NIT No. 989/TC/EinC/PWD/25-26

OFFICE OF THE EXECUTIVEENGINEER E/M DIVISION PWD DURG (C.G.)

TERMS & CONDITION

NAME OF WORK :- Construction of 100 Bedded Girls Hostel Building I/c Water Supply and Sanitary Fittings, Sump Well, Septic Tank, Rain water harvesting, Boundry wall, I type Choukidar Qtr, Approach road & Electrification work at CSVTU Campus Bhilai (Newai) Distt.- Durg (C.G.)

1. Electric installation shall be carried out in accordance with the General Specification for Electrical Works (Part - I Internal) & (Part - II Exlernal) 1972 of C.P.W. D. adopted by E- In-C M.P.W.D. Bhapal & also : Confider With Indian Electrical Rule 1956 as amended. Up to Date.

2. Civil contractor should Subler the Electrical Work only those Electrical contractor who are Registered in PWD for Electrical Work as following class.

(I) "D" Class Electrical Contractor - Up to 1.00 Crore

(II) "C" Class Electrical Contractor - Up to 2.00 Crore

(III) "B" Class Electrical Contractor - Up to 10.00 Crore

(IV)"A" Class Electrical Contractor - Unlimited

3. Contractor will submit along with final bill.

(a) Completion Certificate

(b) Completion Plan drawn to a suitable seale on tracing cloth with ink. Indicating Location of main switch , D.B. Circuit fitting and their location

4. The Contractor will be fully responsibility for any accident damages and losses occurred due to negligence of work. The amount of the losses and damages etc. Will be recovered from the Contractor.

5. The Contractor shall have his own tools and plants, helmet, hand gloves, first aid box and other safety measures. In good working condition for staff No. Extra payment shall be made for this arrangement and no Claims shall be paid by the department.

6. The Contractor himself shall be fully responsibility for any accident casualty of the staff if occurs due to Electrical fault or any other reason during the work and no claim will be paid for such accident of causality by the department.

7. The Contractor will be fully responsibility for taking all of safety measures during contract period.

(a) Electrical power supply arrangement temporarily at site will be made by contractor No payment will the made by PWD Department

(b) Earthing system should be installed in presence of A. E. (e/m)/ Sub Engineer (E&M)

8. Earth Continuity conductor of required size & material should be installed with entire run of wiring Earth nut bolt must be provided at all switch boards All metallic parts Ceiling fan tube fitting socket out let should be essentially connected to earth.

9. All Connection of ceilling fan, tube fixture, street light fixture shall be made by Core PVC/ Rubber sheathed cable of required.

10. The Civil contractor should have a Electrical Supervisor for Electrical works at site as per Norms of C.G./ M.P. Govt. who Electrical Diploma/ Degree Holder as Required as per PAC Amount.

NAME OF WORK :- Construction of 100 Bedded Girls Hostel Building I/c Water Supply and Sanitary Fittings, Sump Well, Septic Tank, Rain water harvesting, Boundry wall, I type Choukidar Qtr, Approach road & Electrification work at CSVTU Campus Bhilai (Newai) Distt.- Durg (C.G.)

LIST OF APPROVED MATERIALS FOR ELECTRIFICATION WORK

S.No. Name of Item Make

1 Flush type Switches/Sockets/Power Plugs 5A/15/Amps, Angle Holder/Batlen Holder and Ceiling Roses 3 Plate 1. Hevell's (Febio) 2. Legrand (Myrious) 3. Schneider (Livia) 4. Anchor (Roma)

2 PVC Wires (Fire Ratardant) 1.5 Sqmm. / 2.5 Sqmm./4 Sqmm./4 Sqmm & 6 Sqmm. 1. KEI, 2. Polycabe 3. Anchor 4. Finolex, 5. RR cable

3 PVC Pipe & its accessories (a) 2 mm Thick for concealed wiring as well as for Surface 1. Plaza 2. 9GREENS 3. BEC Plast 4. Polycab

4 MCCB, Pannel, Main Switches/Change over Switches 1. Schneider 2. L&T 3. Legrand, 4. C & S

5 Power Cable HD 1. Polycabe 2. R R Cable 3. KEI, 4. Finolex 5. Gloster

6 Ceiling fan 1200 mm/ 14000 mm 1.Polar 2. Orient 3. CROMPTON 4.Usha

7 Fresh air Fan/Exahust Fan 1. Bajaj, 2. CROMPTON 3. Usha

8 LED light (luminaries) LED Bulb & LED Street light fitting, LED Tube light fitting/ Tube Rod Bulb 1. Arya 2. Wipro 3. Finolex 4. Bajaj 5. Energy Green 6. Sourish 7. Orient

9 Submersible Pump 1. SABAR 2. Texmo 3. Cromplon 4. CRI

Note :- All Makes are approved by S.E. (E/M) Circle office Raipur.

Sub divisioner officer

PWD E/M Sub Division

NIT For Construction of 100 Bedded Girls Hostel Building I/c Water Supply and Sanitary Fittings, Sump Well, Septic Tank, Rain water harvesting, Boundry wall, I type Choukidar Qtr, Approach road & Electrification work at CSVTU Campus Bhilai (Newai) Distt.- Durg (C.G.)

PAC Rs 365.04 Lacs

SERIAL No. Department SOR Year Item Code Description UOM Rate Quantity Amount

1 PWD PWD BLD 2015 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. 1.1.1) In all types of soils. cum 185.000 3138.793 580677.000

2 PWD PWD BLD 2015 1.1.2 In Ordinary Rocks cum 267.000 303.170 80946.000

3 PWD PWD BLD 2015 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). sqm 7.200 3000.000 21600.000

4 PWD PWD BLD 2015 1.4 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. sqm 3.700 3000.000 11100.000

5 PWD PWD BLD 2015 1.6.1 Extra for every additional lift of 1.5 m or part thereof. All Types of soil cum 26.500 990.500 26248.000

6 PWD PWD BLD 2015 1.7 Extra rate for quantity of work executed in or under water and/ or liquid mud including pumping out water. cum 51.000 606.330 30923.000

