9-2(6)/2024-25-Engg.(HRDC)

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work by using cutter machine as per reuirement of site including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineerin-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Dismantling stone slab /tile flooring and wall tiles upto brick work laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

Upto 100 mm dia pipe

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

15 mm to 40 mm nominal bore

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing, wall paneling with fram, cupboard, wooden flooring and any type false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Dismantling of central AC plant duct with grills, all size pipe from ceiling/ wall including disposal of unserviceable material and stacking of serviceable material in CSIR-HRDC store. All cutted pipes in any size will be closed by cement concrete and duct end face will be cover with minimum 6mm thick ply all complete as per direction of Engineer-in-charge.

Dismantling of Godraj make jointed table in rectangular shape average each table size 1400x600 mm and total length of conferance table is 18 mtrs. from the hall and the conferance table stack on 2nd floor, after completion of work, same table will be re-installed in the hall all complete as per direction of EIC.

Dismantling of complete AHU average room size 4.70 L X3.2Wx2.70 H mtrs including all inlet & out pipes, eletrical cables & wires, wall accostic with MS fram and close the all any size pipe opening with cement concrete etc. including stacking of all materials in the campus and disposal of unserviceable materials within 50 metres lead.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to any level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for

Suspended floors, roofs, landings, balconies, lintel and access platform

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :

With F.P.S.(non modular) bricks

Half brick masonry with common burnt clay F.P.S. (non modular) bricks f class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Providing and fixing 16-18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby red or any colour

Area of slab over 0.50 sqm

Providing edge moulding upto 40 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite work

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia, jointing double stone and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Extra for providing holes in granite for taps and wash basin wast pipe of required size and other similar location work etc. including rubbing and polishing of cut edges etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours and shades of size 600x1200 mm as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm / approved chemical, including pointing in white cement mixed with pigment of matching shade complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Second class teak wood

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Door chowkhats

Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors including 5mm thick plain glass, both side required size teak wood beading and polishing etc. (overall area of door shutter to be measured)

Rectangular or square

Extra for providing aluminium louvers size not less than 200x400 mm are provided in flush door shutters. (overall area of door shutters to be measured).

Decoretive type door

Providing and fixing of SS finish premium 60 mm Bolt cylider with key and Knob Operatoin Mortise Door Lock with pair of Handle to fit seamlessly with various door types, accommodating thicknesses ranging from 32mm to 40mm including necessary cutting and screws etc. all complete. Make : Dorset / Godrej or equivalent.

Providing and fixing of SS finish cyliderical keyless door lock for wash room with an emergency opening option from outside with pair of round knob Handle to fit seamlessly with various door types, accommodating thicknesses ranging from 32mm to 40mm including necessary cutting and screws etc. all complete. Make : Dorset / Godrej or equivalent.

Providing and fixing of black / Antique / SS finish Dorset DG906 Rim Digital Lock with RFID and Pin Code Access for main door without Handle Cylinder Housing-Zinc, Keys-Brass to fit seamlessly with various door types, accommodating thicknesses ranging from 32mm to 60mm including necessary cutting, screws, complete fittings demo etc. all complete as per direction of EIC. Make : Dorset / Godrej or equivalent.

Providing and fixing D type Pull Door Handles 12 inch long, not less than 22mm dia SS 304 finished with required screws etc. complete. Make : Dorset / Godrej or equivalent.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Make : Dorset / Godrej or equivalent.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Make : Dorset / Godrej or equivalent.

Providing and fixing in wall / ceiling lining flat 8mm thick HDHMR Board to steel frame / wall with hard wood plugs , backing or studding with necessary screws/nuts & bolts, nails and make the wall lining in plumb etc. complete (Steel frames to be paid separately).

Providing & Fixing wall & ceiling cladding with decorative seamless, waterproof, borer proof,termite resistent, interior grade fluted charcoal louvers average size 1ft x 9.5 ft or sheets (average size 2ft x8ft), average 6mm thick or as per maunfactuer's in required designe, pattern in gloss / matt/ suede finish fix with suitable adhesive (Fevicol Pro Bond) / nail bonding etc. on the existing surface complete as per manufacturer's recommendation. Make : E-3 vegas/ Ero pratik/ Ventura/Phoenix or equivalent.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality as per direction of Engineer-in-Charge. Make: Marino / Century / ERO/Royal touch / Greenlam

1.5 mm thick

1.0 mm thick

Making groove of size approx. 4mmx3mm in laminated HDHMR board / ply (fixed on wall / ceiling / panelling) by router/ cutting machine at required distance as per designed approved including making cutted edge smooth and application of approved colour of French sprit polishing or paint in groove, before applying polish work masking tape should be used both sides to protect the laminate. The rate is including all required materials for polishing / painting work etc. all complete as per direction of EIC.

