WBPHED/EE/MD/NIeT_42 of 2025-2026, Sl. No. 08

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (a) Upto area 2.5 Sq.m

Stripping off worn out plaster and raking out joints of walls, ceiling etc. upto any height and in any floor including removing rubbish within a lead of 75 m. as directed.

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. (a) upto 150 mm. thick.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineerin- Charge prior to execution will be necessary).

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal , loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.

Brick work with 1st class Bricks in sand cement Morter (6:1) including raking out joints scaffolding & curing etc. completed as directed by Engineer- in- Charge. a) In foundation and Plinth :

b) In Superstructure :

Ordinary cement concrete ( mix 1:1.5:3 ) with graded stone chips ( nominal 20 mm size) excluding shuttering and reinforcement. If any, Pakur Variety.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m. i) Tor steel/Mild Steel II. JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL

125 mm thick Brick work of 1st class bricks with cement morter (1:4). a) in Superstructure.

Removing loose scales blisters etc. from old painted surface and throughly smoothening the surface to make the same suitable for receiving fresh cost of paint.

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Neat cement punning in wall /dado, window sills, floor drains etc. in all floors about 1.5mm thick.

Plaster to wall, floor etc with sand and cement morter (1:6) including rounding off or champhering corners as directed and racking out joints or roughing of concrete surface including throating, nosing and drip course where necessary (In all floors). a) With 6:1 cement morter. i) 15 mm thick plaster in Ground Floor.

Second Floor

b) With 6:1 cement morter. i) 20 mm thick plaster in Ground Floor. Ground Floor.

Second Floor

(C) With (4:1) Cement mortar (i ) 10mm. Thick plaster Ground Floor.

Second Floor

Artificial stones in floor, dado, stair case etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed, with topping made with ordinary or white cement (as necessary) and murble dust in proportion (2:1) including smooth finishing and rouding off corners and including application of cement slurry before flooring works, using cement @1.75 kg./sq.m. all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement. a) 25mm. Thick.

Hire charges for shuttring with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beam, columns, lintles curved or straight including fitting, fixing and striking out after completion of works. (In all floors) 25mm to 30mm thick wooden shuttering as per decision and direction of Engineer-In-Charge.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) Two Coats i) Solvent based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Luxury Quality

Wood work in door & window frame fitted & fixed in position complete including a protective coat of painting at the contact surface of the frame. Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.. In Ground Floor:

Second Floor

M.S.clamp for fixing door, windows frame made of flat iron end bifarcated mixed in cement concrete with stone chips(1:2:4) fitted and fixed complete as per direction. (a)40mmx6mm. 200 mm length.

Polishing only of old marble or terrazo work with oxalic acid powder using 33 gms/ sq.m. by manual labour / machine where necessary.

Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado.

Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone.

Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] In 2nd Floor (a) Area of each Granite slab above 1.00 Square meter.

Supplying, fitting, fixing marble slab/tiles, 15 mm. to 18 mm. thick in dado / wall in 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slurry @ 4.4 kg/ sq.m at the back side of marble & pointing in cement mortar (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding, staging, curing complete. [White cement, Pigment to be supplied by the Agency] (b) With Chawk Doongri (iii) Area of each tile exceeding 0.6 sq.m but not excedding 1 sq.m.

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stonefloor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e)

Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length of the work). a) Fixed glazing.

i) Top, bottom and side member.

ii) Glazing clip.

b) Louvered window.

i) Top, bottom and side member.

ii) Louvered Section.

iii) Cleat angle ( Non-annodized).

c) Fixed partitions. (Unsupported length of vertical member more than 1.5 mtr.or both ends of vertical member restrained but panels more than 0.9 sq.m.)

i) Top , bottom & side member.

ii) Intermediate member.

iii) Glazing clip.

Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. i) For openable / Casement windows. a) EPDM / weather gasket for outer frame and mullion. i) weather gasket / wool pile for door vertical.

Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge. ( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc) 10-12 Micron thickness Annodizing film Natural white unit wt of to Top & side frame @1.366 kg/m ; top rail @ 1.296 kg/m; bottom rail @ 1.974 kg/m; lock rail @ 1.590 kg/m; door vertical @ 1.412 kg/m; glazing clip @ 0.167 kg/m. ) [Note : for estimate purpose construction wing may consider weight of Aluminium door @ 9.0 Kg per Sq.M]

Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (a) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating).

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:- Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling and aligning fitted with inbuilt locking arrangement cutting the glass / board (prelaminated / particle / block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprine /EPDM gasket, along with all other necessary arrangements for fixing the partition to walls, floors, beams, columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing and specifications and direction of the Engineer in charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, fastener but excluding the cost of extruded aluminium sections, EPDM gasket, glass, board, glazing clips, locking arrangement, etc. I) For partitions using section of size: b) 101.50mm x 44.45 mm

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987; (A) clear, toughened glass conforming to IS: 2553-1992 (part-II).

i) 6mm thick clear glass.

ii) 6mm thick coloured / tinted / smoke glass.

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor.

i) 19mm Gr Floor

ii) 19mm 2nd Floor

iii) 12 mm Gr Floor

iv) 12 mm 2nd Floor

v) 6 mm 2nd Floor

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.5mm.

(i) Thickness of laminate 1.5mm 2nd Floor

Providing and fixing of factory made uPVC Sliding window (White Colour) complete, (U value= 1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable) a) 2 Track 2 Sash window frame of size 67 x 54 mm & Sash of size 64 x 47 mm both having wall thickness of 2.3 ± 0.2 mm.

Panel shutters of door & window as per design (each panel consisting of single plank without joint) including fitting & fixing the same in position but excluding the cost of other fittings in G.F. a) 35 mm thick shutter with 19 mm thick panel. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.

Ground Floor

2nd Floor

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor. (a) 35mm thick shutters (single leaf).

Iron butt hinges of approved quality fitted and fixed with steel screws with I.S.I. Mark(oxidised fitting).

(a)100mm. X 58mm. X 1.90mm.

(b)75mm. X 47mm. X 1.70mm.

Supplying Aluminium casted body hydraulic door closer as per I.S.I.

Godrej Hydraulic door closer fitted and fixed complete. (a) Heavy type

Door stopper.(Brass)

Lifting up bodily (1.5 x 0.9 x 0.9) meters wooden work bench table with drawers or reagent racks along with sink and waste pipe and removing the same outside the room carefully without disturbing or damaging other furniture and resetting again after completion of channel drain construction.

Supplying 125 mm. Dia acrylic handle for aluminium door as per approved make & brand. (a) Natural Colour.

supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN -1154, of approved quality of reputed brand as per direction of Eingineer-in-Charge fitted and fixed complete including all incidental charges.

Supplying, fitting and fixing Godrej Multi Lock or equivallent.

Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.

Anodised aluminium barral/tower/socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.I. specification (I.S.204/74) fitted & fixed with cadmium plated screws. (a)150mm long x 12mm dia. bolt.

Supplying anodised aluminium catch hook with eye fitted and fixed to shutter and chowkat complete of best quality: (i) 150mm long.

Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5mm (± 0.2 mm) made out of single piece extruded PVC profile, with mitred cut joint sand joint with 2 nos. of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 mm x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The doorframe to be fixed to the wall using 8 x100mm long anchor fasteners complete, all as per manufacturer‟s specification and direction of Engineer -in- charge.

