MMNPPNA_24_25_06 Strenghening of PGHJ Road ( Synod Rotary to Sumo Stand) ( CH 124.00km to Ch 126.5 km) under Mukhya Mantrir Nagariya Pakipath Nirman Achani (MMNPPNA) for the year 2024-25, Haflong MB

Amount

Removal of unsuitable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Spec

Water Bound Macadam Sub-base/base(Only for PMGSY work) (3)WBM Grading 3 ; Using stone screening Type-B 11.2 mm for Gr.III Providing, laying, spreading and compacting stone aggrega

Prime Coat (iii) High Porosity : Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 1.2-1.5 kg/sqm using mechanical means as per Techn

Tack Coat (iii)Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specific

Bituminous Concrete : Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix

Exacavation for structures Earthwork in excavation for structures as per drawing and technical specification Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead

Brick Soling Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering a

Sand Filling in Foundation Trenches as per drawing & Technical Specification.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203(A)With crushed Stone (I)PCC GrM-10

Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (A)With Crushed Stone (III)RCC Gr M-20(i)For height upto 5 m

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204(A)With Crushed Stone(II)P.C.C. grade M 20 (ii)Nominal mix 1:2:4 (Hand mixed)

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing

Plastering with Cement Mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification clauses 613.4 & 1204.

Road Marking with hot applied thermoplastic compound with reflectorising glass beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2

Road Markers/Road Stud with Lens Reflector : Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 3

Direction and Place Identification signs with size more than 0.9 sqm size board : Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fix

Traffic Signs :(A)Retro-reflectorised Traffic Signs (II)Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium shee

Providing,fitting & fixing in position Ornamental Iron Grill complete as per drawing & Technical Specification & as directed by the Department..

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard ,jointed with neat cement slurry mixed with pigment to match the shade of tiles,including rubbing & cleaning etc. complete,on 20 mm thick bed of cement mortar 1:4(1 cement : 4 co

Sypplying & installation of antique design Street Light for Gaurab Path through both sides of the road with underground cabling.

RSM INFRA PROJECTS (BID ID -250502)

Arban Joel Kachari (BID ID -250459)