SPECIAL REPAIR TO BLDG NO P-10 AND PROVN OF GUARD ROOM AT DRUGMULLA AND DAWAR UNDER THE AOR OF GE 874 EWS

Amount

Treatment of sunken floor slab comprises of the following specifications and steps complete all as specified and directed.:-

(a) Demolition of lean cement concrete up to any depth/bottom of sunken floor, any type of filling in sunken portion, removing debris & cleaning the bottom and vertical surface of wall up to the finished floor level.

(b) M&L for PCC (1:2:4) type B-0 using 12.5 mm aggregate stone aggregate, average 75 mm thick, maintain the slope of 1:40 towards the outgoing spout pipe, providing 32mm dia GI pipe, medium grade, spout projected at least 150 mm beyond outer face of wall including cutting of hole in RCC beam and brick wall.

(c) M&L for providing plaster 15 mm thick in CM (1:4) mixed with water proofing compound @ 3% by weight of cement to the floor and side walls upto the finished floor level.

(d) M&L for applying evenly two layers of industrial bitumen 85/25 @ of 1.20 Kg/Sqm in each layer over floor and vertical surface of sunken floors including cleaning the surfaces. Applying a layer of polymeric modified APP based membrane not less than 3mm thick, weighing not less than 3 kg per sqm, reinforced with polyester non- woven fabric (weighing not less than 150 gm per square metre), which shall be laid by torch application. Side overlaps of membrane shall be 100mm, ends laps shall be 150 mm and overlap joints shall also be sealed by torch application.

(e) M&L for providing 300 mm thick PCC (1:5:10), type E-2 using 40 mm graded brick aggregate,. The sunken portion of Nahani / floor trap and pipe joints shall be embedded in PCC (1:3:6) type C-0 using 12.5 mm aggregate stone aggregate. Necessary leakage shall be tested in CI pipes / joints /slabs / with filling the water for 72 hours and it shall be ensured that there is no leakage is found, else the above treatment shall be repeated till satisfactory result are found.

(f) PCC (1:2:4), type B-0, using 12.5 mm aggregate stone aggregate, 75 mm average thickness shall be laid at the top of slab maintaining a slope of 1:40 towards the outgoing pipe, surface shall be finished even and smooth with using extra cement.

Note :- (i) Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is included in the rates quoted above. (ii) All debris obtained from site will be thrown away out side MD land by contractor at his own expense. (iii) For payment purpose the plan area of sunken floor shall be taken into accounts.

Demolition of cement concrete unreinforced in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection finished even and fair without using extra cement complete all as specified and directed.

M&L for 50 mm thick PCC 1:2:4type B-0(using 12.50 mm graded aggregate) for floor complete all as specified and directed.

Demolition of Brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 Complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls, any description, including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra lime or cement) in cm (1:4) complete all as specified and directed.

M&L For rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC, surface finished even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid separately.

Supply only water proofing compound as per IS-2645. complete all as specified and directed.

M&L for Providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for Preparation of New plastered surfaces of ceiling and applying two coat of White Wash complete all as specified and directed.

M&L for Preparation of New plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer all as specified.

M&L For Preparation of old plastered surfaces of ceiling and applying two coats of White wash complete all as specified and directed.

M&L for applying Acrylic Smooth exterior paint of required shade: New work/old Work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.06sqm but nexc 0.11 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone aggregate) complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 300x200mm and 7mm thick as in vertical surface such as in skirting and dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade approved quality10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 thick screed mortar in CM 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic tiles, light shade, approved quality10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 10 thick screed mortar in CM 1:4 complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 using 20mm grade stone aggregate, 25mm thick levelling in floor complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

S & F Pre- painted galvaniume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof Ridge/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

S&F Anodised aluminium snap grid frame work Size of grid 605 x 605mm for false ceiling complete all as specified and directed.

M&L For Providing and fixing Gypsum board 12mm thick in ceiling fixed with screw as per manufactures instructions complete all as specified and directed.

M&L for Preparation of newly un treated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not otherwise described over 10 cm width or grith etc complete all as specified and as directed.

M&L for Preparation of old wooden surface and applying two coat of synthetic enamel paint surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed.

Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm (without taking off shutters from chowkhat) complete all as specified and directed.

Taking down chowkat with shutters n. exc.1.5Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed.

S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid complete all as specified and directed.

S & F Plain, framed, panelled shutters second class soft wood 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S & F Glazed and skeleton shutters, second class soft wood 30 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed. Note:- Door frame shall be water proof, termite proof, elegant and shall have excellent screws holding strength to fix hinges and hold doors properly for a long life.

S&F 100 mm long butt hinges extruded aluminium anodised complete all as specified and directed.