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding including making required size grooves at required distance as per approved designe / pattern with necessary screws, including priming coat on unexposed surface with : Make: Marino / Century / ERO/Royal touch / Greenlam or equivalent.

Decorative veneer facings of approved manufacture

Providing and fixing 2nd class teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface.

12 mm thick

Providing and fixing frame work for partitions/ wall lining etc. made of required size hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with minimum spacing @ 600 mm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards, frame fixing hook with required dia hole etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge.

Providing, making and fixing of following thickness exterior grade HDHMR board of approved brand, plain with necessary screws etc. of approved brand in cupboard, shutter, units, partitions, boxes, shelves, draws, racks and kitchen cabinet under & upper kitchen counter and skirting etc. including required size 2mm thick PVC edge banding tap all complete as per direction of Engineer-in-charge. (Payment of providing and fixing laminate, auto closing hinges and other fittings shall be paid separately). Make: Action Tesa/ Century or equivalent.

(a) 18 mm thick

(b) 6 mm thick

Extra for joining of two no. 18mm thick board for making of thickness 36mm and fixing of 36mm wide 2mm thick PVC edge rounded binding tape in approved quality, over and above corresponding basic item, in cupboard, units, tops, partitions, boxes, shelves, draws, racks and kitchen cabinet etc with adhesive all complete as required.

Providing and fixing Antique / stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.

Providing and fixing Antique finished brass tower bolts (barrel type) with necessary screws etc. complete :

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. Make : Hattich / Godrej / Kaff

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 300 mm long with screws etc. complete as per directions of Engineer- in-charge. Make : Hattich / Godrej / Kaff

Providing and fixing bright finished brass cupboard or wardrobe locks with four levers of approved quality including necessary screws etc. complete. Make : Dorset / Godrej or equivalent .

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

Triple strip vertical type

Providing , fixing and jali cutting in 12mm thick HDHMR board including cutting of decorative jali by Laser / CNC machine, painting with PU paint by gun machine including required putty etc. and fixing with necessary required adhesive and screws etc. complete as per direction of Engineer-in-Charge.

Providing and fixing of 4mm thick translucent white / coloured mirror effects acrylic plastic sheet fixed with WPC jali and granite/ board included cutting as per required size and fixing with adhesive and nails etc. complate as per directed- by Engineer -in- Charge

Providing and fixing of factory made approved designe Book match panel size 8'-0"x8'-0" on wall, madeup with 12 mm thick HDHMR board including grooving by CNC machine, inlay work with acrelyc glass (as per approved pattern) and Deco painting work done in factory (as approved colour) and also fixing with necessary required adhesive spray Fevitite rapid clear or advise by the manufacturer's etc. all complete as per direction of Engineer-in-Charge.

Providing and fixing stainless steel louver in golden or any approved colour of minimum size 4.5" x 8'-0" fixing with necessary required adhesive / silicne or nails etc. all complete as per direction of Engineer-in-Charge.

Providing and fixing aluminium 12mm wide golden / copper colour Tee in laminated HDHMR board / ply (fixed on wall / ceiling) including cutting as required size by router/ cutting machine at required distance as per designed approved, before fixing of Tee work masking tape should be used both sides to protect the laminate etc. all complete as per direction of EIC.

Providing and fixing of heavy density average 20mm Artifical Grass on vertical wall for making of pattern and designe all complete as per direction of Engineer-in-Charge.

Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)

Providing and fixing factory made uPVC laminated finish in solid colour sliding glazed window comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles with TPE gaskets & duly reinforced minimum with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gaskets in beading and all otherTPE gaskets in main sections, wool pile, zinc alloy (same finish powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (same finish powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes,wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Two track three / two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm.) Make : Fenesta / Aluplast / AIS /VEKA / Duro plast.

