Tender ID

Karnataka

Retender

Works

Buildings

Construction of Anganavadi Building in Hiremallur tq Shiggaon dist haveri

Rural Development and Panchayat Raj Department

RDPR Division Office Haveri | Karnataka

Amount: ₹13.3 LCloses: 20 Nov 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published7 Nov 2025
Closed20 Nov 2025
Retendered7 Nov 2025

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 7 Nov 2025

Tender Value

₹13.3 L

EMD Value

₹33,500

Closing Date

20 Nov 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

Executive Engineer

Office Number

Work Description

Construction of Anganavadi Building in Hiremallur tq Shiggaon dist haveri

Tender Information

Tender ID

RDPR/2025-26/BD/WORK_INDENT20192

Reference Number

RDPR/2025-26/BD/WORK_INDENT20192

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Haveri

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredPWD Registration Certificate Class-3 & above

RequiredPAN & GST Certificate

RequiredWorkdone Certifiate Satisfactorily completed as a prime contractor, at least one similar nature of work such as Building work of value not less than Rs.6.66 Lakhs in any one year.-usually not less than 50 Percentage of the estimated value of contract 2020-21 to 2024-25. Work done certificates issued by the officer not below the rank of Executive Engineer. Work done certificate with work indent number is mandatory.

RequiredTo qualify for award of the Contract, each bidder should have attained in the last five years i.e. 2020-21 to 2024-25 achieved in at least two financial years a minimum financial turnover-Turnover certificate with Profit and loss statements and IT returns-in all classes of civil engineering construction works only Rs. 13.32 Lakhs turnover shall not be less than two times of amount put to tender with UDIN No. certified by Authorized charted Accountant

RequiredTenderer must have liquid assets and /or availability of credit facilities of not less than Rs.3.97 Lakhs Credit lines/ letter of credit/certificates from banks for meeting the fund requirement etc. issued the Nationalised bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional-LOC as per KW bid document.

RequiredBid capacity

RequiredOngoing work details most attached with self attested if false information submitted tender will be rejected

RequiredPostal Address with contact number

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The contractor should provide daily there staff members on site

If there is any objection regarding tender, eligibility of contractors, documents etc. The objection must be submitted before last date & time of submission of tender directly to Executive Engineer, PRE Dn, Haveri. (Not in inward).

All the scanned documents pertaining to bidder to be uploaded shall be in original & same original should be produced to The Executive Engineer (at the time of technical opening) who reserves right to verify the original documents before approval.

The work subjected to third party inspection and inspection by other govt agencies third party inspection cost is borne by the contractor at the rate of 0.5% of the gross amount of the bill third party agency is appointed by the dept.

Tenderer must have achieved in at least two financial years an average minimum financial Turn over (in all classes of civil construction works only) per financial year (ABSTRACT STATEMENT FROM CA OF 5 YEARS)

The original documents should be produced for verification at any stage of tender process as and when sought for, failing which the bidders are liable for disqualification.

Aspiring bidders/ contractors who have not obtained the user ID & Password for participating in E-Pproc in PRED,, may now obtain the same from the website www.epro.karnataka.gov.in through link contractors can contact Helpdesk HP-080 25201227 & 080 25501216

Bidders/ Contractors can access tender document on the website, fill them and submit the completed tender document into electronic tender on the website itself with in the stipulated date. The blank tender document can be obtained through our website www.epro.karnataka.gov.in where electronic tender form is provided. Additional conditions and information also can be obtained through the above mentioned site.

Contractors whose EMD has been forfeited already or black listed are not permitted to participate for this bid. Any tender submitted by such agencies will be rejected.

Incase of Cancellation of Tender, tender application fee will not be refunded or adjusted in any case.

Bidders/contractors should attach all the scanned copies of the certificates along with their registration copy with documents pertaining to the prequalification as mentioned above(as per condition No 3 on or before the last date and time mentioned through electronic tender in the website

Any arbitrary clause is not applicable to the above works. Conditional tenders are liable for rejection.

To qualify for award of the Contract, each bidder should have attained in the last five years i.e. 2020-21 to 2024-25: a) achieved in at least one financial years a minimum financial turnover (Turnover certificate with Profit and loss statements and IT returns) (in all classes of civil engineering construction works only) Rs:13.32 Lakhs. with UDIN No. certified by Authourized charted Accountant. b) Satisfactorily completed as a prime contractor, at least one similar nature of work of such as Building work of value not less than Rs. 6.66 lakhs in any one year. usually not less than 50 percentage of the estimated value of contract. Work done certificates issued by the officer not below the rank of Executive Engineer. Work done certificate with work indent number is mandatory.

Any taxes shall be paid as per the prevailing orders at that time.