S&F 75 mm size mild steel butt hinges medium weight complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium anodised alloy handles fabricated type 150mm size of handle complete all as specified and directed.

S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S & F in in repair Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed.

S&F For 20mm tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F For 15mm tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair bib taps cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.

S&F in repair 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified and directed.

S&F lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe section of density 144 Kg \cum conforming to IS 9842 along with chicken mesh wire netting 25 guage , 20 mm mesh complete all as specified and directed.

All as per item No 54 above but for 20mm bore pipe.

Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed.

S & F for 100 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors pipes are epoxy coated inside & outside

S&F 100 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls complete all as specified and directed.

S&F cast iron bends 100 mm bore, diminishing pieces or tapers (larger bore measured). complete all as specified and directed.

S&F 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls complete all as specified and directed.

S&F bends 75 mm bore, cast iron diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F cast iron branch pieces 75 mm bore single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F cast iron branch pieces 100 mm bore, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F cast iron 100 mm bore bends (any radius) with duck's foot or heel rest complete all as specified and directed.

S&F cast iron 75 mm bore bends (any radius) with duck's foot or heel rest complete all as specified and directed.

S&F cast iron 100 mm bore sockets (double) collars complete all as specified and directed.

S&F cast iron 75 mm bore sockets (double) collars complete all as specified and directed.

S&F cast iron swan necks (or offsets) upto 152 mm projection complete all as specified and directed.

S&F mirror cabinet of size 540x340mm and 130mm thick with Shelf with PP & PPCP complete all as specified and directed.

Supply & fixing in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified and directed.

S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

S & F in repair Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and directed.

S & F in repair towel rail 450mm long of PTMT fixed with and including Chromium plated brass sand screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed.

S & F in repair toilet paper holder of vitreous China fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repairs two way angular stop cock chromium plated 15mm dia complete all as specified and directed.

S&F in repair PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair stop valves cast copper alloy, fancy type,chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe complete all as specified and directed.

S&F in repair PVC connection 15 mm bore and 450 mm length fixed, complete all as specified and directed.

S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified.

S&F in repair Pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F Soap dish any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F one peace vitrified China wash down water closet pan pedestal pattern integrated flush tank white or coloured include p or s trap etc complete all as specified and directed.

S & F in repair Health faucet (ABS Body) mild steel Cr plated suitable for 15 mm dia pipe with 1.25 m long tube complete all as specified and directed.

S & F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)

S & F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed..

M&L for preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces complete all as specified and directed.

S&F in repair Alluminium Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and complete all as specified and directed.

S&F in repair swivel shower rose (fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mmx420mm and bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F 20 mm thick, Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off edges including cutting hole for wash basin fixing as per required size completed as specified and directed.

S & F Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other complete all as specified and directed.

S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank all accessories be combined all rates Coated ,complete all as specified in SSR Part I.

S&F in repair ball valves, high pressure, with polythene float and flynut complete,20mm bore complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L for preparation of mew steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint over a one coat of Primer complete all as specified and directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep & getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n exc 25cm complete all as specified and directed.

Removal of excavated materials n. exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for plain Cement concrete 1:4:8 type D-2 (using 40mm stone aggregate) in sub base filling and mass concrete all as specified and directed.

M&L RCC M-30 (Design mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC M-30 (Design mix) as in Columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L RCC M-30 (Design mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns, and stanchions, etc finish with rough finish flat surface complete all as specified and directed.

M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, sheeves including sup-ports, overhangs, etc. also splays between floors and beams, etc finish with rough finish flat surface complete all as specified and directed.

M&L Fe -410-W(gde-E-250) Quality A mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall including priming the plastered surfaces and applying two coats of cement based paint complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:4 other than fair faces of brick work or as a screed bed for vertical surfaces of wall complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work/concrete surfaces in CM 1:6 finishing the surface fair & even complete all as specified and directed.

Supply and fixing 10 mm dia and over mild steel TMT bars, cut to length, bent to shape required cranking bending and binding with and including mild steel wire annealed not less than 0.90 mm dia. complete all as specified and directed.

All as specified in item No 115 here in before but 6 to 8mm dia as in stirrups.

M&L RCC (nominal mix) Type B0 1:2:4 (12.5mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for form work to soffits of suspended slab, roof beam haunching girder bressummers, lintels such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for hardcore (broken stone or boulders) of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled / rammed to a true surface complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screeding laid and jointed in neat cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 thick screed mortar in CM 1:6 complete all as specified and directed.

M&L for plywood, grade BWR, type BB fixed with nails to timber frame work as in ceiling 6 mm thick complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening complete all as specified and directed.

