Supply and Laying of 3Core 95Sqmm 11kV Grade HT Cable and Providing HT HRC Fuses and associated works at TE Gokulam Mysore. Sw. Laying of 11kV Grade HT Cable Supply of HT Fuses and associated works III RECALL

Amount

HT cable laying

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV HT grade of following size in the following manner as per Dept specification etc as reqd. a.) Upto 120 sq. mm i) Direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

ii ) in the existing RCC/ HUME/ METAL pipe as required.

iii) In the existing masonry open duct as required.

Cutting the cement concrete flooring/ path way upto 6" (inches) depth & 12" (inches) width for the laying of armoured HT cable & refilling the trench, Providing cement concrete of proportion 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) & making good damages etc as reqd. Note: This Item is Optional ,shall be operated, if reqd at Site, Upon approval of JTO/SDE (In-charge)

Supplying and making Following HT end termination with heat shrinkable pot head Kit, including Lugs and other jointing materials, for the HT cable of size 3 core 95 Sqmm HT XLPE aluminium conductor cable of 11 KV grade using the T&P like gas actuated blow lamp, consumables like HT sleeves, HT insulating tapes for all the 3 Phases by engaging HT cable joint expert i/c required T&P like gas blow lamp, Crimping tool and associated items complete etc as required. (Make: Reychem or 3M or SS Make) i) In- Door 11Kv HT end termination with heat shrinkable pot head Kit

ii) Out -Door 11Kv HT end termination with heat shrinkable pot head Kit

Supply of 25 Amps HT HRC Fuses suitable for operation on 9Kv/ 11Kv HT supply complete etc as reqd. (Make: Eshwari/ Phoenix /Anand or SS Make)

Supplying and Fixing cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 30 cm Wide X 10 cm Thick X 60 cm Height including inscription in RED Colour duly engraved, positioning the same in the cable route 1 Foot below and One Foot above ground level etc as required.

Supplying and fixing following size ''B'' Class GI pipe for Cable protection i/c fixing the same to the HT Structure horizontal members , with suitable heavy duty clamps , securing it with nut bolts washers securely / filling of bitumen compound at Top, to avoid water entry etc xomplete as required Make: TATA/JINDAL Make Only i) 6" dia ''B'' Class GI pipe

Sujan Electricals (BID ID -808321)