conductor or main earthing lead fixed to wall on recessed or burried in ground or drawn in conduit/pipe fixed to poles or any other indicated situation for loop earthing as required 32x6 mm size galvanised strip complete all as specified and directed.

Supply and Fix in repair rigid PVC line separator made from high grade PVC material, rigid PVC Spacer, distance betwen phase to phase 300mm, suitable for use with 1100 volts grade 2 conductor feeder complete all as specified and directed

Supply and Fix in repairs rigid PVC line separator made from high grade PVC material, rigid PVC Spacer, distance betwen phase to phase 300mm, suitable for use with 1100 volts grade 4 conductor feeder complete all as specified and directed

Material and Labour for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed.

Dismantling of fencing wire mesh, any type complete all as specified and directed.

Supply and fixing chain link fencing of size 50X50X3.15mm dia weight per sqm not exceeding 4 kg complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Material and Labour for prepration of old painted surfaces of Outdoor/indoor 22 KV VCB Panel of any Size and applying with two coat of synthetic Enamelled Smoke gray paint after removing all dust and rust and paint complete all as specified and directed

Material and Labour for prepration of old painted inner side of VCB for Outdoor/indoor 22 KV VCB Panel of any Size with two coat of synthetic Enamelled Epoxy paint after removing all dust and rust and paint shall confirm to IS 2032 complete all as specified and directed

Dismantling and taking down unserviceable MS channel and angle sections all as directed by Engr-in-Charge.

Material and labour for mild steel cross arms, bracing, supports, clamps and back plates fabricated from structural steel section including nuts, bolts washers, welding, bending cold or hot , drilling holes for bolts in any shape/size as directed including painting with two coats of approved colour over a coat red oxide primer all as specified and directed by Engr-in-Charge

Supply lay, connect, test and commissioning of LT underground cable XLPE insulated, armoured heavy duty electric cable with aluminium multi stranded aluminium conductor heavy duty 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following sizes including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings/walls without cable duct) complete all as specified and directed by the Engr-in-Charge for the following :- Notes : (i) Excavation, sand cushioning, brick will be measured and paid separately (ii) Cost of jointing material e.g. lugs, thimbles, glands, nut bolt and washers shall include in quoted rates. (a) 185Sq mm 3.5 core

Supply lay, connect, test and commissioning of LT underground cable XLPE insulated, armoured heavy duty electric cable with aluminium multi stranded aluminium conductor heavy duty 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following sizes including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings/walls without cable duct) complete all as specified and directed by the Engr-in-Charge for the following :- Notes : (i) Excavation, sand cushioning, brick will be measured and paid separately (ii) Cost of jointing material e.g. lugs, thimbles, glands, nut bolt and washers shall include in quoted rates. (a) 240Sq mm 3.5 core

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for taking out/laying of HT/LT underground cable, pole or stay and getting out in Hard soil.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms spread any type of soil complete all as directed by Engr-in-Charge

Removing excavated surplus soil to a distance not exceeding 50 metre and deposting where directed at a level not exceeding 1.5 metre above the the starting point complete all as specified and directed by Engr-in-Charge

Supply and lay in trenches un-reinforced precast concrete cable cover class LV type I of size 250 x 150 x 40mm for cable protection all as specified and directed by the Engr-in-Charge.

Material and labour for riddled earth filling in trenches to required width at bottom and top of cable cusioning including spreading leveling and consolidation complete all as specified and as directed. Note : Punned thickness shall measured and paid

Supplying and laying synthetic rubber insulated mats 3mm thick for voltage upto 22 KV for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed by Engr-in-Charge

YOGESH ELECTRICALS (BID ID -3132047)

GANGA ENTERPRISES (BID ID -3131989)

Star Electrical (BID ID -3132713)

PAMS ENTERPRISES (BID ID -3132643)

ASHA ASSOCIATES (BID ID -3132090)