M & L for mild steel work as in hold fast of flat Iron size 25mm x 3mm thick for PVC door chowkhat etc complete all as specified and directed.

S&F for 100mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

M&L for Aluminium alloy anodised sliding door bolt 200mm long complete all as specified and directed.

S&F Mild steel pressed handle, oval type stove enamelled, black size of handle 150mm complete all as specified and directed.

Mild steel tower bolt stove enamelled black 150mm long black with bright bolt and fixed complete all as specified and directed.

M&L for treating ends of posts, back of chowkats etc with coal tar black paint, area tarred exc 0.10 sqm but n exc 0.50 sqm each including preparation of wooden surfaces complete all as specified and directed.

M&L for applying 3 Coats of colour wash on newly plaster surface including preparation of surfaces complete all as specified and directed.

M&L preparing newly plasterd surfaces and applying three coats of white wash on ceiling complete complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall /floor etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall /floor etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and directed.

S&F in repair PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement in complete all as specified and directed.

S & F Waste coupling of PTMT (half or full thread ). ( Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe to WHB , sink complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets (10 Ltr) capacity, with flush pipe etc complete all as specified and directed.

M&L for Vitreous China water closet pan (pedestal pattern), white with seat cover and hinging device ,fixing bolts etc (excluding flushing cistern and including flush pipe) complete all as specified and directed.

S & F tubular towel rail 60cm long, aluminium anodised fixed with and including CP brass screws and wooden/plastic cleats complete all as specified and directed..

M&L for LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, 150 mm thick PCC 1:4:8 below foundation, Vent shaft, connection etc., for 5 users complete all as specified and as directed.

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.5 mtr deep in soft soil/loose soil complete all as specified and directed.

M&L for cement concrete bed (1:3:6) type C-2 using 40mm graded stone aggregate to drain pipes of 150mm bore including packing under hunching against the site of pipe after they are laid and tested complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (20mm graded aggregate) for coping, including weathering slightly rounded or chamfered using form work (straight or curved) complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends complete all as specified and directed.

M&L for construction of Soakage well, of size 1.2 m dia at bottom and 1.5 m total depth complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 3/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors complete all as specified and directed.

Taking down DB's including MCB's etc complete all as specified and directed.

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces.

M & L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC Conduit of suitable size (as per site requirement) including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, modular metal flush boxes (metal switch board of any type and size) with modular metal frame plate and white cover for housing switch required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed for One light /one fan/one bell point controlled by one switch.

All as per item No 148 herein before but for one socket outlet 5 pins 5 amps controlled by one switch on same board.

All as per item No 148 herein before but for one socket outlet 5 pins 5 amps controlled by one switch on independent board.

All as per item No 148 herein before but wiring with 2.5 sqmm copper wire ( FRLS) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

All as per item No 148 herein before but wiring with 4.0 sqmm copper wire ( FRLS) and 4.0 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 6-32 amp complete all as specified and directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed.

S & F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

S & F Bell, AC, 230 volts, single pole complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing Circular/Square (as per site Requirement) shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free motion sensor light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F in replacement LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300m complete all as specified and directed.

M & L in replacement of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply and fix LED Bulb 9 Watt complete all as specified and directed.

Supply and fix in replacement of ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 6 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surface including taking down old unserviceable submain wiring and making good disturbed surface complete all as specified and directed.

S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed.

Supply and fixing of water heater storage type, electric capacity 25 ltr along with all accessories BEE 5 star rated complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion and including complete earth work complete all as specified and directed.

Supply and laying or fixing in replacement, or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section in service connections complete all as specified and directed.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5A, flush type complete all as specified and directed.

S & F switch socket combination 3 pin 5A, flush type complete all as specified and directed.

S & F switch socket combination 5 pin 15 A, flush type complete all as specified and directed.

S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished cable any size, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

Taking down MCCB and DB's complete etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

Supply and fix in replacement of MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA, complete all as specified and directed.

Supply, Laying, jointing and testing with replacement of LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection of sizw 35 sqmm 3.5 core complete all as specified and directed.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed. Note:- Punned thickness only shall be measured and paid.

Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed.

Supplying and fixing, light grade, Galvanised mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed as for cable protection of size 50 mm bore complete all as specified and directed. (Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule ):-

M & L for cutting, threading and joining of existing GI pipe line upto 50 mm dia and inserting suitable tee for taking branch connection complete all as specified and directed.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply, Laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed of sizes 16 sqmm 2.0 core.

patriotic builders (BID ID -3452909)

M/s Shamas Parwaiz Bhat (BID ID -3452142)

Bidder Name

patriotic builders

M/S BEE AAY CONSTRUCTIONS

M/s Shamas Parwaiz Bhat