Bidder must be executed 80% of quantities in any one year during last 5 years i.e. 2020-21 to 2024-25 provided in BOQ , for the items stated in bid document

Participating bidders contractors in the tender should submit the following documents along with Technical Bid in addition to documents details required as per KW-1.

Materials to be utiliszed for the work must be tested in PRED labs and quality control test reports must be enclosed to the bills. Cost of quality control tests must be borne by the contractor.

After Completion of Work Third Party/SQM/DQM Inspection Reports Submitt with the Bills

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Haveri within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008

The Eligible Contractor Should Agree the KW Bid Document Conditions.

The Work constructed under this programme shall be of very high standard, requiring no major repairs for three (1)years after completion of construction the contractors shall have to give guarantee for 1 years maintenance

The item rates are excluding GST but inclusive of all other charges.

GST shall be paid to the tendered amount separately

Any over writing of civil engineering words and measurements should be clarified the considered department ( No claims should be considered)

The Project Completion period is 6 months and the defect liability period of the work is (1) One year after successful completion of the work.

Tenderer must have liquid assets and /or availability of credit facilities of not less than Rs.3.97 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalised bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. (LOC issued by such a banks should be of UNCONDITIONAL)

Only Class-3 & above registered contractors are eligible to apply for this tender

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹33,500

Important Dates

Last Activity

7 Nov 2025

Published

7 Nov 2025

Download Ends

15 Nov 2025

BOQ Preview

•

Construction of Anganavadi Building in Hiremallur tq Shiggaon dist haveri

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Providing and applying white cement based putty of averagethickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per spe...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

•

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an eve...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing fixing of 2 track x 2 panel sliding windows made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. (Page No.55 /Item No.8.84 Volume-2 SR of 20...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

•

ELECTRICAL WORKS: Conceiled Conduit System Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and r...

•

Supplying and fixing PVC/metal conduit Deep junction box.25mm deep junction box (Page No.3/Item No.1.5.2 Ele. SR of 2023-24)

•

Supplying And Fixing Metal Fan Box with Round Hook. (Page No.4/Item No.1.13 Ele. SR of 2023-24)

•

Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified I...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Page No.9/Item No.3.6 Electrical SR of 2023-24) 6 Amps one way.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Page No.9/Item No.3.6 Electrical SR of 2023-24) Stepped Fan Regulator.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Page No.9/Item No.3.6 Electrical SR of 2023-24) 32Amps DP switch.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Page No.9/Item No.3.6 Electrical SR of 2023-24) 6/16Amps universal socket.

•

Supplying fixing of Surface mounting type retrofit type -LED tube W comprising of LED linear source with CCT 6500 degree K, CRI 70. efficacy 80 lumen per W, life 25000 burning hours and Compliance to ...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. Supplying & Fixing of 70-150 W lamp holder 2 Pin (Page No.52 / Item No.12.46 Electrical SR of 2023-24)

•

Supplying & fixing of retrofit type LED bulb. W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70. efficacy 80 lumen per W, life 25000 burning hours and Compliance to ...

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary len...

•

WATER SUPPLY AND SANITORY WORKS : Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, incl...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

•

Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid (Page No.120/Item No.13.22.2 Volume-2 SR of 2023-24)

•

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g (Page No.121 /Item No.13.24 Volume-2 SR of 2023-24)

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore (Page No.117/Item No.13.4.6 Volume-2 SR of 2023-24

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Providing and placing on terrace (at all floor levels) Polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ov...

•

Construction of Anganavadi Building in Hiremallur tq Shiggaon dist haveri (MGNREG)

•

Broken stone aggregate 40mm size

•

Broken stone aggregate 40mm size

•

Broken stone aggregate 12mm to 10mm size

•

Coarse sand (zone III)

•

Portland Cement

•

Mixer (concrete ) -1 cum Capacity

•

Size stone 20 x 20 x 25 cms

•

Bond stone 20 x 20 x 45 cm

•

Mixer (concrete small used in culvert)

•

Mason ClassI (with tools)

•

Mason Class II ( with tools)

•

Ston eChistler Class II

•

Plasticizer / super plasticizer

•

HOM of Vibrator 0.71 days

•

TMT bars Fe 500

•

Silver oako requivalent planks 38mm thick

•

Jungle wood runners and planks

•

Casurina Poles 75 -100 mm dia

•

Casurina Poles 100-150 mm dia

•

Mason (brick layer) 2nd class

•

Carpenter 2nd class

•

Fitter (grade1)

•

Mason (brick layer)Ist class

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

20192 KW 1.doc

Tender Document • 0.91 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

Construction of Anganavadi Building in Hiremallur tq Shiggaon dist haveri

Rural Development and Panchayat Raj Department

RDPR Division Office Haveri | Karnataka

Amount: ₹13.3 LCloses: 20 Nov 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published7 Nov 2025
Closed20 Nov 2025
Retendered7 Nov 2025