Providing and laying Vitrified tiles in floor & skirting in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Make : Kajaria / Somany / Orient Bell/ Jonson

Glazed vitrified floor tiles polished finish of size

Size of Tile 600 x 1200 mm

Glazed Vitrified tiles Matt/Antiskid finish of size

Size of Tile 600 x 600 mm

Providing and fixing 10 mm thick laminated wooden flooring HDF AC 4 grade including required skirting & door profile (planks size as per manufacturer) on the existing flooring with underlayment of LD poly-ethyene sheet and 4mm thick EPE foam sheet jointing with tap all complete as per drawing and direction of Engineer- in-Charge. Make : Action Tesa, Pergo, Greenply, Royal Touch and Shaw floor.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) : Make : Gyproc -St. Gobin / USG Boral / Gypsum

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6). Make : Armstrong / Hunter douglas or equivalent

12 mm cement plaster of mix :

1:6 (1 cement: 6 fine sand)

Applying priming coat with primer of approved brand & manufacturers having low VOC (Volatile Organic Coumpound) content:

With water thinnable cement primer on wall surface havinf VOC contents less 50 grams/litr.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour

Two coats

Painting with synthetic enamel paint with Spray machine of approved brand and manufacture of required colour to give an even shade :

Two or more coats on new work an under coat of suitable primer , putty and shade with ordinary paint of approved brand and manufacturers.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

French spirit polishing :

Two or more coats on new works including a coat ofwood filler etc.

Providing and Fixing 1mm thick 3D washable wall paper of approved make & design complete as per direction of the Engineer In-charge.

Providing & Fixing double roller Zebra blind : fabraic cassette with metal chain of approved quality, colour & shades including rod, chain, pulley, brackets, screws etc. all complete as directed by the engineer-in-charge. Make : MAC / Vista / or equivalent.

Providing and fixing stainless steel (S.S. - 304) words of CSIR - HRDC of approved design & finsih complete in all respect as directed by the Engineer In-charge.

Providing and fixing stainless steel (S.S. - 304) logo of CSIR of approved design & finsih. Complete in all respect as directed by the Engineer In-charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, waste jali including painting of fittings and brackets, cutting and making good the walls wherever required : Make: Ruhe / Jindal/ Nirali / Neelkanth / Cera / Parryware.

Kitchen sink without drain board

Ractangular 610x460 mm bowl depth 200 mm

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia. Make: Jaquar / Kohler or equivalent.

Providing and fixing thin rim table top rectangular edge round average size 495x395x150 mm Vitreous china white wash basin including 32 mm C.P. brass long click clack (POP) of waste coupling full thread with 80mm height of standard pattern as approved complete in all respect as directed by the Engineer-in-Charge. Make: Jaquar (JDS-WHT-25909) ALD-CHR-724 L-130 / Kohler / Hans Grohe

Providing and fixing Pillar Cock with 200mm Extension Body for table top wash basin as approved complete in all respect as directed by the Engineer-in-Charge. Make: Jaquar (OPP-CHR-15021PM) / Kohler / Hansgrohe

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe

32 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with metal moulded frame of approved make and shade with 6 mm thick hard board backing :

Circular shape 600 mm dia

Rectangular shape 1500x450 mm

Providing and fixing toilet paper holder : Make: Jaquar (ACN-1151-N)/ Kohler / Hansgrohe

C.P. brass

Providing & Fixing C.P. brass Towel Ring square size : 150x100 mm, dia 6mm with round flange inluding PVC plugs, CP brass outer cover as approved all complete as required. Make: Jaquar ( ACN-1121-N)/ Kohler / Hansgrohe

Providing and fixing slim single piece concealed Cistern body average 9 Ltrs. capacity or more (Front or Top Actuation) with installation kit & "S Type" drain pipe connection set for wall hung EWC with fram & mesh including fixing in brick work. Making all fittings & fixtures complete as direction of manufacturer's approved, complete in all respect as per directions of Engineer-in-Charge. Make: Jaquar (JCS-WHT-2400) / Kohler / Hansgrohe

Providing and fixing Dual-flush Control faceplate Polished Chrome finish for EWC including as required complete as approved in all respect as per directions of Engineer-in-Charge. Make: Jaquar (JCP-CHR-152415) / Kohler / Hansgrohe