7 PWD PWD BLD 2015 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. Cum 65.000 1270.340 82572.000

8 PWD PWD BLD 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. cum 371.000 4612.881 1711379.000

9 PWD PWD BLD 2015 1.22 Supplying chlorpyrifos/ Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified. litre 208.00 537.330 111765.000

10 PWD PWD BLD 2015 1.25.1 Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite. Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm sqm 27.500 1700.000 46750.000

11 PWD PWD BLD 2015 1.25.2 Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). metre 19.00 295.000 5605.000

12 PWD PWD BLD 2015 1.25.3 Treatment of outer side of plinth masonry wall using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall at the junction of floor at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). metre 13.50 295.000 3983.000

13 PWD PWD BLD 2015 2.1.1 Form Work Providing and fixing form work including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. sqm 139.000 2558.716 355661.000

14 PWD PWD BLD 2015 2.1.2 Wall of any thickness including attached pilasters, buttresses etc. in super structure. sqm 228.000 80.000 18240.000

15 PWD PWD BLD 2015 2.1.3 Window sills, anchor blocks, string course, bends, copings, bed plates and like. sqm 184.00 264.420 48653.000

16 PWD PWD BLD 2015 2.1.4 Edge of slab, breaks in floor and walls upto 200mm. metre 34.000 590.000 20060.000

17 PWD PWD BLD 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape sqm 297.000 1328.760 394642.000

18 PWD PWD BLD 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) sqm 235.000 2006.670 471567.000

19 PWD PWD BLD 2015 2.1.8 Beams, lintels, cantilevers & walls sqm 202.000 1683.710 340109.000

20 PWD PWD BLD 2015 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 294.00 408.770 120178.000

21 PWD PWD BLD 2015 2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings sqm 230.000 72.620 16703.000

22 PWD PWD BLD 2015 2.3 Extra for providing fixing and removing of propping from lower floor upwards for the concreting. Propping should be provided two floors below. The props of lower floor must be 50% of the props of the floor above including wedging etc. complete. In case propping is done in one floor below, only half the rate shall be paid. sqm 17.00 1700.000 28900.000

23 PWD PWD BLD 2015 3.1.3 Cement Concrete (PCC/ RCC) Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). cum 2970.000 314.153 933035.000

24 PWD PWD BLD 2015 3.1.5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4073.00 8.780 35761.000

25 PWD PWD BLD 2015 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.(Note :Excess/ less cement used as per design mix is payable/ recoverable separately) 3.2.1) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4163.000 1018.913 4241734.000

26 PWD PWD BLD 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Ground Floor cum 97.500 324.780 31666.000

27 PWD PWD BLD 2015 3.4 First Floor cum 195.000 222.130 43315.000

28 PWD PWD BLD 2015 3.4 Second Floor cum 292.500 21.840 6388.000

29 PWD PWD BLD 2015 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: Thermo-Mechanically treated bars FE 415 kg 54.500 116644.289 6357114.000

30 PWD PWD BLD 2015 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. cum 4237.000 0.380 1610.000

31 PWD PWD BLD 2015 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. kg 43.500 2.740 119.000

32 PWD PWD BLD 2015 3.15 Applying a coat of hot bitumen VG-10 using @ 1.7kg/ sqm on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. sqm 93.50 7.520 703.000

33 PWD PWD BLD 2015 4.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of WC, kitchen and the like consisting of: i) 1st course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 including rounding off junction of vertical and horizontal surface. ii) 2nd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound including rounding off junction of vertical and horizontal surface. iii) 3rd course of applying blown or residual bitumen applied hot @ 1.7 Kg. per sqm of area. iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg. per sqm of area. sqm 445.000 63.250 28146.000

34 PWD PWD BLD 2015 4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 coarse sand) cum 3817.000 86.500 330171.000

35 PWD PWD BLD 2015 4.13.2 Cement mortar 1:3 (1 cement : 3 coarse sand) cum 4612.00 34.600 159575.000

36 PWD PWD BLD 2015 7.5.3 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:5 (1 cement : 5 coarse sand) cum 3350.000 153.188 513179.000

37 PWD PWD BLD 2015 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263.000 630.820 2058364.000

38 PWD PWD BLD 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Ground Floor cum 121.000 354.748 42924.000

39 PWD PWD BLD 2015 7.6 First Floor cum 242.000 200.850 48606.000

40 PWD PWD BLD 2015 7.6 Second Floor cum 363.000 63.740 23137.000

41 PWD PWD BLD 2015 7.11.2 Cement Mortar 1:4 (1 cement : 4coarse sand) Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: Ground Floor sqm 382.000 399.410 152575.000

42 PWD PWD BLD 2015 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: Ground Floor sqm 11.000 186.770 2054.000

43 PWD PWD BLD 2015 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: First Floor sqm 22.000 212.640 4678.000

44 PWD PWD BLD 2015 7.20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. sqm 62.500 399.410 24963.000

45 PWD PWD BLD 2015 7.25 Providing and laying AAC Autoclaved aerated concrete block confirming to IS: 2185 (Part-3)-1984) in block masonry with AAC blocks of width 100/ 200mm height 200/250/300mm, length 400/500/600 mm (approved sizes) with cement mortar 1 :6 (1 Cement :6 coarse sand) in superstructure. AAC blocks should have specific gravity 0.6 to 0.65 and crushing strength should not be less than 3 N/ sqmm (testing as per IS: 6441 - 1972). cum 4541.00 25.300 114887.000

46 PWD PWD BLD 2015 8.14.2 Providing and fixing flush door shutters, core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering on one face and commercial ply veneering on the other face of the shutter with vertical grains, cross bands and face veneering excluding hinges. sqm 1688.000 251.270 424144.000

47 PWD PWD BLD 2015 8.15 Extra for double leaf shutter instead of single leaf. sqm 52.000 11.340 590.000

48 PWD PWD BLD 2015 8.18.3 Providing and fixing lipping with second class teak wood lipping on all edges of shutters. 35 x 6 mm size metre 54.50 782.500 42646.000

49 PWD PWD BLD 2015 8.51.2 Providing and fixing 38 mm thick wooden shelves supported on 40x40x6 mm T or L in brackets fixed at suitable distance in 75x75x150mm blocks of cement concrete 1:2:4: Bijasal, Haldu, Benteak, Khair sqm 2955.00 158.400 468072.000

