GE(S) BTD 09 OF 2024-25 PROVISION OF CERTAIN REVENU AND LBW WORKS UNDER AGE BR II UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

Taking Down Chowkhats or Frame with Shutter ( with out taking out shutter from the frame ) exc 1.50 sqm not exceeding 4.0 sqm each as doors , windows & ventilators etc and removal from site all as specified and directed

Taking Down Chowkhats or Frame with Shutter ( with out taking out shutter from the frame ) not exceeding 1.50 sqm each as doors , windows aaa& ventilators etc and removal from site all as specified and directed

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided

Supply only Integral water proofing Compound

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (b) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.

M&L for PCC 1:5:10 type E-2 as in filling of sunken floors etc

S&F Solid PVc Door Frame of Size 50 mm X 47 mm made out of 5 mm pre laminated colour PVC Sheet reinforced with MS Squaretube , suppling and fixing in opening as per specification & drawing and as directed by engineer-in-charge

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F aluminium anodised 100 mm long butt hinges with galvanised mild steel screws complete

S&F aluminum anodised tower bolts 125 mm long complete

S&F aluminum anodised handles , cast type anodised 125mm long complete

S&F pressed steel frames of size 105x60 mm for doors with one or more rebates incl necessary fixing lugs , hinges , lock strike plate etc ( thickness of sheet shall be 1.25 mm) and making good the wall with plaster in CM 1:6 complete all as specified

M&L PCC 1:3:6 type c-1 using 20mm graded stone aggreegates for filling in bed block of hold fast etc complete all as specified and as directed

S&F 35 mm thick Flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt 300 mm.

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm.

S & F 150 mm mild steel pressed handles, oval type, stove enamelled black.

Aluminium powder coated ventilator including provision of neccessary rubber gasket for fixing glass panes etc complete all as shown in drawing No CEBT/SK-936 sheet 1/1. Note: Glass panes and wiremesh shall be measured and paid seperately under respectively Items of BoQ.

S & F 3 mm thick figured glass, pin head type and glazing with oil putty in ventilator complete.

M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish to a distance exceeding 1 km but not exceeding 2 km.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for marble work (Udaipur green slabs) in one piece 15 to 18 mm thick slab of cills of windows and urinal partition and like in laid over and including M&L for 15 mm thick cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and roundening to the edge of stone slabs on edges etc. all as specified.

S & F in repairs, CP basin mixture single lever type and fixed complete all as specified and directed.

S&F in repairs PVC connection 15 mm bore dia and 600 mm long all as specified and directed

S&F in repairs stop valves, chromium plated angular type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union for 15 mm bore dia of pipe complete all as specified.

S & F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints fixed to steel pipe or union complete all as specified and as directed.

S & F in repairs stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe.

S&F brass chromium plated tubular towel rail 60 cm long all as specified and directed.

S&F in repairs brass chromium plated soap tray 100x100x6 mm soap tray all as specified and directed

S&F in repairs 15 mm bore chromium plated long body with wall flanges fancy type, bib taps, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified .

S&F CP grating Doom 125 mm dia with aste hole all as specified and directed.

Taking Down exsiting 15 mm bore pipr of any description all as specified and directed

Taking Down exsiting 25 mm bore pipe of an description all as specified and directed

M & L for 15 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors

M & L for 25 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors

S&F in repairs white vitreous china wash down water closet pan (pedastal pattern) with and including plastic water closet seat white black , closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device incl flush pipe and fixing bolts ( excluding flushing cistern) etc complete all as specified and directed

S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor and excluding flushing cistern, flush pipe and waste pipe.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flushing pipe 32mm dia 900 mm long complete.

S & F in repairs vitreous china, countertop oval shaped wash hand basin, white, of size 560mm x 450mm , including 32 mm dia brass chromium plated waste coupling and PVC waste pipe including angle iron brackets complete all as directed complete, .

S&F Vitrous china urinal half stall type white ( excluding flushing cistern, flush pipe and waste pipe ) including connections to flushing pipe and out going pipes etc complete all as specified and directed

Dismentalling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall , laid in trenches incl all fittings and accessories

Dismentalling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall , laid in trenches incl all fittings and accessories

S & F 100 mm bore cast iron (spun) soil, waste and vent pipes, ISI marked in any length with or without ears, with cement joints, fixed to walls with and including suitable size clamps / laid in trenches.