Providing and fixing white vitreous china extended rimless wall hung EWC with UF soft close slim seat cover, hinge, accessories set with skirted trapway water closet of average size 380x515x360 mm of approved shape including all required kits, connector, fittings, nuts, bolts and gasket etc. complete as approved in all respect as per directions of Engineer-in-Charge. Make: Jaquar (CNS WHT 963UFSM- Fusion)/ Kohler / Hansgrohe

Providing and fixing ABS Chrome finish Health Faucet with flexible tube 1.0 metre long and wall hook as approved by Engineer - in - charge. Make: Jaquar (ALD-CHR-573) /Kohler / Hansgrohe

Providing and fixing following dia soil, waste and vent uPVC SWR pipes, ISI marked, conferming to 13592, Type B under ground or above ground level including jointing with seal ring and adhesive solvent for jointing all complete as per direction of Engineer-in-Charge.Make : Prakash /Supreme/ Ashirvad or equivalent.

[a] uPVC Pipe 110 mm dia pipe

[b] uPVC Pipe 75 mm dia pipe

[c] uPVC Pipe 50 mm dia pipe with all fittings

Providing and fixing following dia soil, waste and vent uPVC SWR fitting, ISI marked, conferming to 14735 under ground or above ground level inccluding jointing with seal ring and adhesive solvent for jointing all complete as per direction of Engineer-in-Charge.Make : Prakash /Supreme/ Ashirvad or equivalent.

[1] uPVC fittings 110 mm dia

(a) Plain Bend

(b) Door Bend

(c ) Plain Tee

(d) Nahani Trap 110x110mm

[2] uPVC fittings 75 mm dia

(a) Plain Bend

(b) Door Bend

(c ) Plain Tee

(d) Nahani Trap 110x75mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & all required fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work- Exposed on wall)

[a] 25 mm nominal outer dia Pipes

[b] 32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & all required fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work, including cutting chases and making good the walls etc.)

[a] 20 mm nominal outer dia Pipes

Providing & Fixing 32 mm nominal bore CPVC gate valve with handle of approved quality all complete.

Providing & Fixing 32 mm nominal bore CPVC water tank connection of approved make and quality all complete as per direction of EIC..

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

[a] 15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : Make: Jaquar (OPP-CHR-15037PM) /Kohler / Hansgrohe

[a] 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved quality conforming to IS:8931.Make: Jaquar /Kohler / Hansgrohe

15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer geyser and cistern of w.c. approved make conforming to IS : 8931. Make: Jaquar (OPP-CHR-15053PM) /Kohler / Hansgrohe

15 mm nominal bore.

Providing and fixing SS grating of approved quality and colour. Make: Chilly or equivalent

Rectangular type with openable circular lid

150 mm nominal size square 100 mm diameter of the inner hinged round grating

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

25 mm nominal bore, 152mm long, weighing not less than 440 gms

Cutting holes up to 30x30 cm in walls including making good the same:

With common burnt clay F.P.S. (non modular) bricks

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

100x100 mm size P type

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :

For pipes 100 to 250 mm diameter

Providing and installation of designer glass film on the door and windows of make 3M / Garvare or equivalent all complete as per direction of Engineer-in-Charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots, handles and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

Upto 5mm depth and 5 mm width

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately)

Replacment of existing EPDM gasket in the existing double glazed hermetically sealed glazing , including opening of window and glass beading and refixing in the same position all complete as required and as per direction of Engineer-in-charge.

Providing and fixing 8mm thick table top glass including cutting of glass in shape and size of each table and chanfering of all edge etc. complete as per direction of Engineer-in-Charge. Measurement will be made as per actual size.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and placing DURO SOFT MATS Eco Non Slip PVC Door Mats for entrance, average size 1200x600 mm, 12 mm Thick in approved colour as required.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Supplying chemical emulsion in sealed containers including delivery as specified.

Chlorpyriphos emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:

With Chlorpyriphos E.C. 20% with 1% concentration

Supply of perforated Stainless Steel 202 grade round 14X14 Inch Planter/Flower Planter/Plant Containers/Indoor including planter is fitted with an anti-skid scratch-resistant rubber bumper to protect the flooring and keeps the planter at its place etc all complete as required.

