Establishment of Circle level central NOC at Room no 216 Pan bazar T E building Guwahati

Amount

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge

Anodized (AC 15 ) aluminium

Providing and placing Godrej 8 seater Penta work station WISH panel & Tile based modular work stationwith partition thickness as 52.4mm thick and height of 1200.00 mm including powder coated aluminium trims,The Tiles combination of top tiles are fabric tacktable tile,Bottom tiles Palin metal INTERMEDIATE BLOCKS are given in DL +DL finish The WIRE Management shall be taken into the system through cable ducts from the juction boxes and it is carried upto the panels through concealed conduicts inside the blocks.Legs shall be of powder coated at the end and shared condition,system shall also have 120 mm highpowder coated standalone panel legs to give the system an elevated look, WORK SURFACE :- For work surface out of 25 mm thick prelam particle board with flat PVC lipping edge binding of size 1500 mm x1200 mm x 600 mm depth (a)PEDESTRAL

WITH LEGS :-Nova pedestral flat metal front ,full height free standing central locking of size 390 mm width x 435 mm Depth x646 mm height 3(three) drawer { Two box + one File} (b) CPU Trolley :--With castors.[c] KBPT with mousetrray :-Metal Note :- All partitions and side panels have levelling screws for adjustment in case of uneven floor to take care of +/*40 mm of uneven flooring.

8 seater moduar Penta workstation with CPU trolley & Top support pedestral (1500x1200x600 )mm

Supplying/ providing and assembling revolving mesh back chairs "OXBO" of o Mid back Model of Godrej or equivalent of approved colour of width 76.3 cm(W) X 76.3 cm(D) X 89.50 mm-100.50 mm(H) with seat height 43.30cm-54.50cm, thick cushion seat and mid back,with unique tubular frame back feels designer -made and the mesh uplostery complete slim revolving chair having wide loop armrests etc. complete as per the direction of Engineer-in-charge.

Providing and fixing superior sunfilm to Glass partion of interior quality of Garware or equivalent Make of approved colour and thickness as per direction of engineer in charge .

Repairing and leveling of false flooring by fixing of 1.00 mm G S sheet over the cuts in tiles,laying of 3mm Foam sheet with proper adhesive and fixing 9 mm ncommercial ply to make the floor monolithic all complete as per direction of engineer incharge.

Repair to the false roof as per the requirement of the ceiling light by cutting the frame /tile or replacing it with the new tile if available from adjacent rooms all complete ( all works including cutting TEE,Angle,Tiles of False ceiling frame work etc included in this item)

Providing and fixing homogeneous Polyvinyl chloride sheet flooring in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer like Dunlop S-758 , Fevicol SR 998 or equivalent including rolling with light wooden roller weighing about 5 Kg. all complete as directed by Engineer-In-Charge, in approved colour and shade

1.5mm thick

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.