S & F 75 mm bore cast iron (spun) soil, waste and vent pipes, ISI marked in any length with or without ears, with cement joints, fixed to walls with and including suitable size clamps / laid in trenches.

S & F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door.

S & F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door.

S&F 75 mm dia CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete (1:2:4) type B-1, complete all as specified.

S & F 100 mm dia cast iron branch pieces, single (equal or un-equal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete.

S & F 75 mm dia cast iron branch pieces, single (equal or un-equal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete.

S&F 100 mm bore CI cowl complete all as specified and directed

M&L for 100 mm dia of CI P trap long with grating incl jointing to waste pipe fixed in cement mortar 1:2:4 type b 1 in repair complete all as specified

Taking down old cement plaster including raking out joints hacking for key scrubbing down with water etc and removing rubbish from the premises to a distance exceeding 1 km but not exceeding 2 km etc complete all as specified

M&L for rendering 15 mm thick in cement mortar (1:6) on internal wall surfaces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified.

M&L for rendering 15 mm thick in cement mortar (1:4) on external wall surfaces of brick work or concrete surfaces even and fair without using extra cement mixed with liquid water proofing material as per manufacturer's instruction complete all as specified.(Liquid water proofing material shall be measured and paid for separately.)

M&L for rendering 10 mm thick in cement mortar in (1:3) finishing the surfaces even and smooth on ceiling complete all as specified.

Dismentalling water tanks of exc 500 ltrs and n exc 1000 ltrs capacity water storage tanks remove from site complete

S&F 1000 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 25 mm bore (minimum weight 210 gram).

S & F Gun metal globe or Gate valve , with iron wheel , screwed both ends for iron pipe or for unions for 20 mm bore dia of pipe.

M&L applying two coat of white wash over new plastered surfaces of wall etc complete all as specified

M&L preparation of newly plastered or unplastered surface and applying three coats of white wash on ceiling

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint of approved tint complete all as specified

complete removal of exsiting treatment and preparation of surface applying two coat of white wash over old plastered surfaces of wall etc complete all as specified

complete removal of exsiting treatment and preparation of old plastered or unplastered surface and applying two coats of cement base paint of approved tint complete all as specified

S & F CP health faucet 15 mm bore including 1 Mtr flexible led complete all as specified and directed.

S & F stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed.

S & F 20 mm thick granite slabs for wash hand basin over 15 mm thick screed bed in CM 1:6 including moulding and nosing of corners/ edges complete all as specified and directed,

Material and Labour for providing precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in cooking plateform/slab including necessary formwork and setting in mortar set in cement mortar (1:4) complete all as specified and as directed.

M/Lfor half brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:4

M&L for TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, hooking ends and binding with and MS wire not less than 0.9 mm dia or securing with clips

Same as item above but 8 mm dia stirrups , spacers and binders complete all as specified and directed.

S&F Udaipur green marble slab 18-20mm thick as in corner shelf of 300mm radius including cutting 30mm groves in wall and jointed & pointed with cement slurry mixed with pigment to match with marble and rounding of edges complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc and getting out in soft/loose soil.

M&L for PCC 1:5:10 type E-2 ,using 40 mm graded stone aggregate as in foundation, filling & mass concrete all as specified.

M&L 75 mm thick PCC (1:4:8) type D-2, using 40 mm graded stone aggregate as in subbase for flooring

M&L Brick work built in CM 1:6 with sub class 'B' bricks,straight or curved on plan exceeding 6m mean radius.

M&L for providing RCC1:11/2:3 using 20 mm graded stone aggregate in for beams,cantilevers,bressumers,lintels.

M&L for providing RCC1:11/2:3 using 20 mm graded stone aggregate in for slab supported on walls.

Formworks to soffits of suspended slabs such as roof slabs,floor slabs,landing and similar work not exceeding 200 mm thick flat fair finished and surface of concrete

Formwork to edges of concrete flats,treads,break in doors,window cills, concrete raillings, openings in concrete walls,floors and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10 cm wide

Formwork to sides and soffits of Roof beams,Gable beams and lintel beams rough finished surface of concrete

S&F 2nd class HW 35 mm thick factory mae panelled shutter with lock rail and panel of 9 mm bwp commercial ply of 12 mm veenered particle board with commercial veneering on both faces.The size of rail and style as per IS-1003 (pt-I)kiln seasoned and chemically pressure treated complete all as specified.