Supply of perforated Stainless Steel 202 grade round Open Bin Dustbin (8''X13'' 10 Litre) including dustbin is fitted with an anti-skid scratch-resistant rubber bumper to protect the flooring and keeps the bin at its place etc all complete as required.

Providing and fixing following size of resin coated steel magnetic writing smooth white board with aluminium framing and magnetic - frendly & dry wipe including wall hanging clips, six magnets in varriable size, one magnetic duster and two magnetic marker with each board all complete as required and as per direction of EIC. Make : Whitemark/ Pragati / 4 thought

(a) Size 600x900 mm

(b) Size 900x1200 mm

Providing and Placing in position Side Table for Godrej Maestro Executive Table. The joining table Overall size: Overall Size: 1200mm (W) x 1050mm (D) x 750 (H). The top panel shall be 25 mm thick with MFC (Melamine Faced Chipboard). The leg of the joining table shall be of metal. Polyurethane Coated joining table incuding all required jointing items / materials for joining existing table all complete as per direction of EIC. Certifications: The company should be ISO-9001:2015, ISO 14001:2015, ISO 45001:2018, BIFMA and AIOTA certified.

Providing and placing of High Back Revolving Chair of Godrej make La Sede Model or equivalent specification manufacturer like Heramn Miller/Steel Case/HNI/Haworth in approved colour. Overall Size: 761mm (W) x 761mm (D) x 1140mm-1350mm (H) x 445mm-545mm (SH). Seat: The cushioned seat shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foam of Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression, Seat size: 476mm W x 492mm D. Back: The back shall be cushioned and made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size: 475mm W x 770mm D. Armrest: The armrest top shall be moulded from polyurethane, upholstered with pure leather and mounted on ot a drop lift adjustable type tubular armrest support made up of MS ERW tube having chrome plated finish. The armrest height adjustable shall be upto 65mm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing shall be made up of HPDC aluminium black powder coated. Seat Depth Adjustment: Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 60mm. Adjustable Back Support: Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 74mm for the comfortable back support to suit individual need. Height Adjusment: The pneumatic height adjustment shall have an adjustment stroke of 100mm. Pedestal: The pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. The pedestal shall be 650mm pitch centre dia. Twin Wheel Castors: 5 nos. twin wheel castors shall be injection moulded in plastic having 60mm wheel diameter and assembled to pedestal. The product should be certified with Greenguard(UL), Indoor Advantage Gold, Green Pro, BIFMA Level 2, GRIHA V2019 and the company should be ISO-9001:2015, ISO 14001:2015, ISO 45001:2018, BIFMA and AIOTA certified.

Providing and placing of Mid Back Revolving Chair of Godrej make La Sede Model or equivalent specification manufacturer like Heramn Miller/Steel Case/HNI/Haworth in approved colour. Overall Size: 761mm (W) x 761mm (D) x 965mm-1140mm (H) x 445mm-545mm (SH). Seat: The cushioned seat shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foam of Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression, Seat size: 476mm W x 492mm D. Back: The back shall be cushioned and made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size: 475mm W x 770mm D. Armrest: The armrest top shall be moulded from polyurethane, upholstered with pure leather and mounted on ot a drop lift adjustable type tubular armrest support made up of MS ERW tube having chrome plated finish. The armrest height adjustable shall be upto 65mm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing shall be made up of HPDC aluminium black powder coated. Seat Depth Adjustment: Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 60mm. Adjustable Back Support: Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 74mm for the comfortable back support to suit individual need. Height Adjusment: The pneumatic height adjustment shall have an adjustment stroke of 100mm. Pedestal: The pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. The pedestal shall be 650mm pitch centre dia. Twin Wheel Castors: 5 nos. twin wheel castors shall be injection moulded in plastic having 60mm wheel diameter and assembled to pedestal. The product should be certified with Greenguard(UL), Indoor Advantage Gold, Green Pro, BIFMA Level 2, GRIHA V2019 and the company should be ISO-9001:2015, ISO 14001:2015, ISO 45001:2018, BIFMA and AIOTA certified.