Supplying, fitting & fixing factory made solid panel foam PVC (density shall not be less than 600 kg/cum) door shutter consisting of 19 SWG thick M.S. tube of size 40mm X 20mm for styles and top, lock & bottom rail and welded together to form outer framework including a coat of approved make steel primer. M.S. frame shall be covered with 5mm thick heat moulded PVC channel to form 30mm X 100mm styles and 5mm thick PVC sheet on either side of panel to form 30mm X 125mm top, lock & bottom rail where 15mm (5mm X 3) thick and 20mm wide PVC sheet to be provide as gap insert for top & bottom rail. For panel 10mm PVC sheet to be fitted with stiles & rails with 30mm X 5mm PVC sheet beading on either side of panel and additional 30mm PVC beading as gap insert below top & bottom rail on either side of panel joined together using solvent cement adhesive. An additional 5mm thick and 20mm wide PVC strip to be stuck on the interior side of the PVC channel using using solvent cement adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In Ground floor.30mm thick single leaf shutter with 10mm thick panel. (a) Pre-laminated Colour.

Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. (i) Surgeon's wash basin 650 mm X 450 mm.

Supplying, fitting and fixing Wall- Hung Closets with compatible allen key bolts. (Asian paint BATHSENSE variety model no. WH-40-UF,compatible allen key bolts:AB-01-X ) i) Wall- Hung Closets (480x345x360)

Supplying, fitting and fixing One piece Closets, Aspiro Italian collection. [Hindware Italian collection Cat no. 20126(S-10), Cat no. 20127(S-18), Cat no. 20122(S-22)] i) One piece Closets (65x36x75cm).

Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware i) With 'S' trap (with vent)

Supplying, fitting and fixing Waste Coupling. 7" pop up waste coupling (Asian paint BATHSENSE variety model no. C230M ).

Supplying, fitting and fixing Robust Flush Valve Bodies. (Asian paint BATHSENSE variety Body FV1.5", model no. B2FV102 )

Supplying, fitting and fixing Robust Flush Valve Bodies. (Asian paint BATHSENSE variety UPPER DOUAL FV ROUND, model no. E330F )

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. i) 635 mm X 395 mm X 420 mm.

Supplying, fitting and fixing Flat Back Urinal-Medium. ( Asian paint BATHSENSE variety model no. UR-22-MS )

Supplying, fitting and fixing 10 litre P.V.C. low -down cistern conforming to I.S. Specification with P.V.C. fittings complete , C.I. Brackets including two coats of painting to bracket etc.

Supplying, fitting and fixing 10 litre P.V.C. Flush Tank with P.V.C. fittings complete ( Asian paint BATHSENSE variety model no.PT-23-X )

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. i) 750 mm long.

Supplying, fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe with PVC coupling at one end fitted with necessary clamps. i) 1050 mm long.

Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) C. P. Flush Pipe.

(i) Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand).

Supplying, fitting and fixing SINK COCK (wm). (Asian paint BATHSENSE variety Code no.CLSC101 )

(ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand).

Supplying, fitting and fixing Angle Cock with WF. (Asian paint BATHSENSE variety Code no.CLAC101 )

Supplying, fitting and fixing CP Pillar Cock. SLMB W/O PWS length of Spout:6.1", Height of Aerator:9.3". (Asian paint BATHSENSE variety Code no.MABM103 )

Supplying, fitting and fixing CP Pillar Cock. Pillar cock EB Length of Spout: 5.85", Height of Aerator:8.25". (Asian paint BATHSENSE variety Code no.INPC102 )

Supplying, fitting and fixing Bib Cock 2 in 1 with WF. (Asian paint BATHSENSE variety Code no.INBC102)

Supplying, fitting and fixing Upper SLCD HF push pull compatable with B2DV201 AND B2DV202. (Asian paint BATHSENSE variety Code no.INDV111U)

Supplying, fitting and fixing Button Spout for hand shower. (Asian paint BATHSENSE variety model no.MYSP102 )

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm

Supplying, fitting and fixing towel brackets. (Asian paint BATHSENSE variety model no. SQTW401 )

Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass (i) 25 mm dia. and 600 mm long

Supplying, fitting and fixing Stainless steel Wall Mounted Hinged hand rail (750X100 mm) covered by Nylon surface with contour finish (for better grip) with two brackets.(Model Code No.B2210108 of CERA or equivalent.) 750 mm long.

Supplying, fitting and fixing porcelain soap tray of approved make. (i) Recessed soap tray of size 150 mm X 150 mm

Supplying, fitting and fixing liquid soap container. (a) Cromium plated.