50 PWD PWD BLD 2015 8.125.1 Providing and fixing aluminium door mounted door stopper with necessary nickel plated iron screws etc complete. 100 mm long each 45.00 81.000 3645.000

51 PWD PWD BLD 2015 8.132.1 Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete. 150x2.5mm (heavy) each 97.50 512.000 49920.000

52 PWD PWD BLD 2015 8.138.1 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete. 300mm each 92.500 256.000 23680.000

53 PWD PWD BLD 2015 8.139.1 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 250 x10mm each 97.00 154.000 14938.000

54 PWD PWD BLD 2015 8.139.2 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 200 x10mm each 70.50 102.000 7191.000

55 PWD PWD BLD 2015 8.140.1 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 150 mm each 24.50 264.000 6468.000

56 PWD PWD BLD 2015 9.6.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Kg 68.00 1200.000 81600.000

57 PWD PWD BLD 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. kg 67.500 2747.250 185439.000

58 PWD PWD BLD 2015 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames kg 73.50 2426.930 178379.000

59 PWD PWD BLD 2015 9.47.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion kg 331.00 1044.230 345640.000

60 PWD PWD BLD 2015 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). Kg 338.00 447.530 151265.000

61 PWD PWD BLD 2015 9.51.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4 mm thickness Sqm 611.00 175.500 107231.000

62 PWD PWD BLD 2015 9.57.1 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. SS Grade 204 kg 467.000 330.000 154110.000

63 PWD PWD BLD 2015 11.1.2 Plastering and Pointing Work Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) sqm 87.000 2362.810 205564.000

64 PWD PWD BLD 2015 11.2.4 Providing and making 12mm thick cement plaster of mix: 11.2.4) In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 91.500 3511.740 321324.000

65 PWD PWD BLD 2015 11.3.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: 11.3.3) In Cement Mortar 1:5 (1 cement : 5 fine sand) sqm 113.000 278.600 31482.000

66 PWD PWD BLD 2015 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: 11.3.4) In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 107.000 2551.100 272968.000

67 PWD PWD BLD 2015 11.5 Neat Cement punning. sqm 33.000 96.800 3194.000

68 PWD PWD BLD 2015 11.7 Providing and making 18 mm thick cement plaster with under layer of 12mm thick cement plaster 1:5 (1 cement : 5 fine sand) finished with a top layer of 6mm thick cement plaster 1:3 (1 cement : 3 fine sand). sqm 163.00 2444.000 398372.000

69 PWD PWD BLD 2015 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer. kg 43.50 2746.900 119490.000

70 PWD PWD BLD 2015 11.40 Making grove in cement plaster while plastering upto10 mm deep and 10 mm wide. metre 1.30 750.000 975.000

71 PWD PWD BLD 2015 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. sqm 86.000 1239.970 106637.000

72 PWD PWD BLD 2015 11.42 Providing sand faced plaster to concrete or brick masonry surface in all positions in two coats, base coat 13mm thick in C.M. 1:4, cleaning the surface by combing it and finishing coat 8mm thick in C.M. 1:3 and taking out grains on surface by hand operated mechanical arrangement with cost of all material labour, all leads & lifts, and scaffolding etc. complete. sqm 180.00 1616.232 290922.000

73 PWD PWD BLD 2015 12.1 FLOORING Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg/ sqm for receiving cement concrete floor including roughening cleaning etc complete. sqm 34.00 3290.580 111880.000

74 PWD PWD BLD 2015 12.3.1 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 40 mm thick sqm 222.000 24.390 5415.000

75 PWD PWD BLD 2015 12.7.1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm sqm 587.000 671.200 393994.000

76 PWD PWD Road 2015 12.9.1 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm sqm 692.000 209.160 144739.000

77 PWD PWD BLD 2015 12.65.2 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Pigment Coloured (rubber mould) precast interlock concrete blocks sqm 632.00 364.000 230048.000

78 PWD PWD BLD 2015 12.76.1 Providing and laying glezed vetrified floor tiles (GVT/PGVT) with digital print of random design with water absortion less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in all colours, shades and size mentioned below (+/- 10mm) laid on 20mm thick cement mortal 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm thickness 9 to 10 mm sqm 964.00 1809.040 1743915.000

79 PWD PWD BLD 2015 14.57 Providing and applying 2mm thick white cement based polumeric Exterior grade Putty with minimum 3 coats applied @ 5.4K.g. /10 sqm as per relevant IS Code 17545: 2021 (Product such as Asian Trucare, Berger Happy Walls Putty, Birla Opus one pro smooth ) to make the surface smooth and even with all tools tackles and labour etc. complete for the work. ( This Item to be use in heigher grade painting works Item No.-14.65) Sqm 95.000 10604.860 1007462.000

80 PWD PWD BLD 2015 14.59 Primer Providing and applying Polymeric cement primer on all surface applied @0.80 litrs/10 Sqm as per relevant I.S. code 15489:1974 (Product suc as Birla white primecoat/actiecoat, Asian Trucare, Dulux interior cement primer, Opus Acrylic Primer ) with all tools tackles and labour etc. complete for the work. sqm 29.000 22825.962 661953.000

81 PWD PWD BLD 2015 14.61 Distemper Providing and applying Synthetic Oil Bound washable Distemper having VOC content less than 50gms/lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg/10Sqm as per relevant I.S. Code 428:2000 (Product such as Asian Tractor synthetic distemper, Berger Bison Lite, Dulux Magic, Birla Opus Style super smart ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. sqm 57.000 129.190 7364.000

82 PWD PWD BLD 2015 14.62 Providing and applying Acrylic wasable Distemper of lite econocmy plastic emulsion paint having VOC centent less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 kg/ 10 sqm as per relevant IS Code 428.2000 (product such as Tractor Unol, Dulux Duval, Berger Bison, Opus Style/ lite economy emulsion product such as Asian Tractor Spark, Dulux Promise sheen, Neroloc Litil master, Bergers Bison Lite, Nippon superio.) inclusive of providing abro tape on edges and article and cleraing of door, windows, floor and surface as required with all tools tackles and labour complete for the work. sqm 64.000 135.600 8678.000