Providing and Placing in position 3 Seater Sofa of Godrej make PISA Model or equivalent specification manufacturer like Heramn Miller/Steel Case/HNI/Haworth in approved colour. Size of 3 Seater Unit: 2060mm (W) X 905mm (D) X 855mm (H) X 450mm (Seat Height). Seat Foam: The seat is made up of PU foam with an additional top layer of supersoft PU foam, upholstered with fabric or leatherette, Back Foam: The back is made up of PU foam with two additional top layer of supersoft foam, upholstered with fabric or leatherette, Understructure: Understructure is made up of 12mm thick hot pressed plywood [ moisture resistance & Termite proof as per IS: 303] & pinewood of cross sections devoid of major knots & surface defects, 6 nos. per seat & 3.8mm dia. zig-zag spring assembly is mounted over understructure for cushioning purpose, Leg: It is a welded assembly made in Stainless steel tube & plate with plastic endcap. Certifications: The company should be ISO-9001:2015, ISO 14001:2015, ISO 45001:2018, BIFMA and AIOTA certified.

Providing and Placing in position 2 Seater Sofa of Godrej make PISA Model or equivalent specification manufacturer like Heramn Miller/Steel Case/HNI/Haworth in approved colour. Size of 2 Seater Unit: 1460mm (W) X 905mm (D) X 855mm (H) X 450mm (Seat Height). Seat Foam: The seat is made up of PU foam with an additional top layer of supersoft PU foam, upholstered with fabric or leatherette, Back Foam: The back is made up of PU foam with two additional top layer of supersoft foam, upholstered with fabric or leatherette, Understructure: Understructure is made up of 12mm thick hot pressed plywood [ moisture resistance & Termite proof as per IS: 303] & pinewood of cross sections devoid of major knots & surface defects, 6 nos. per seat & 3.8mm dia. zig-zag spring assembly is mounted over understructure for cushioning purpose, Leg: It is a welded assembly made in Stainless steel tube & plate with plastic endcap. Certifications: The company should be ISO-9001:2015, ISO 14001:2015, ISO 45001:2018, BIFMA and AIOTA certified.

Providing and Placing in position 1 Seater Sofa of Godrej make PISA Model or equivalent specification manufacturer like Heramn Miller/Steel Case/HNI/Haworth in approved colour. Size of 1 Seater Unit: 860mm (W) X 905mm (D) X 855mm (H) X 450mm (Seat Height). Seat Foam: The seat is made up of PU foam with an additional top layer of supersoft PU foam, upholstered with fabric or leatherette, Back Foam: The back is made up of PU foam with two additional top layer of supersoft foam, upholstered with fabric or leatherette, Understructure: Understructure is made up of 12mm thick hot pressed plywood [ moisture resistance & Termite proof as per IS: 303] & pinewood of cross sections devoid of major knots & surface defects, 6 nos. per seat & 3.8mm dia. zig-zag spring assembly is mounted over understructure for cushioning purpose, Leg: It is a welded assembly made in Stainless steel tube & plate with plastic endcap. Certifications: The company should be ISO-9001:2015, ISO 14001:2015, ISO 45001:2018, BIFMA and AIOTA certified.

Providing and placing of Center Table of Godrej make SKYLINE GLASS COFFEE TABLE Model or equivalent specification manufacturer like Heramn Miller/Steel Case/HNI/Haworth. The top shall be durable toughened glass with digitally back printed pattern. The Storage shall be dual access open storage. Overall dimensions of table shall be Width- 900mm, Depth- 900mm, Height- 400mm. Certifications: The company should be ISO-9001:2015, ISO 14001:2015, ISO 45001:2018, BIFMA and AIOTA certified.

Providing and placing of Centre Table of Godrej make PISA CENTRE TABLE Model or equivalent specification manufacturer like Heramn Miller/Steel Case/HNI/Haworth. Overall size: 1120mm (W) X 600mm (D) X 349mm (H). The top shall be made of 10mm ± 0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12 ± 0.04 as per IS:1762. Certifications: The company should be ISO-9001:2015, ISO 14001:2015, ISO 45001:2018, BIFMA and AIOTA certified.

Providing and placing of Centre Table of Godrej make PISA CENTRE TABLE Model or equivalent specification manufacturer like Heramn Miller/Steel Case/HNI/Haworth. Overall size: 600mm (W) X 600mm (D) X 349mm (H). The top shall be made of 10mm ± 0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12 ± 0.04 as per IS:1762. Certifications: The company should be ISO-9001:2015, ISO 14001:2015, ISO 45001:2018, BIFMA and AIOTA certified.