Supplying, fitting and fixing Tooth brush and Tumbler holder of approvedmake of size 140 mm X 65 mm (porcelain).

Supplying, fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary.

Supplying, fitting and fixing concealed cistern of approved make with flash plate Cute/Loop/Shell/Nova (Code No. concealo-H(80mm Body sap code 508179 of Hindware or equivalent). Matt/Gloss

Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).

Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model - Tropical / Sumthing Special of ESSCO or similar).

Supplying, fitting and fixing ESSESS hand Shower. Zenith Rub-IT HF With pipe & hook. (Asian paint BATHSENSE variety Code no. C232U )

Supplying, fitting and fixing ESSESS Shower. 10" Rainfall Shower (Square), W/O ARM(SS) (Asian paint BATHSENSE variety model no. RF-208 )

Supplying, fitting and fixing ESSESS hand Shower. 4" HS (Round) 3F Easy Click with 1.5M Tube & Hook. (Asian paint BATHSENSE variety Code no. HS-207 )

Supplying, fitting and fixing 24" RFS ARM(Square) for Rainfall Shower. (Asian paint BATHSENSE variety Code no. SA110N )

Supplying, fitting and fixing high performance diverter body for shower, bib cock, hand shower. (Asian paint BATHSENSE variety Body SLCD 40MM, High flow push, model no. B2DV202,

Supplying, fitting and fixing high performance diverter body for shower, bib cock, hand shower. (Asian paint BATHSENSE variety Body CSC 20 MM, model no. B2CC102 )

Supplying, fitting and fixing ESSESS Extension Nipple 3". (Asian paint BATHSENSE variety model no.EN30 )

Supplying fitting & fixing UPVC Pipes A - Type and fittings conforming to IS : 13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc. if necessary and mending good damages including joining with jointing materials (Spun Yarn, Valamoid/Bitumen/M-Seal etc.) complete. i) 110 nn dia

ii) Bend 87.5 degree 110 mm. dia.

Approved patent vent cowl I.C.I. conforming to I.S.S. i) 100 mm. dia.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately). i) 20 mm.

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately). (A) For Exposed Work i) 25 mm dia. medium quality.

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (i) CPVC Pipes Class-1, SDR-11.

iii) 40 mm

(b) For Concealed Work (i) CPVC Pipes Class-1, SDR-11 i) 25 mm

Supplying , fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips (4:2:1) and cement plaster (6:1) to match and curing complete in all repect.

iii) 40 mm

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

iii) 50 mm

French polishing to wood work including preparing surface (ordinary gloss) (a) On new wood work polish.

French polishing to wood work including preparing surface (ordinary gloss) (b) On old French polished surface including complete removal of the old polish.

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

b) on steel or other metal surface. iv) Two coats ( with any shade except white).

Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 300 mm long.

Iron door ring of approved quality fitted and fixed with nut and washer complete. i) 50 mm dia.

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. i) With Pakur variety. (JSW/JSPL /SHYAM/ SRMB/ BMASL /ELECTROSTEEL/SSL)

b)Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : With super gloss (hi-gloss) a) on Timber or plaster surface. Two coats ( with any shade except white).

Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood battens of size 37.5mmx25mm). In ground floor. (b) 25mm mesh.

Earthwork in excavation in foundation trenches or drain in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading & stacking the spoil within a lead of 75m as directed. The item includes necessary trimming the sides of trenches. Levelling, dressing and ramming the bottom, bailing out of water as required complete. (a) Depth of excavation not exceeding 1500 mm.

Earthwork in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. a) with earth obtained from excavation of foundation.

Filling in foundation or plinth by fine sand in layers not exceeding 150mm as directed and consolidating same by thorough saturation with water ramming complete. Including the cost of supply of sand.( Payment to be made on measurment of finished quantity ).

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx).

Painting block letters or digits in Black Japan or any approved paint as per direction. i) Size above 5 cm. and upto 7.5 cm.