83 PWD PWD BLD 2015 14.64 Providing and applying PREMIUM Plastic Emulsion paint with roller application minimum 3 coats applied @ 0.75 lit/ 10 sqm up to final finish as per relevant I.S. Code 15489:2013 Type-1 class D, C (Glossy and Semi Glossy Finish) of required shade (Product such as Asian Apcolite Premium , Dulux Super Cover, Berger Easy Clean , Nippon Breeze Metex Gold, Opus I-50/ Calista) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc complete for the work. ( With 3 year Warranty.) sqm 84.000 8160.860 685512.000

84 PWD PWD BLD 2015 14.68 Providing and applying on exterior surface with PREMIUM Exterior Emulsion paint of required shade to give protective and water proof finish minimum 3 coats applied @ 1.40 lit/ 10 sqm up to final finish as per relevant I.S. Code 15489:2013 Type-2 class D, C (Glossy/ Semi (Product such as Asian Apex, Dulux Weather Shield Prima E900, Berger Weathercoat Antidust, Nerolac Everlas Excel, Nippon Everlas Excel, Nippon Sumo Etra, Opus True Flex) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc complete for the work. ( With 3 year Warranty.) sqm 84.000 4060.232 341059.000

85 PWD PWD BLD 2015 14.72.1 Providing and applying Glossy finsh Enamel paint minimum 2 coats in all surface applying @0.75 lit/10 sqm up to required finish as per relevant I.S. Code 2932 :2013 of ( Product such as Asian Apcolite Premium Enamel, Dulux Promise premium Enamel, Nerolac Synthetic Enamel, opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of doors, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. (With 3 year Warranty) sqm 120.000 684.940 82193.000

86 PWD PWD BLD 2015 18.1.1 SANITARY INSTALLATIONS Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required White Long pattern W.C. pan of size 580 mm each 2459.000 20.000 49180.000

87 PWD PWD BLD 2015 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type each 2882.000 10.000 28820.000

88 PWD PWD BLD 2015 18.9.1 Providing and fixing ISI marked plastic seat with lid for pedestal type W.C. pan complete: White/ black each 620.000 2.000 1240.000

89 PWD PWD BLD 2015 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm each 1430.000 22.000 31460.000

90 PWD PWD BLD 2015 18.21.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 1040x510 mm bowl size 460x410x200mm each 8539.000 4.000 34156.000

91 PWD PWD BLD 2015 18.25.2 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia each 88.500 24.000 2124.000

92 PWD PWD BLD 2015 18.29 Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 599.000 24.000 14376.000

93 PWD PWD BLD 2015 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. metre 182.000 100.000 18200.000

94 PWD PWD BLD 2015 18.76.2 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 100 mm dia pipe. metre 267.000 350.000 93450.000

95 PWD PWD BLD 2015 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm each 113.000 160.000 18080.000

96 PWD PWD BLD 2015 18.77.1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm each 154.000 240.000 36960.000

97 PWD PWD BLD 2015 18.77.2.1 Double Y with or without door 75 mm each 129.000 12.000 1548.000

98 PWD PWD BLD 2015 18.77.3.2 Vent covel 110mm each 44.000 20.000 880.000

99 PWD PWD BLD 2015 18.77.5 P trap 110mmx110mm long each 227.000 26.000 5902.000

100 PWD PWD BLD 2015 18.77.6 Nahani trap 110x75mm each 90.500 70.000 6335.000

101 PWD PWD BLD 2015 18.78.1 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm each 57.000 30.000 1710.000

103 PWD PWD BLD 2015 19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., 15 mm nominal outer dia .Pipes. metre 133.000 150.000 19950.000

104 PWD PWD BLD 2015 19.5.2 20 mm nominal outer dia .Pipes. metre 167.000 150.000 25050.000

105 PWD PWD BLD 2015 19.5.3 25 mm nominal outer dia .Pipes. metre 213.000 220.000 46860.000

106 PWD PWD BLD 2015 19.5.4 32 mm nominal outer dia .Pipes. metre 284.000 80.000 22720.000

107 PWD PWD BLD 2015 19.7.5 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 40 mm dia. nominal bore metre 364.000 120.000 43680.000

108 PWD PWD BLD 2015 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) each 382.000 62.000 23684.000

109 PWD PWD BLD 2015 19.14.3 Long body bib cock (500 grams) each 426.000 4.000 1704.000

110 PWD PWD BLD 2015 19.14.5 Two way bib cock (800 grams) each 708.00 4.000 2832.000

111 PWD PWD BLD 2015 19.14.6 Stop cock (concealed) (600 grams) each 494.000 102.000 50388.000

112 PWD PWD BLD 2015 19.14.7 Angle valve for basin mixer and geyser points (450 grams) each 382.000 10.000 3820.000

113 PWD PWD BLD 2015 19.14.14 Soap dish plate each 163.000 20.000 3260.000

114 PWD PWD BLD 2015 19.14.15 Shower rose (revolving type) (150mm) each 269.000 24.000 6456.000

115 PWD PWD BLD 2015 19.14.16 Towel rail (600mm long x 20mm dia) each 338.00 34.000 11492.000

116 PWD PWD BLD 2015 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) set 774.00 10.000 7740.000

117 PWD PWD BLD 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 51.000 102.000 5202.000

118 PWD PWD BLD 2015 19.18.3 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 40 mm nominal bore each 688.000 20.000 13760.000

119 PWD PWD BLD 2015 19.18.4 50 mm nominal bore each 993.000 10.000 9930.000

120 PWD PWD BLD 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank . litre 7.300 15000.000 109500.000

121 PWD PWD BLD 2015 19.49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : each 8013.00 10.000 80130.000

122 PWD PWD BLD 2015 19.51 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : each 4356.00 20.000 87120.000

123 PWD PWD BLD 2015 20.1.2 DRAINAGE Providing, laying and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints 150 mm diameter Mtr. 262.000 50.000 13100.000

124 PWD PWD BLD 2015 20.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 150 mm diameter S.W. pipe Mtr. 436.000 50.000 21800.000

125 PWD PWD BLD 2015 20.3.1 Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type each 1339.00 10.000 13390.000

126 PWD PWD BLD 2015 20.7.1 Constructing brick masonry manhole with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : each 6703.00 15.000 100545.000

