Andaman Nicobar

Active

Works

Civil Works - Buildings

Providing roofing and repairs/replacement of door and windows at Division Office RCD, APWD, Wimberlygunj.

Chief Engineer Andaman Public Works Department (APWD)

RCD, APWD, Wimberlygunj | South Andamans, Andaman And Nicobar Islands

Amount: ₹23.9 LCloses: 19 Oct 2026Due tomorrow

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published12 Oct 2026
Closes19 Oct 2026
Bid Opening21 Oct 2026

Tender Value

₹23.9 L

EMD Value

₹47,817

Closing Date

19 Oct 2026, 3:00 pmDue tomorrow

Tender Inviting Organisation

Name

Executive Engineer, RCD, APWD, Wimberly Gunj

Address

Executive Engineer, RCD, APWD, Wimberly Gunj

Work Description

Providing roofing and repairs/replacement of door and windows at Division Office RCD, APWD, Wimberlygunj.

Tender Information

Tender ID

2026_APWD_25166_1

Reference Number

72/EE/RCD/APWD/WG/26-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

90 days

Location

RCD, APWD, Wimberlygunj

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredScan Copy of EMD (.pdf)

RequiredCertificates of Work Experience. (.pdf)

RequiredAffidavit as per clause 1.2.1 of CPWD 6 shall be submitted on non-Judicial Bond/Stamp paper. (.pdf)

RequiredGST Registration Certificate if already obtained by the bidder. (.pdf)

RequiredBidding capacity Form C-3 as per Page No.40 of NIT. (.pdf)

RequiredUndertaking as per Page No. 41 of NIT. (.pdf)

Required10 (Ten) years Financial Audited Statement of account from a CA as per Form A at page No. 42 of NIT (.pdf)

Finance

RequiredPrice Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹47,817

Important Dates

Last Activity

12 Oct 2026

Published

12 Oct 2026

Bid Opening

21 Oct 2026

Download Starts

12 Oct 2026

Download Ends

19 Oct 2026

Submission Starts

13 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (35 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
1.01	Of area 3 sq. metres and below	11	each	353.05	₹3,883.55
2Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
2.01	G.S. Sheet	417.5	sqm	157.95	₹65,944.13
3	Providing and Applying specialized repair concrete mix or mortar of approved brand and quality confirming to IS specification for the repair of structural members like column beams etc which includes: 1) providing of temporary supports at joints of beams and columns. ii) preparation of damaged area by chipping and removing all loose or crumbling concrete, debris and dust etc. using a pick and brush upto a depth of arround 25 to 50 mm arround the reinforcement to get proper access. iii) Thorough cleaning of exposed steel with wire brush and rust removal solution to remove all rust and applying anti corrosion or rust converter coating to protect it frfom future corrosion, if more than 15% of steel is corroded then bind or weld new steel to the old rebar alongwith shear reinforcement for beams and binders for columns. iv) Apply a ready to use specialized repair concrete mix or mortar to the prepared surface after making the surface wet to ensure proper bonding and finshing the surface to match the original shape and thereby curing the repaired area properly as directed by EIC.	66	sqm	1,862.3	₹1,22,911.8
4Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
4.01	With cement mortar 1:4 (1 cement : 4 fine sand)	226	sqm	657.65	₹1,48,628.9
5Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
5.01	Electric resistance or induction butt welded tubes	448	kg	198.5	₹88,928
6	Providing and fixing pre painted galvanised(PPGL) steel profile sheets AZ-150 of brand TATA Bluescope steel, Everest Industries Ltd,JSW Steel Ltd, Jindal India Ltd or equivalent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with alu zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping alu screws(Xylan) of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	417.5	sqm	1,020.5	₹4,26,058.75

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.05 MB

Work Item Documents

Tenderdocument72.pdf

Tender Documents • 2.25 MB

BOQ_26622.xls

BOQ • 0.27 MB

Instructions-to-bidders.pdf

Additional Documents • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
1.01	Of area 3 sq. metres and below	11	each	353.05	₹3,883.55
2Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
2.01	G.S. Sheet	417.5	sqm	157.95	₹65,944.13
3	Providing and Applying specialized repair concrete mix or mortar of approved brand and quality confirming to IS specification for the repair of structural members like column beams etc which includes: 1) providing of temporary supports at joints of beams and columns. ii) preparation of damaged area by chipping and removing all loose or crumbling concrete, debris and dust etc. using a pick and brush upto a depth of arround 25 to 50 mm arround the reinforcement to get proper access. iii) Thorough cleaning of exposed steel with wire brush and rust removal solution to remove all rust and applying anti corrosion or rust converter coating to protect it frfom future corrosion, if more than 15% of steel is corroded then bind or weld new steel to the old rebar alongwith shear reinforcement for beams and binders for columns. iv) Apply a ready to use specialized repair concrete mix or mortar to the prepared surface after making the surface wet to ensure proper bonding and finshing the surface to match the original shape and thereby curing the repaired area properly as directed by EIC.	66	sqm	1,862.3	₹1,22,911.8
4Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
4.01	With cement mortar 1:4 (1 cement : 4 fine sand)	226	sqm	657.65	₹1,48,628.9
5Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
5.01	Electric resistance or induction butt welded tubes	448	kg	198.5	₹88,928
6	Providing and fixing pre painted galvanised(PPGL) steel profile sheets AZ-150 of brand TATA Bluescope steel, Everest Industries Ltd,JSW Steel Ltd, Jindal India Ltd or equivalent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with alu zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping alu screws(Xylan) of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	417.5	sqm	1,020.5	₹4,26,058.75

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

1.01

Of area 3 sq. metres and below

each

353.05

₹3,883.55

2Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:

2.01

G.S. Sheet

417.5

sqm

157.95

₹65,944.13

Providing and Applying specialized repair concrete mix or mortar of approved brand and quality confirming to IS specification for the repair of structural members like column beams etc which includes: 1) providing of temporary supports at joints of beams and columns. ii) preparation of damaged area by chipping and removing all loose or crumbling concrete, debris and dust etc. using a pick and brush upto a depth of arround 25 to 50 mm arround the reinforcement to get proper access. iii) Thorough cleaning of exposed steel with wire brush and rust removal solution to remove all rust and applying anti corrosion or rust converter coating to protect it frfom future corrosion, if more than 15% of steel is corroded then bind or weld new steel to the old rebar alongwith shear reinforcement for beams and binders for columns. iv) Apply a ready to use specialized repair concrete mix or mortar to the prepared surface after making the surface wet to ensure proper bonding and finshing the surface to match the original shape and thereby curing the repaired area properly as directed by EIC.

sqm

1,862.3

₹1,22,911.8

4Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

4.01

With cement mortar 1:4 (1 cement : 4 fine sand)

226

sqm

657.65

₹1,48,628.9

5Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

5.01

Electric resistance or induction butt welded tubes

448

198.5

₹88,928

Providing and fixing pre painted galvanised(PPGL) steel profile sheets AZ-150 of brand TATA Bluescope steel, Everest Industries Ltd,JSW Steel Ltd, Jindal India Ltd or equivalent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with alu zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping alu screws(Xylan) of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

417.5

sqm

1,020.5

₹4,26,058.75