Renovation of Deen Student Welfare (DSW) Building in Campus of Ranchi University at Sahid Chowk, Ranchi

Amount

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.15mm thickess after scrapping and propperly cleanig the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicoe additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I.

Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat as per approved design and drawing properly fabricated with joints continous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials to not supplied by the deptt)

Providing two coats of synthetic enamel paint over a coat of red oxidized paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.E/l.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 5.0mm thickness(weight not less than 12.50kg/sqm)

Providing and fixing fly proof wire gauze to windows,clearstory windows& doors with M.S.flat 15x3mm and nuts & bolts complete stainless steel (grade 304) wire gause of 0.5mm dia wire and 1.4 mm aperture on both sides including all complete job.as per direction of E/I.

Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and celetial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Easing and adjusting door and window shutters with chaukhats in old work complete as per specification and direction of E/I.

supplying, fitting and fixing 100X20X6mm L-type M.S clamp properly fishtailed, including maiking holes and setting the same in 125X100X75mm. Cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed fromM.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at200 mm centre to centre, one flange fixed to the ceiling with dashfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangeof cleat fixed to the angle hangers of 25x10x0.50 mm of requiredlength with nuts & bolts of required size and other end of anglehanger fixed with intermediate G.I. channels 45x15x0.9 mm runningat the spacing of 1200 mm centre to centre, to which the ceilingsection 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channelwith connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointingcompound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats ofprimer suitable for board, all as per manufacturer's specification andalso including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x2400x12.5 mm having approx. 15 % perforated area withperforation size and pattern as approved by the Engineerin-charge and as per manufacturer's specification, withll 4 side tapered and backed by acoustical tissue withNRC value not less than 0.60

Providing and laying polished vitrified floor tiles in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved brand & manufacturer in all colours and shades in skirting,riser of steps ,laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477 in average 6mm thickness including grouting of joints (Payment for grouting of joints to be made separeately)including all complete.(size 600x1200mm)

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.

With "A" grade white Tiles.

Providing and laying Rectified glazed Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete

Stone tile(polished) work for wall lining over 12mm thick bed of cement mortar 1:3(1cement:3 COARSE SAND) AND CEMENT SLURRY @ 3.3KG/SQM INCLUDING POINTING IN WHITE KCEMENT COMPLETE.(8 MM THICK,Granite of any colour and shade

Providing and laying vitrified Paring / Industrial tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 4457:2007, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 300x300 x 10 mm sizes.

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 -160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete .The vital physical and chemical parameters of the membrane shall be asunder : Joint strength in longitudinal and transverse direction at 23°C as350/300 N/5 cm. Tear strength in longitudinal and transverse direction as60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane

Providing and fixing floor mounted,white vitreous china single piece,double traps syphonic water closet of approved brand/make ,shape ,size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system,including all fittings and ixtures with sat cover,cistern fittings nuuts,bolts and gasket etc including making connection with the existing P/S trap,complete in all respect as per direction of E/I.

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.

S/F/F VIP Bath room fitting including all complete job as per direction of E/I.

Bib cock (Long tahread)

Angular stop cock

Mirror of 6mm thick 600x450mm

pillar cock long neck

wall mixer withtelephonic shower arrangement

Glass shelf 22"

soap dish

Towel Rail 24"

100 mm dia steel Jali

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)(Concealeld work)

20mm dianominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (PVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings..This included jointing of the pipes & fittings with one step CPVC solvent cement trencing,refilling & testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(External work)

25mm dianominal dia pipes

32mm dia to connection

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

75mm dia

Providing and fixing PVC pipe fitting including all complete job.

clip 110mm dia

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l.

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

Brick lead 8K.M(1K+7P)

Stone Metal 20 km lead

Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with Modular type switchmodular plate, Suitable size G.I Box etc. as required.

group C

Wiring for light / Power plug with 2×4 sq mm FRPVC in insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 nos 4 sqmm. FR PVC insulated copper conductor single core cable for loop earthing as required .

Wiring for circuit/submain wiring along with wiring with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5sqmm+1x1.5sqmm earth wire

2x2.5sqmm+1x2.5sqmm earth wire

2 x 4 sq mm +1 x 4 dsq mm earth wire

2 x 6 sq mm +1 x 6 dsq mm earth wire

4x6sqmm+2x6.0sqmm earth wire

Supplying anf dixing of following sizie of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

S/F Modular type switch/socket supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connections but excluding modular plaate etc as reqd.

5/6 Amps 3pin 5/6 Amp socket

15/16 amps,one way switch

5/6 amps,3 socket outlet

15/16amps,6pin socket outlet

S/F Modular type electronic fan regularor_Supplying and fixing stepped type fan regulator on the existing modular plate swith box including connections but excluding modulalr plate etcas required.

S/F Suitable size G.I.Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 3pin 5/6 Amp socket outlet and 5/6 amp. Piano type switch connection as painting etc. as req.

S/F Suitable size G.I.Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 6 pin 15/16 Amp socket outlet and 15/16 amp. Piano type switch connection as painting etc. as req.

S/F 2 Pin 5 Amp ceiling rose on the existing junction Box wooden block incuidng connection etc as reqd

S/F Brass batton / Angle Holder including connection etc as reqd

Installation testing and commissioning of pre-wired, fluorescent fitting/compact fluorescent fitting of all types,complete with all accessoreis and tube etc.including supplying and fixing ball and socket arrangment 2no downrods of 20mm diax1.6mm thick steel conduit/GI pipe uupto 30cm length,painting and wiring the down and connection with 1.5 sqmm PVC insulated,copper conductor,single core cable and earthing etc as required.