127 PWD PWD BLD 2015 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. each 1709.000 6.000 10254.000

128 PWD PWD BLD 2015 21.1.1.3 RAIN WATER HARVESTING & TUBEWELLS Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level. All types of soil 150 mm dia. metre 339.000 30.000 10170.000

129 PWD PWD BLD 2015 21.1.2.3 Rocky strata including Boulders. 150 mm dia. metre 396.000 60.000 23760.000

130 PWD PWD BLD 2015 21.2.2.3 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level. Rocky strata including Boulders. 150 mm dia. metre 424.000 60.000 25440.000

131 PWD PWD BLD 2015 21.5.3 Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge. 150 mm nominal dia metre 1304.000 30.000 39120.000

132 PWD PWD BLD 2015 21.12.3 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp. each 1055.000 2.000 2110.000

133 PWD PWD ROAD 2025 3.12 Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.>5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) cum 238.000 1976.63 470438.000

134 PWD PWD ROAD 2025 4.2 (A) Drainage Layer of Granular Sub-Base for RIGID PAVEMENT Construction of granular sub-base by providing garaded granular material mechanically mixed in plant confirming to required grading mentioned in Appendix-VI and Clause 5.7.3.9 of IRC:58-2015, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. By Plant mix Method ( With mechanically crushed stone only) (A) For Sub-Base as per AASTHTO 93 : Garding 6 of Table VI-I cum 1494.000 342.56 511785.000

135 PWD PWD ROAD 2025 4.11 (B) Construction of Shoulders Construction of shouldeers with selected soil from borrow pits/ borrow areas having CBR not less than 12 and shall have L.L. and P.I. not more than 25% and 6% respectively, inclusive of all existing surface, providing required cross fall, compacting watering rolling etc. complete as per clause 408. (B) With smooth wheeled roller cum 313.000 315 98595.000

136 PWD PWD ROAD 2025 6.3 (i) Providing and Laying cement concrete for plain comcrete/reinforced concrete i/c form work, shuttering complete in as per drawings and specifications. ( For Village Roads) P.C.C. M-10 cum 3449.000 212.63 733361.000

137 PWD PWD ROAD 2025 6.4 Providing and laying Un-reinforced Cement Concrete without Dowel bars including formwork and expansion, contraction & longitudinal joints as per design and as per IRC-62, over a prepared base as per Drawing for pavement thickness less than 200mm in Low Volume Roads. With Cement concrete grade M-30 and minimum cement content @375kg/cum cum 4748.000 393.75 1869525.000

138 PWD PWD ROAD 2025 9.7 (A) (i) Providing and laying of a reinforced cement concrete pipe dust , 300 mm dia complying ti IS : 458 , across the road ( new construction ), extending from drain to drain in cuts and toe of slopes to toe of slopes in fills, excluding constructing head walls at ends, providing a fill of granular material over top and sides of RCC Pipes , bedding on a 0.3 m thick layer of granular material free of rock pieces , outer to outer distance of pipes at least half dia of pipe subject to minimum 450mm in case of double and triple roe ducts joints to be made leak proo , invert level of duct to be above higher than ground level to prevent entry of water and dirt , all as per IRC : 98 and apprpved drawing NP-3 Pipe Single row for one utility service 300mm dia (A) NP-3 Pipe (i) Single row for one utility service 300 mm dia meter 1117.000 60 67020.000

139 PWD ELECT 2020 1.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)1.7.1 Short Point Point 266.00 32 8512.00

140 PWD ELECT 2020 1.7.2 Medium Point Point 424.00 54 22896.00

141 PWD ELECT 2020 1.7.3 Long Point Point 588.00 401 235788.00

142 PWD ELECT 2020 1.8 Wiring for twin control light point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 420.00 6 2520.00

143 PWD ELECT 2020 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 216.00 171 36936.00

144 PWD ELECT 2020 1.10 Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.10.3 Long Point Point 922.00 28 25816.00

145 PWD ELECT 2020 1.10.4 Extra Long Point I Point 1302.00 12 15624.00

146 PWD ELECT 2020 1.10.5 Extra Long Point II Point 1657.00 15 24855.00

147 PWD ELECT 2020 1.10.6 Extra Long Point III Point 1995.00 15 29925.00

148 PWD ELECT 2020 1.11 Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.11.3 Long Point Point 1350.00 18 24300.00

149 PWD ELECT 2020 1.11.4 Extra Long Point I Point 1807.00 17 30719.00

150 PWD ELECT 2020 1.11.5 Extra Long Point II Point 2315.00 22 50930.00

151 PWD ELECT 2020 1.11.6 Extra Long Point III Point 2825.00 18 50850.00

152 PWD ELECT 2020 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)1.13.1 3 X 1.5 sq. mm in 20mm conduit Metre 92.00 398.00 36616.00

153 PWD ELECT 2020 1.13.2 3 X 2.5 sq. mm in 20mm conduit Metre 111.00 1295.00 143745.00

154 PWD ELECT 2020 1.13.3 6 X 2.5 sq. mm in 25mm conduit Metre 172.00 436.00 74992.00

155 PWD ELECT 2020 1.13.4 9 X 2.5 sq. mm in 32mm conduit Metre 238.00 294.00 69972.00

156 PWD ELECT 2020 1.13.5 12 X 2.5 sq. mm in 32mm conduit Metre 288.00 192.00 55296.00

157 PWD ELECT 2020 1.13.6 3 X 4 sq. mm in 25mm conduit Metre 145.00 140.00 20300.00

158 PWD ELECT 2020 1.13.14 6 X 10 sq. mm in 40mm conduit Metre 515.00 249.00 128235.00

159 PWD ELECT 2020 1.13.15 6 X 16 sq. mm in 50mm conduit Metre 772.00 162.00 125064.00

160 PWD ELECT 2020 1.15 Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 9537 (2000 Part 5) 1.15.2 25 mm Metre 53.00 100 5300

161 PWD ELECT 2020 5.4 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. 5.4.9 Fan regulator (two module size) electronic stepped type moving all rounds Each 223.00 138 30774.00