Providing and Placing in position 1 Seater Recliners of Godrej make Rhine V3 Model or equivalent specification manufacturer like Heramn Miller/Steel Case/HNI/Haworth in Caramel brown feb leather or in approved colour. Overall size 870mm (W) x 750mm (D) x 980mm (H) with Seat Height of 500mm. The frame is made with the combination of 12mm thick Plywood and pine wood cross sections (without knots). The sofa is provided with webbing S springs of wire diameter 3.8mm. The seat is made up of Slab stock foam with a Density of 28kg/m3 at base and super soft 32 kg /m3 at top. Pocket springs of 2mm dia is embedded in seat. The back is made up of slab stock foam of density 28 kg/m3. The front of the backrest is made of loose conjugated polyester fibre which is filled in the upholstery to make the required cushion. The sofa is provided with a mechanism of Leggett & Platt make. It is made up of mild steel linkages which are riveted together. The reclining mechanism is tested for 158 kg load. The sofa is provied with 4Nos PVC bushes fitted at the bottom surface of reclining mechanism. Soft conjugated polyester fiber filler at armrest and backrest for cushioning effect. The sofa is provided with Magazine pocket for storage which adds to the functionality. Certifications: The company should be ISO-9001:2015, ISO 14001:2015, ISO 45001:2018, BIFMA and AIOTA certified.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

(a) Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

(a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

(b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

(c )2 X 4 sq. mm + 1 X 4 sq. mm earth wire

(e) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

(e) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

15/16 A switch

6 pin 15/16 A socket outlet

Telephone I/O socket outlet

TV antenna socket outlet

Internet I/O socket outlet RJ-45

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

8 Module (125mmX125mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 32 Amp modular type DP switch/Duble pole for AC outlet, connections etc as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

(a) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

(a) Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying of 4C x 50 sq mm Aluminium Conductor Armoured PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade conforming to IS: 7098 ( Part-1) with latest amendments etc complete as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size above 35 sq.mm and upto 95 sq.mm Cclamped with 25x3 mm MS flat clamp) on wall surface as required.

Supplying and making end termination with brass compression gland and aluminium lugs for size 4C X 50 sq.mm (35 mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and fixing suitable size GI box with Aluminium matt finish opnable Pop-Up with cover in front on surface or in recess, including providing and fixing 3 nos. 6 pin 15/16 A modular socket outlet and 2 nos. 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with Aluminium matt finish opnable Pop-Up with cover in front on surface or in recess, including providing and fixing modular 2 nos. telephone jack & one internate RJ-45 socket outlet, connections etc. as required.

Supplying insttalation testing commisioning of following electrical LED fitting with all required accessories and suitable for POP, Ply and Grid Ceiling with the help of hook chain etc. complete as per Engineer incharge requirment. Make : Philips/Havells/Crompton / Wipro.

(a) LED recess mounted Panel white minimum 6500K light 33 watt or above of size 600x600mm, operating voltage 230/250 V, 50Hz.

(b) LED round recess mounted sleek down white minimum 6500K light 18 watt or above, operating voltage 230/250 V, 50Hz.

(c) LED round recess mounted directional COB white minimum 6500K / warm light 12 watt or above, operating voltage 230/250 V, 50Hz.

(d) LED round recess mounted COB Spotlight focused beam with 1" dia cutout, 1 watt or above, warm white light, operating voltage 230/250 V, 50Hz.

(e) LED surface meta Picture light 12 watt or above 500mm long or as per approved.

Supply and Installation of electric Decorative polised Wooden floor lamp light with three wooden shelves with warm 9 watt or above LED bulb and lamp outer will be made by natural Jute and the average size of lamp 40D x 40W x 150H cm all complete as per direction of Engineer-in-Charge.

Supply, Installation, testing and commissioning of LED cove light of 5 meter strip with required driver etc. all complete as per direction of Engineer-in-Charge.

Supply and Installation of Vento Jet 15, 150 mm dia Exhaust Fan, 230 Volt, all complete as per direction of Engineer-in-Charge.Make :Havells/Crompton

S/I/T/C of hand dryer of more than 800 Watt, 50Hz, 230 Volts, stainless steel body with connection all complete as required. Make : Kopal / Jaquar / Euronics

S/I/T/C of 1 HP mini surface water pump single phase with water pressure boosting 24-Liter tank with accessories NRV, 5-way connector, pressure switch, pressured gauge and dry run protection and making all required connections of existing water pipe at terrace level all complete as per direction of EIC. Make : Cromptan / Kirloskar.