Providing and fixing extra conduit down rod of 20mm dia 2x10cm length wiring with 2x1.5mm FRPVC insulated,copper conductor .Single core cable including painting etc .as required(Note then 5cm length shall be rounded to the nearest 10cm and 5cm of less shall be ignored

I.T.C.of exhaust Fan up to 450mm sweep in the existing 0pening including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc. as reqd.

Supplying and fixing of following way, surface/recess mounting,vertical type ,415volts, TPN MCB distribution board of sheet,dust protectged duly poweder paintged,inclusive of 200 amps tinned copper bus bar, ,common neutral link,earth bar,din bar for mounting MCB'S(but without MCB 'S and incorner) as required(not:vertical type MCB TPDB is normally used where 3 phase outlets are required)

4way(8+12) Double door,vertical type

S/F”C” series SPMCB: supplying and fixing 6 amps to 32amps rating,240 volts ,10KA,"C" curve, ,miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections ,testing and commissioning etc as required.

6/32 amps , single pole

6/32 amps,DP

50/63 amps TPN

Supply Installation,testing and commissioning of follwing size ceiling fan 3 Bleades confirming to IS:374:2019 including wiring the down rods of standard length(upto 30cm) with 1.5 sqmm FR PVC insulated ,copper wire suitable for 230V 50Hz,single phase supply etc.complete as required.

1400mm(56")BI DC 5 star rating 32W ceiling Fan

Supply of metal Exaust Fan 9"(230mm) including all complete job as per direction of E/I.make Bajaj/crompton/Havells.)

S.I.T.C of floowing rating recess/surface mounted LED round/square shape down light Luminarie with prfessurfe die cast housing for single phase supply voltaage .Luminarie shall be confirm to IS:10322 Part 5/section-2 or JEC:62722 with all neccssary accessories as required

18/20 W LED Round Down light

Supplying and faixing LED batten(20/22W) including all complete job as per direction of E/I.

S/F Modular Boxes, Base & Over plate: Supplyign and Fixing Following size/modules, GI Box along with modular base & cover plate for modular switches in rooms etc as required

6 Module (78mmx205mmx500mm)

S.I.T.C of floowing rating recess/surface mounted LED round/square shape down light Luminarie with prfessurfe die cast housing for single phase supply voltaage .Luminarie shall be confirm to IS:10322 Part 5/section-2 or JEC:62722 with all neccssary accessories as required

2'x2' LED panel light

Providing and fixing XLPE insulaated PVC sheated,heavy duty armoured electric cable with aluminium conductor uptoand includig 1100V. 16sqmm 4 core

Supply of 16 sqmm aluminiulu lugs including all complete job.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of size not exceeding 35sqmm direct in ground including excavation,sand cushioning,protective covering and refilling the trench etc as requied.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of size exceeding 185sqmm but not exceeding 400 sqmm direct in ground including excavation,sand cushioning,protective covering and refilling the trench etc as requied.

Supplying and fixing of 80mm dia Earthing Electrode 2mtr,length/80mm dia earthing Electrode 3mts.Lengh/50mm dia Earthing Electrode 2mtr length/50mm d ia Earthing Electrode 3mtr.length & Backfill compound chemical 4 bag(per bag 25Kg) including all complete job.

Supplying and fixing of 25mmx5mmxcopper strip(1.15kg/mtr) including all complete job as per direction of E/I.

S/F 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode including soldering etc. as reqd.

Providing & fixing chaukhats panneling with wooden framed by 12mm thck both side best quality ply and 4mm thick water proof laminate pasting,finishing with all materials and labour all complete job as per building specification and direction of E/I.

Providing & fixing door panneling with wooden framed by 12mm thck both side best quality ply and 1mm thick water proof laminate pasting,finishing with all materials and labour all complete job as per building specification and direction of E/I.

Providing and fixing wardrob or book self unit/Almirah with 12mm ply wood over sunmica including allmaterials,labour,taxes all complete as per building specification and direction of E/I.ply Board-19mm thick green,centure or ISI mark water proof ply Grade,outside Laminate:1mm thick green Lam/century Lam, inside Laminate-0.8mm thick Green lam/century Lam channel/soft closing hinge:-Hetich(202 S.S.grade) lock of Furniture:Godrrej/cent,Handle/Jali-Brass/S.S.finish Handel,Door closer-Helix/Ebco/Hettich/Yama(202-SS grade) edge Binding-same Laminate/PVC

S/F/F all height wall panneling or TV uniit with 12mm thick water proof ply(centure panic pine wood ISI mark,Termites) over 50mmx25mm aluminium section,2mm thick water proof veneer(green dacore wood) finishing with malamine polished all complete inclouding all complete job as per building specification and direction of E/I

Fabrication,installation with 16Swg MS sheet with one coat steel primer and two coat spray painting with approved shade making PCC plinth and foundation including fitting fixturing connection transpotation upto work site,labour charge etc all complete as reqd(sub panel)(a) 400 amp.four pole,on-load change over switch 1nos(b) 4 pole MCCB,125amp,16KA 4nos(c)4 pole MCCB,25/100amp,16KA s 13nos(d) volt meter 1nos(e)Amp meter 1nos(f)C.T.coil 3nos(g)indictor 3nos(h) 45mmx25mm copper strip 22kg. including all complete job.as per direction of E/I.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

MATRIKA CONSTRUCTIONS AND DEVELOPERS