162 PWD ELECT 2020 5.4.22 Batten/ angle holder Each 41.00 91 3731.00

163 PWD ELECT 2020 5.4.2 Blanking plate Each 28.00 286 8008.00

164 PWD ELECT 2020 5.6 Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3 Nos 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as per specification. Each 816.00 74 60384.00

165 PWD ELECT 2020 5.7 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as per specification. 5.7.2 Deluxe Each 107.00 3 321.00

166 PWD ELECT 2020 5.9 Providing and fixing round/ hexagonal fan box (125mm dia) depth 75mm (max.) with 12mm dia steel bar hook, 1.6mm thick MS sheet cover, in RCC slab etc. as per specification. Each 42.00 68 2856.00

167 PWD ELECT 2020 5.10 Providing and fixing fan hook made of 12mm dia steel bar in existing ceiling slab including cutting of roof, fixing hook above reinforcement on both side, repairing with cement mortar 1:2 (1 cement : 2 sand) etc. as per specification. Each 109.00 70 7630.00

168 PWD ELECT 2020 6.1 Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments. 6.1.3 1200 mm sweep Each 1697.00 138 234186.00

169 PWD ELECT 2020 6.6 Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 6.6.1 300 mm sweep Each 2446.00 17 41582.00

170 PWD ELECT 2020 6.6.2 380 mm sweep Each 2858.00 5 14290.00

171 PWD ELECT 2020 6.11 Supplying and fixing following sizes of down rod of 15/20mm dia M.S. pipe of thickness 2 mm to ceiling fan including painting with matching colour etc. as per specification. 6.11.2 60 cm long Each 40.00 135 5400.00

172 PWD ELECT 2020 6.12 Providing and fixing phenolic laminated sheet cover of 180 mm dia 3 mm thick on the fan box etc. as per specification. (If provided at the time of installation of ceiling fan) Each 56.00 138 7728.00

173 PWD ELECT 2020 6.15 Supplying, installation, testing and commissioning of following LED fitting (luminaries) Panel Light in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.15.6 18/20 Watt Each 868.00 6 5208.00

174 PWD ELECT 2020 6.17 Supplying, fixing, testing and commissioning of following LED lamps with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.17.5 12 Watt Each 215.00 4 860.00

175 PWD ELECT 2020 6.19 Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.19.3 18/20 watt {4 feet} Each 443.00 208 92144.00

176 PWD ELECT 2020 6.20 Supplying, fixing, testing and commissioning of following LED lamps {Inverter Type: with builtin battery backup} with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as per specification and P.F. should be greater than 0.9.LED chip efficacy ratio ≥ 100 lumens /watt. 6.20.2 12 Watt Each 546.00 87 47502.00

177 PWD ELECT 2020 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 6.28.6 45 watt Each 2729.00 18 49122.00

178 PWD ELECT 2020 6.50 Providing and fixing wooden board of suitable size (18''x 24'') for energy meter etc complete as per specification. Each 123.00 3 369.00

179 PWD ELECT 2020 7.9 Providing and fixing metal clad, SP&N switch fuse unit (re-wirable), 230/250 volts, with porcelain re-wireble fuses including drilling holes on the board, connections, earthing the body etc. as per specification. (Thimbeling shall be paid separately). 7.9.1 32 amps Each 978.00 1 978.00

180 PWD ELECT 2020 7.10 Providing and fixing metal clad, TP&N switch fuse unit (re-wirable), 415/500 volts, with porcelain re-wireble fuses including drilling holes on the board, connections, earthing the body etc. as per specification. (Thimbeling shall be paid separately). 7.10.2 63 amps Each 1915.00 1 1915.00

182 PWD ELECT 2020 7.11 Providing and fixing porcelain re-wireble fuse carrier and base unit on wooden board including drilling holes on the board, screws, connections etc. as per specification. (Thimbeling shall be paid separately). 7.11.6 300 amps Each 797.00 3 2391.00

183 PWD ELECT 2020 7.16 Providing and making interconnection in cubical panel between BBC and switchgears with following size aluminium strip of length upto 50cm as per specification (To be measured separately for each phase/ neutral). 7.16.3 50x5mm (300 amps) Each 155.00 4 620.00

185 PWD ELECT 2020 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. 7.19.1 Upto 300 mm deep sqm 6818.00 6 40908.00

186 PWD ELECT 2020 7.20 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) aluminium bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification. 7.20.3 300 amp (50x5mm) Metre 1336.00 3 4008.00

187 PWD ELECT 2020 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu. 9.1.1 3 pole MCCB, 25-63A, Fixed Thermal Release, 10KA Each 1483.00 2 2966.00

188 PWD ELECT 2020 9.1.4 3 pole MCCB, 100A, Adjustable Thermal - Magnetic Release, 25KA Each 3734.00 8 29872.00

189 PWD ELECT 2020 9.1.11 3 pole MCCB, 320A, Adjustable Thermal - Magnetic Release, 35KA Each 13933.00 1 13933.00

190 PWD ELECT 2020 9.3 Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board consumer unit of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) 9.3.3 2 + 12 way Each 947.00 1 947.00

191 PWD ELECT 2020 9.5 Supplying and fixing on surface/ recess vertical type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, with 200 amps tinned copper busbar, common neutral link, earth bar, din bar, detachable gland/ knock out plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 9.5.4 4 way (4 + 12), Double door Each 4149.00 2 8298.00

192 PWD ELECT 2020 9.5.5 8 way (4 + 24), Double door Each 5138.00 8 41104.00

193 PWD ELECT 2020 9.11 Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.11.2 6 amps to 32 amps Each 148.00 225 33300.00

194 PWD ELECT 2020 9.12 Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.12.3 40 amps Each 645.00 1 645.00

195 PWD ELECT 2020 9.14 Supplying and fixing TP MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.14.3 40 amps Each 994.00 2 1988.00

197 PWD ELECT 2020 10.6 Providing and fixing metal clad, 4 pole, on load change over switch unit (without sheet steel enclosure), 415/500 volts, in cubicle panel including drilling holes on the board, connections, earthing the body, testing and commissioning etc. as per specification. (Connecting lead if required shall be paid separately) 10.6.4 315 amps Each 14411.00 1 14411.00

