ADDN/ ALTN OF KITCHEN AND TOILET OF MD ACCN AND CONNECTED B/R WORKS AT DID LINE AND PROVN OF SEPTIC TANK, SOAKAGE WELL AND CONNECTED SEWAGE LINE FOR HQ DELHI AREA OFFICERS MESS AT MALL ROAD IN THE AOR OF AGE BR-II UNDER GE (EAST) DELHI CANTT-10

Amount

M & L for providing & Fixing factory made Modular kitchen and cupboard shutters with 18mm thick one side decoratives and other side balancing lamination factory pressed HDHMR Boards of action Tesa or equivalent approved make/brand including 2mm thick PVC edge bending type with Hot glue gun bending machine etc with auto closing spring loaded hings (hydraulic) type etc. with 8 mm thick both sides Prelaminated BSB ( both sides balancing proper) HDHMR of ACTION TESA and equivalent. As per IS:14587:1988 with suitable full threaded steel screw etc on the backing of racks, drawer, cupboard, kitchen counter etc all complete as per direction of Engr-in-Charge.

M & L for providing & Fixing factory made Modular kitchen and wardrope with 18mm thick both side balancing lamination factory pressed HDHMR Boards of action Tesa or equivalent aprroved brand for boxes, shelves, rack, almirah, cupboard and drawer etc incl necessary nailes, screw etc complete as per direction of Engr-in-Charge.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in cement mortar complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

M&L for joint free glazed ceramic coloured tiles of size (600X 300X 7mm ) thick set and jointed in neat cement slurry & pointed in white or coloured cement to match over and incl 15 mm thick in backing coat in CM (1:4) on vertical surfaces such as skirtings, dados etc incl circular cutting or notching and waste etc complete all as specified and directed.

S & F Pressed steel frames 105x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, complete all as specified and directed.

M S Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

Dismantling of cast iron/PVC pipes or reinforced concrete drain pipes including all fittings and accessories, 100/75 mm dia and in any position all as specified.

S & F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

S & F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

S & F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified .

S & F fixed in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified.

S & F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6, complete all as specified and as directed.

M&L for Preparing new plastered surfaces of walls and applying two coats of OBD, over a coat of primer and 2mm thick wall care putty, complete all as specified.

M&L for Preparing old plastered surfaces of walls by complete removal of existing treatment and applying two coats of OBD, over a coat of primer and 2mm thick wall care putty complete all as specified

M&L Preparing new plastered surfaces of ceiling and applying two coats of OBD, over a coat of primer and 2mm thick wall care putty complete all as specified

M&L Preparing old plastered surfaces of ceiling by complete removal of existing treatment and applying two coats of OBD, over a coat of primer and 2mm thick wall care putty complete all as specified

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 15mm, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 20mm, all as specified .

Cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 20cm girth in CM 1:3 complete all as specified and directed.

M&L for Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Description all as per item ser No -28 above but 20mm bore complete.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete

S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap complete all as specifed and directed.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs complete.

S&F in repair fancy type chromium plated long body Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore icluding CP wall flange complete

S&F in repair fancy type Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, complete.

S&F in repair Center hole basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls,complete.

S&F in repair Brass chromium plated shower rose 125 mm size with or without swivel joints, any size incl fixing to steel pipe or union complete all as specified.

S&F in repair Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specifed and directed.

S&F in repair Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete.

S&F in repair Chromium plated soap dish fixed in position complete all as specified

S&F in repair vitreous china wash basin white flat back size 550 x 400 including brackets, including cutting for and pinning in ends of bracket or erecting stand fixing of waste pipe etc complete

M&L in repair PVC (SWR) floor trap plain with grating in cluding jointing with solvent cement 63/100mm dia complete all as specified and directed.

S&F PVC (SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, as in walls/floor complete all as specified.

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia complete all as specified and directed.

S&F PVC(SWR) bends suitable for 75 mm external dia complete all as specified and directed.

S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Butt hinges medium weight, cold rolled mild steel 100mm size, complete all as specified.

S&F Aluminum, anodized, barrel tower bolts of extruded section 100 mm long, complete all as specified.

S&F Galvanised mild steel wire cloth, 0.40mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples, complete all as specified.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S & F for 30 mm thick 2nd class Hard Wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats

S&F PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts, in repairs complete.

M & L for preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer, completed all as specified and directed.

Water proofing treatment to sunken floor and verticle faces comprises the following provisions as under:- (a) After demolition of floor &lime concrete etc removal all loose particle alongwith existing water profing treatment (any No of layer) with wire brushes and cleaning the surface with water.(b) Brushsing cement slurry with 1.2Kg/Sqm of cement duly blended with and including water proofing compound (Make -Dr Fixit). (c) 15 mm thick (average thickness) plastering in CM 1:3 mixed with WPC in sunken surface ,including wall, the corner of sunken portion shall be roounded in concave shape and adequate slope shall be maintain during plastering to accomodated sump pipe and ponding the sunken portion with water minimum 48 Hrs .(d) Applying self adhesive type APP base polymeric membrane minimum weight not less than 3.00 Kg /Sqm and mimimum 3mm thick laide over sunken floor and sides fixed with sealing compound at all joint to entire satisfaction of Engineer -in Charge .(MAKE-IWP/ STP) (e) Filling the sunken area with Brick bats or PCC 1 :7:12 as in lean concrete under floor.

M&L 16-18mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. and including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exceeding 1.5 mtr in depth for foundation etc shaft, cesspits, manholes sewage line etc not exc. 10 Sqm on plan and getting out complete all as specified and directed.

Returning, filling in, trenches with soil in layers not exc 25 cm thick, watering and well ramming complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 mtr away & deposting where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Demolition and breaking up old unserviceable salt glazed stoneware pipe 150mm bore at any depth set in cement morter incl PCC bed complete all as specified and directed.

M&L for PCC 1:4:8 type D-2(using 40mm graded crushed stone aggregates) bedding for sewage lines of 150mm bore incl packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Supply and fixed class SN-8, dia of pipe 150mm & thickness of pipe as specified in IS 16098 (Part-2):2013, clause 6.3.1 table no 5 structured wall polythelene piping system (pipe with online/offline coupler and elastomeric sealing ring) with non smooth external anular corrugated and smooth internal surface (double wall) for non pressure underground sewerage & drainage application polythylene piping fitted with help of coupler attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the spigot end, lowering the same into the trench, laying at prescribed gradient, depth and alignment, testing the water tightness of the joint, ensuring the continuity tests of the specified pipe segments etc including all necessary fittings (cost of fittings, rubber rings, gaskets etc includded) complete all as specified and directed by Engineer-in-charge.

S&F Precast Plastic fibre reinforced concrete manhole cover medium duty of size 900mm x 450mm x 80mm confoming to IS- 12592 incl demolition of old RCC cover , complete all as specified and directed.

M&L for RCC Septic tank (size 5 mtr x 2 mtr) designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users including reinforcement and formwork complete all as show on drawing No : DZ-171 sheet 1/1 revised upto 15.02.2011, specified and directed.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M dia x 3.0 M effective depth including reinforcement and formwork complete all as show on drawing No : DZ/1124R, sheet 1/1 revised upto 14.05.2024, specified and directed.

M&L for brick work in CM (1:4) straight or curved on plan exc 6.0m mean radius and using old size sub class 'B' bricks all as specified.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface etc. on wall finished even and fair without using extra cement, with WPC complete all as specified.

Providing cement concrete, type 1:2:4 (20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

S GOURAV PRAKASH ENTERPRISES (BID ID -3484920)