NEW CONSTRUCTION OF PILLAIYAR SANNATHI GARBHAGRAHAM WITH BRICK MASONRY

Earth work excavation in hard stiff clayee soils for foundation with initial lead of 10M and initial lift of 2M as per SS20B including all labour charges etc ., complete as per standard specification.

Supply and filling with river sand in layers including all labour charges for filling compacting watering and consoildation etc., complete as per standard specification.

Cement concrete 1:5:10 mix using 40mm size stone jelly including cost and conveyance of all materials and all labour charges including cement which will be purchased by the contractor in his own cost as per ISI and good quality etc., complete in foundation and basement.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Random Rubble masonry work in CM 1:5 ( One of cement and five of sand) Using selected stones and bond stones in foundation and basement including dewatering wherever necessary proper setting, curing etc., complete in all respects complying with relevant standard Specifications.

Supply of cut stone for carrying out Garpaharaham, ArthaMandapam, MahaMandapam Uthiram(Beam), pavukkal and Nilaikal (Door Frame) and other Temple structure including cost and conveyance of all materials to siteetc.,complete as per standard specification. (Cut stone stone block of size upto 5 feet to 10 feet )

Nilakal