198 PWD ELECT 2020 10.11 Providing and fixing following rating motor starter on metal board including, connections, testing and commissioning etc. as per specification. 10.11.2 DOL three phase 16 amps Each 1314.00 1 1314.00

199 PWD ELECT 2020 10.12 Providing and fixing 2 pole, 230/250 volts following rating power contactor in existing starter/ cubical panel including, connections, testing and commissioning etc. as per specification. 10.12.2 32 amps Each 526.00 1 526.00

200 PWD ELECT 2020 10.15 Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.15.2 100/5 amps Each 349.00 3 1047.00

202 PWD ELECT 2020 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. Each 94.00 9 846.00

203 PWD ELECT 2020 10.19 Providing and fixing penal mounting digital type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification Each 975.00 3 2925.00

204 PWD ELECT 2020 10.20 Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.20.2 Digital type Each 835.00 3 2505.00

205 PWD ELECT 2020 10.21 Providing and fixing penal mounting selector switch in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.21.1 For voltmeter Each 189.00 3 567.00

206 PWD ELECT 2020 10.21.2 For ammeter Each 207.00 3 621.00

207 PWD ELECT 2020 10.22 Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as per specification. 10.22.1 Digital type Each 1901.00 3 5703.00

208 PWD ELECT 2020 12.3 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 6209.00 13 80717.00

209 PWD ELECT 2020 12.4 Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification. Metre 77.00 345 26565.00

210 PWD ELECT 2020 12.17 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as per specification. Metre 38.00 124.0 4712.00

211 PWD ELECT 2020 12.19 Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification: 12.19.1 With 3 metre long GI Pipes and 50 kg back filling compound. Each 10955.00 4 43820.00

212 PWD ELECT 2020 13.1 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate having 4 nos holes for fixing etc. complete as per specification. Each 767.00 1 767.00

213 PWD ELECT 2020 13.6 Providing and laying copper tape 32 mm X 6 mm from earth electrode directly in ground as per specification. Metre 654.00 156.0 102024.00

214 PWD ELECT 2020 14.5 Supplying and fixing G.I. pipe along with wall or pole/ support with 2 Nos MS clamps for protection of under ground cable in approved manner including bolts and nuts or metal dash fasteners complete as per specification. 14.5. 1 32 mm dia Metre 295.00 25.0 7375.00

215 PWD ELECT 2020 15.4 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing masonry open duct as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.4.15 3.5 x 95 sq. mm. Metre 287.00 80 22960.00

216 PWD ELECT 2020 15.6 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 25x3 mm M.S flat clamp and steel dash fastener/ G.I. bolts and nuts as per specification , IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.6.3 3.5 x 95 sq. mm. 3.5 x 95 sq. mm. Metre 384.00 20 7680.00

217 PWD ELECT 2020 15.11 Supplying and hanging following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.11.3 2 x 10 sq. mm. on 8 SWG GI bearer wire Metre 103.00 48 4944.00

218 PWD ELECT 2020 15.23 Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. 15.23.16 3½ X 95 sq. mm (38 mm) Each 256.00 16 4096.00

219 PWD ELECT 2020 14.2 Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 63 14.2.1 mm outer dia Metre 124.00 100 12400.00

220 PWD ELECT 2020 26.17 Supply and erecting of following ISI marked Fire extenguishers on wall/ column including erecting bracket etc complete. 26.17.5 CO2 type Fire Extinguisher ISI marked confirming to IS:15683:2018 Capacity 4.5Kg. INITIAL CHARGE:- Carbon dioxide used in extinguishers shall comply with IS 15222. FIRE RATING:- 55B. Complete with Hose Assembly and horn , locking arrangement, operation manual, bracket with two screw and sleeve Each 8222.00 4 32888

221 PWD ELECT 2020 30.1 Earth work in all type soil except soft rock / hard rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling of excavated soil in trench / pit to ground level complete as per specification. cum 168.00 6 1008.00

222 PWD ELECT 2020 23.3 Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010). Note: submersible Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. 23.3.4 3.0 HP, three phase Each 22714.00 1 22714.00

223 PWD ELECT 2020 23.6 Supplying and fixing following dia HDPE pipe PE-80 Grade (8kg/sqcm) in single length in the suction/ delivery line of water supply pump etc. as per specification. 23.6.1 32 mm outer dia Metre 55.00 105 5775.00

224 PWD ELECT 2020 23.11 Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set Each 4030.00 1 4030.00

225 PWD ELECT 2020 23.12 Supplying and fixing M.S. clamp 50 cm long made of 50mmx5mm thick M.S. Flat for holding the pipes and submerable pump set as per specification. Metre 291.00 1 291.00

226 PWD ELECT 2020 23.13 Supplying and fixing 300 mm dia 2 mm thick M.S. sheet cover with 3 cm edge in two past on tube well bore pipe as per specification Each 388.00 1 388.00

227 PWD ELECT 2020 23.16 Supplying and laying of approved make stainless steel wire rope of 6 mm dia for support of submersible pump set complete with tying to pump set and pump holding clamp. Metre 16.00 110 1760.00

228 PWD ELECT 2020 23.14 Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS: 694 (2010).Note: Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. 23.14.3 3x4.0 sqmm Metre 90.00 225 20250.00

Say Rs 365.04 lacs

Sub Engineer S.D.O. P.W.D. Sub Division Patan Executive Engineer P.W.D. Durg Division Durg

Department Name Code SOR Name SOR UOM Name UOM Code false6329

Bastar Urban Public Transport Society (BSTUPTS) BSTUPTS ELECTRIC ELECT Percentage %

Bilaspur Urban Public Transport Society (BSPUPTS) BSPUPTS NON SOR NS Per mile %O

Chhattisgarh Department of Agriculture (CGDA) CGDA BRIDGE PWD_BRIDGE 1000 no. 1000 no.

Chhattisgarh Handicraft Board (CGHCB) CGHCB PWD BUILDLING PWD BLD 1000No. 1000No.