M&L hard core of gauge not exceeding 63 mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface with broken bricks bats

Dismantling water tanks 500 ltr capacity from any position complete all

S&F 500 litres capacity rotational moulded polyethylene in white colour,three layered ,water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position

S&F ball brass valves high pressure with polyethylene float and and fly nut complete,screwed for iron pipe or brass ferrule and fixed for 20 mm dia bore of pipe.

PCC (1:3:6) type C-2 (using 40 mm graded aggregate) 75 mm thick as in plinth protection

M&L returning filling including spreading levelling watering and well rammed in layers n exc 25 cm in soft/loose soil.

M&L removing excavated material exc 250 n exc 500 m and depositing where directed at a level n exc 1.5 m above the starting point.

Concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete type D-2 1:4:8 using 20 mm graded crushed stone aggregates for 150 mm bore pipes.

Salt glazed stoneware (SGSW) Grade A drain pipes 150 mm bore laid and jointed on concrete bed, complete including,testing etc all as specified and shown drawings(concrete bed shall be assured and paid for separately)

S&F Anodised aluminium frame for doors,windows,ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F anodised aluminium window and ventilator shutters,fixed type without sash bar ,aluminium section weighing 0.55 kg/m including neccesary jointing cleats, glazing clips,rubber packing,anodised aluminium snap bedding,screws etc. complete all as specified.

S&F 3 mm sheet glass,ordinary quality and glazing with oil putty in square n exc .5 sqm in each pane.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)300 mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F in repair 15 mm swan neck fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F urinal spreader of PTMT any colour for fixing 15 mm dia pipe,(Minimum weights 60 gms)

S&F vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line ,fixed in repairs.

S&F in repair 15 mm bib taps ,cast copper alloy chromium plated fancy type with crutch or butterfly handle,screwed down screwed for iron pipe or for brass ferrule and fixed.

S&F in repair 15 mm angle stop valves ,fancy type chromium plated cast copper alloy ,screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipe

S&F in repairs PVC connection 15 mm bore dia with PTMT nuts of length 450 mm

S&F 75 mm bore CI cowl complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle 125mm (1 no.) complete all as specified

S&F Vitreous china fixed in repairs premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.

S&F in repairs Plastic water closet seat, black, white or off white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for wall hung EWC complete in all respect all as specified.

Vitreous China valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets suitable for wall hung EWC complete in all respect all as specified.

M&L for prepration of new plastered surface and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth including two coat of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

M&L for complete removal of existing treatment on old plastered surface and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth including two coat of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

Material & Labour for prepration of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

Material & Labour for complete removal of existing treatment on old plastered surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

M&L prepration of old steel Surfaces of any description, over 10cm in width or girth,not otherwise described an applying one coat of synthetic enamel paint complete all as specified

S&F 50 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches or fixed to wall complete all as directed

M & L for Point wiring with multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, GI terminal boxes, modular frame & cover plate (suitable for modular switch/sockets) comprising the following: -

One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

One Socket outlet three pin, 6 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

Note for serial item No 118 to 120: 1. Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. 2. GI boxes shall be fixed flush in position with cement mortar (1:4) complete all as directed.

S&F Switch modular type single pole, one way, 6 Amp, one module complete all as specified and directed.

S&F Socket outlet modular type multipurpose 2/3 pin single pole one way 6 Amp, two module, shutter type complete all as specified and directed.

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 1.2 m, 20watt, 1.2 m 3000/6500K, efficacy not less than 90 lumen/watt, extruded Aluminium/ polycarbonate, PC diffusor and integrated inbuilt driver complete complete complete all as specified and directed.

S&F MCB 6-32 Amp 240V SP 10 KA ‘B’ series complete all as specified and directed.

Supplying and fixing wall mounted LED batten fitting complete with one LED tubelight 1x10 watt, 6500K, 2 ft complete with decorative LED lighting fixture with extruded polycarbonate enviroment frindly, energy efficient complete with all light fittings connection complete all as specified and directed.

Supplying and fixing angle lamp holder polycarbonate type with back plate complete all as specified and directed.

Supplying and fixing LED 7W lamp base B-22 complete all as specified and directed.

S & F Heavy duty plastic ventilation fan od 250mm sweep, 240 volt, having RPM not less than 1200, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including grouting of bolts and making good to distubed wall complete all as specified and directed.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

FAQIR CHAND

Ajay Enterprises

SAPNA BUILDERS

M K Enterprises

BALAJI CONSTRUCTIONS

V K CONTRACTOR

B D BATRA AND SONS