Supplying, Fitting & fixing different factory made Metal Craft Sheet (excluding cost of metal crafting) incluing cost of powder coating (for M.S, Aluminium plate) & finished metal sheet with all fitting accessories complete in all respect as per diection of Engineer-in-Charge. Stainless Steel Plate i)1.5mm thick.

Supply of M.S Sheet 12 mm thick of standraed with 1.00 mtr and length would be decided by the E.I.C. conforming to I.S:2062/92, 1039/89, 1731/89 etc including all taxes and free delivery at Divisional store of malda Arsenic Area W/S Division, PHE. Dte. Malda.

Supplying Poly. Bucket (12 Ltr. Capacity) : 1 No. & Poly. Mug : 1 No. (1 Set) for using water both at Latrine/Toilet etc. including supply of Bleaching Powder and spreading day to day cleaning of toilet all complete as per direction of the E.I.C. (Local rate) (For bathing &Toilet purpose )

Supplying, fitting and fixing C.I. square jalli. 225 mm.

H.C.I. bell mouth plain trap supplied, fitted and fixed with valamoid joint complete 100 mm dia and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paidseperately).

Supplying fitting and fixing in position reinforced cement polymer concrete manhole cover with matching frame as per IS-12592 (MD) a) 5MT load bearing capacity round manhole cover parovided with two nos. lifter hook with machining frame of size 550mm x 65mm(cover) and 650mm x 125mm(frame) opening 470mm and WT. 90KG. approx.

Supplying, fitting galvanised 3ply12gauge/4points lineof barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wire sintaut condition with straining bolts including the cost of cuttingandof lapping joints in the wire as necessary but excluding the cost of galvanised staples, straining bolt and binding wire where necessary. (Payment to be made on the length of individual lines of wire.).

Supplying fitting and fixing 600 mm (+/- 30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.).

Reparing collapsible gate by cutting out all rivets as necessary reassambling all members including welding pieces of channels, sraightening bent bars and rivetting with new rivets and fitting in position and painting two coats.

Easing and oiling, cleaning collapsible gate and repairing to locking arrangements.

Methor Mistry

Methor Mazdoor

Labour for shifting Materials, Furniture, Rubbish….etc.

Extra for staging beyond 4 m in any floor (Mode of measurement: area in plan x mean height of staging upto soffit of shuttering above initial 4 m).

Orthopedic Mattress (Kurlon-6'x7')

Sofa with cover.

Supply and installation of LG 80 cm (32 inch) Full HD LED T.V.

Supply, fitting, fixing of 25mm dia stainless steel hollow tube rod for curtain and socket with hanging arrangement including all complete(Excluding curtain cloth).

Supplying, stiching, fitting & fixing designers exclusive curtain cloth made up of velvet/satin of renewed makeand approved shades including white satin cloth for lining and hanging beads with necessary rings including cutting, sewing, hanging complete as per direction of the E.I.C.

Supplying, stiching, fitting & fixing designers exclusive curtain cloth made up of velvet/satin of renewed makeand approved shades including white satin cloth for lining and hanging beads with necessary rings including cutting, sewing, hanging complete as per direction of the E.I.C.

Supplying,fitting, fixing and installation of network system for office of the Superintending Engineer, NBC-II.

24 Port Switch

LAN CONFIGURATION

PVC CASING PIPE

RACK 4U

OTHERS SERVICE MATERIALS

Supply, delivery & fitting-fixing of 18 W, 4 ft long LED Batten as directed by EIC.

S & F USHA 15 L Storage Watn Geyser (WARMBOY. Grey), Copperf'ro . Whirl Flow Technology, Glass line coating, Magnesium Anode Advantage or eqivalent as per direction of El C Supply & delivery.

S & F of 240V 48" sweed BEE 5 star rating (minimum) AC ceiling fan (make Crompton Greaves-Enregion Groove Remote Anti Dust, Satin sand or equivalent model) as directed by EIC.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Add Includng GST @18%

Add Includng CESS @1%