Supply, Installation, testing and commissioning of LED Die-cast aluminium powder coated spigot required size housing Post top light, 40 Watt or above, white minimum 6500K, operating voltage 230/250 V, 50Hz including making all required arrangment for fixing of light. Make:Philips/Havells/ Crompton /Wipro

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 60 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

Supply, installation, testing and commissioning of 4-way 2 TR inverter Cassette Type ceiling mounted 3 star or above rating Air conditioner with scroll / rotory compressor having eco firendly refrigerent single phse,230 V ± 10%, 50Hz including Indoor , out door units with decorative grills and coad less remote and machine shall have 100 % copper condensior coil of out door and indoor unit . Also provied powder coated MS stand for outdoor unit and proper comprehensive warranty certificate to be after installation all work completed as per direction of Engineer-in-Charge.(Make should be Daikin/ Hitechi / Carrier ).

S.I.T.C. of 1.5 TR capacity Split type Air conditioners (inverter series) with eco friendly gas, Copper coil, BEE 3 star or above rating with all accessories including MS stand, 3 mtrs standard copper pipe with insulation, electrical 4 core FRLS copper wire and drain pipe etc completed as required. (Make should be Daikin/ Hitechi / Carrier ).

Supply and fixing of Automatic 5 KVA capacity 140-280V Copper Digital Voltage stabilizer for Split Air- Conditioner with TDR of approved brand Blue bird / Sky line / V-gaurd / Microtech all complete as required.

Extra for providing and fixing of refrigerent copper pipping for cassette Type AC & Split Type AC laid between indoor and outdoor units as per site requirement and insulated with class "O" fire retardant sleeve type elastomeric nitrite rubber insulation including S/I/T/C of PVC hard drain pipe with rubber insulation distance between two clamps shall be less then 1 mtr and 3C x 4 sqmm flexible round electrical cable for connection of indoor and out door unit etc complete as required.

Providing and fixing of PVC hard drain pipe etc complete as required.

Supply and fixing of configuring of Matrix EON 510 digital key phone with 32 Keys DSS with Executive secretary feature all complete as required.

Supply and fixing of Beetel M71 Corded Landline Phone or equvalent all complete as required.

S.I.T.C. of Air Purifier cover average 600 sqft area with advanced HEPA H13 filter + Activation carbon filler, 350 degree oscillation, and remove 99.95 % of allergens and pollutants, as small as 0.1 micron, noise level 60dB, 50 Watts, senses, displays PM 2.5, PM 10, Auto mode and remote / hand contol all complete as per direction of EIC . (Make should be Dyson TP07/Honeywell/Phlips/ Carrier ).

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying & laying of following size fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

(a) 2 x 1.5 sqmm

(b) 3 x 1.5 sqmm

Dismantling of underground aluminium wire in steel conduit including stacking of material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling of old flourocent tube light fixtures and fans etc. including stacking of material with in 50 meters lead as directed by Engineer-in-charge.

Desmentling of Fan Coil Unit ( FCU) installed in the each rooms in office building including cutting of the connected pipes average size upto 75 mm and block the pipe with cement concrete , stacking of back buy items and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :

Buy back of following electrical and civil items " As is where is basis":

(a) Old Ceiling fan Size-56"

(b) Old flourocent light fixturs any size

(c ) FCU 1.5 Tone

(d) Aluminium wire

(e ) Plastic exhaust fan any size

(f) Wood any type

(g) MS FCU Jali /DB box/switch & sockets / RCC bars /door locks/handles/ MS windows/ GI Duct/false ceiling grid, channel angle, CI pipes, Panels, all type loha and similar items scraps etc.

(h) Vertical blind channel length more then 1200 mm

(i) Brass basin mixer / bib cock/long boy / angle valve

(j) Aluminium door/ window / fram etc

(k) Flush door any size

(l) Door mortic lock and handles (old)

M/S NADEEM CONSTRUCTION COMPANY (BID ID -872173)

SHREE BALAJI CONSTRUCTIONS (BID ID -872565)