Chhattisgarh High Court, Bilaspur (CGHC) CGHC PWD ROAD PWD ROAD Siemens Per meter A/V

Chhattisgarh Housing Board (CGHB) CGHB Acre ACR

Chhattisgarh Infotech Promotion Society (CHiPS) CHiPS Activity unit AU

Chhattisgarh Medical Services Corporation Ltd. (CGMSC) CGMSC Bag BAG

Chhattisgarh Police Housing Corporation Ltd (CGPHC) CGPHC Book BK

Chhattisgarh Rajya Beej Evam Krishi Vikas Nigam (CGRBEKVN) CGRBEKVN Box BOX

Chhattisgarh State Civil Supplies Corp. Limited (SCSC) SCSC Gallons per hour (US) BPH

Chhattisgarh State Industrial Development Corporation (CSIDC) CSIDC Bottle BT

Chhattisgarh State Mandi Board (CGSMB) CGSMB Cubic sentimeter /second C3S

Chhattisgarh State Minor Forest Produce(Trading & Developme) Co-Operative Federation Ltd (CGMFPFED) CGMFPFED Canister CAN

Chhattisgarh State Power Distribution Company Limited (CGSPDCL) CGSPDCL Carton CAR

Chhattisgarh State Power Generation Company Limited (CGSPGCL) CGSPGCL Cubic Centimeter CCM

Chhattisgarh State Power Transmission Company Limited (CGSPTCL) CGSPTCL Cubic decimeter CD3

Chhattisgarh State Warehousing Corporation (CGSWC) CGSWC Centiliter CL

Chhattisgarh Text Book Corporation (CGTBC) CGTBC cm cm

Department of Animal Husbandry and Dairy (DAHD) DAHD Centimeter CM

Department of Home Guard and Civil Defence Chhattisgarh (HGCD) HGCD Square centimeter CM2

Department of Panchayat and Social Welfare (DPSW) DPSW Crate CRT

Department of School Education (DSE) DSE Case CS

Department of Technical Education (DTE) DTE Cu.Mtr. Cu.Mtr.

Directorate of Fisheries (DF) DF cum cum

Durg-Bhilai Urban Public Transport Society (DBUPTS) DBUPTS cum.km cum.km

Food and Drug Administration (FDA) FDA Days DAY

Health Department (HD) HD Degree DEG

Indira Gandhi Krishi Vishwavidyalaya (IGKV) IGKV DFLT DFLT

Korba Urban Public Transport Society (KRBAUPTS) KRBAUPTS Decimeter DM

Koriya Urban Public Transport Society (KRYAUPTS) KRYAUPTS Drum DR

Mineral Resources Department (MRD) MRD Dozen DZ

Naya Raipur Development Authority (NRDA) NRDA EACH EA

Panchayat and Rural Development (PARD) PARD each each

Public Health Engineering Department (PHED) PHED each additional floor each additional floor

Public Works Department (PWD) PWD each cut each cut

Raigarh Urban Public Transport Society (RIGUPTS) RIGUPTS each test each test

Raipur Collectorate (RC) RC each tree guard each tree guard

Raipur Development Authority (RDA) RDA each tree guard each tree guard

Raipur Urban Public Transport Society (RUPTS) RUPTS Enzyme Units / Milliliter EML

Rajnandgaon Urban Public Transport Society (RNDGUPTS) RNDGUPTS Enzyme Units EU

Rural Engineering Services (RES) RES Fluid Ounce US FOZ

Sarguja Urban Public Transport Society (SUPTS) SUPTS Feet FT

State Urban Development Agency (SUDA) SUDA Square foot FT2

Urban Administration and Development Department (UADD) UADD Cubic foot FT3

Water Resources Department (WRD) WRD Gigajoule FY

gram act.ingrd /liter G/L

Gram act.ingrd. GI

Gram /liter GLI

Gram /square meter GM2

Gram/Cubic meter GM3

Gallons per mile (US) GPM

hectare hectare

Joule /kilogram JKG

Kilogram act.ingrd KAI

Kilogram /cubic decimeter KD3

Kilogram/Mol KGM

Kilogram /Second KGS

Kilogram / cubic meter KGV

kg act.ingrd /kg KIK

Kilojoule/kilogram KJK

Kilojoule/Mol KJM

Square kilometer KM2

Kilometer/hour KMH

Kelvin/Minute KMN

Kelvin /Second KMS

Kilonewton per square meter KNM

Kilovoltampere KVA

Liter per 100 km LHK

Liter /Minute LMI

Liter /Molsecond LMS

Liter Per hour LPH

1/square meter M-2

Mol per cubic meter M:M

Megawatt hours M..

Meter /Hour M/H

Mol per liter M/L

Meter /second M/S

Square meter M2

Square meter/Coat M2C

Square meter/second M2S

Cubic meter /Hour M3H

Cubic meter/second M3S

Milligram/liter MGL

Milligram /cubic meter MGQ

Square mile MI2

Microsecond MIS

Milliliter act.ingr. MLI

Square millimeter MM2

Cubic millimeter MM3

Millinewton/meter MNM

Miles per gallon (UG) MPG

Millimol per liter MPL

Millipascal seconds MPS

Meter/second squared MS2

Microsiemens per centimeter MSC

Newton/meter NM

Newton/Square millimeter NMM

one RCC jaali tree guard one RCC jaali tree guard

one RCC jaali tree guard one RCC jaali tree guard

P.cumt. P.cumt.

P.Point P.Point

p.sq.mtr p.sq.mtr

P/sq.Mt. P/sq.Mt.

Pascal second PAS

Megavoltampere PCT

per cm height per letter per cm height per letter

per cm height per letter per cm height per letter

per cubic centimeter per cubic centimeter

Per Km. Per Km.

per letter per letter

Per mtr Per mtr

per pouch per pouch

per test per test

per tonne per tonne

per tonne capacity per tonne capacity

per.mtr per.mtr

Parts per billion PPB

Parts per million PPM

Parts per trillion PPT

Number of persons PRS

Pound Per Sq inch PSI

Pint, US liquid PT

Per Ton Per KM PTPK

Quart, US liquid QT

quintal quintal

Gramm/cubic centimeter RHO

RUNNING METRE RMT

Thousand Hours THR

Ton/Cubic meter TOM

DEFAULT UNIT DESCRIPTION XXX

Square Yard YD2

Microgram /liter µGL

Microgram /cubic meter µGQ