PETTY REPAIRS WORKS IN ZONE B OF DRDO TOWNSHIP UNDER AGE B/R-II, KANCHANBAGH

Amount

Attending day to day complaint related to carpenter works like door easing, door repair, kitchen cup board repair, wire mesh/glass pane, replacement of window/door, replacement of hardware items/mirror/glass shelf etc.by deploying carpenter and mazdoor.

Attending day to day complaint related to plumbing works like repair to leakages of bib taps/stop cocks/gate valves/pillar cocks and like, repair/replacement of CI joints /sanitary fittings/plumbing fittings etc by deploying plumber and mazdoor.

Attending day to day complaint related to cement works like repair to floors/ wall plaster in patches etc area n.exc 0.50Sqm each complaint by deploying mason and mazdoor.

Attending day to day complaint related to any type of welding works like welding to steel frame works/ hinges/ glazing bars etc. by deploying welder and mazdoor.

Notes for Ser item Nos 1 to 4 :-The quoted rate of contractor shall comprise the following :- i) Contractor shall provide sufficient skilled and unskilled manpower on requirnment basis as directed by Engineer in charge for attending and completing the complaints as per the users satisfaction. However, the number of skilled and unskilled manpower shall be increased as directed by Engineer in charge depending upon the requirements/ number of complaints registered at the complaint center. In case of failure on providing sufficiet manpower by the contractor, a penalty at the rate of Rs 1000 per skilled person per day and Rs 600 per unskilled person per day shall be levied on the contractor and recovery for the same shall be affected from contractor's dues. A separate register shall be maintained by the contractor for recording the absentee details and shall be signed by both the contractor or his authorised rep and Engr-in-charge.

(ii) Complaint cell for receiving complaints from users shall be opened by the contractor from 09.00 am to 5.00 pm at MES service centre of DRDO township kanchanbagh in AOR of AGE B/R-II under GE (I) R&D Kanchanbagh. The complaints related to carpenter works, plumbing works, cement works and welding works against serial item Nos 1 to 4 shall be completed within 72 hours time, however urgent and unavoidable nature of complaints as directed by Engr-in-Charge like no water supply etc shall be completed within 24 hours time after lodging/ receipt of complaints. Contractor shall ensure that all the complaints shall be attended and completed within above prescribed schedule/ time period, failing which, a penalty at the rate of double the quoted rate for that particular trade work/cmplaint per day till the satisfactorily completion of complaint shall be levied on the contractor and recovery for the same shall be affected from contractor's dues. A separate register shall be maintained for recording the same and shall be signed by both the contractor or his authorised rep and Engr-in-charge.

(iii) : For each complaint a separate docket slip shall be prepared by the contractor/ his representative and handed over to related tradesman, etc. for attending the complaint and after satisfactorily completion of complaint, docket duly signed by user shall be submitted to concerned executive on the date of register of complaint, and shall be produced at the time of payment to be made to the contractor. Complaints pertaining to same location and same nature consisting of replacement of maximum two fixtures in one quarter/ office/ building etc.involving movement of particular tradesman shall be measured and paid as one complaint. Replacement of more than two fixtures but multiple of three fixtures or part thereof in one quarter/ office/ building, etc. shall be measured as additional complaint.

(iv) : Format of docket slip and complaint register which shall be kept in complaint cell are attached as per Appendix 'E' and Appendix 'F' of tender documents. The cost of docket slips and complaint registers etc. shall be borne by the contractor and cost thereof shall be deemed to be included in quoted rates by the contractor against respective items of schedule 'A'. The complaint slip shall be prepared by the contractor or his authorised rep and handed over to the tradesmen and necessary entry shall be made in the complaint register and will be handed over to to concerned JE / the Engr-in-Charge next day. Contractor shall maint seprate register for lodging the complaints and the same shall be produced to concerned JE / Engr-in-Charge on next day.

(v) : Necessary transportations, tools, plants, ladders, etc. including nails, screws, PVC washers for bib taps/ stop cocks/ pillar cocks, cotton thread, Jumper valves, white lead, flush washers, rawel plugs and other similar minor accessories ( except items mentioned against Srl item Nos 5 to 82 here in after ) required to complete the jobs/complaints shall be provided by the contractor without any extra cost to the department and cost thereof shall deemed to be included in quoted rates by the contractor against respective item of schedule 'A'. Note : work shall be carried upto G+05 storey building

(vi) : In case of welding to steel items required to rectify/ complete the complaints, the welding set and welding rods shall be provided by the contractor without any extra cost to the department and cost thereof shall deemed to be included in qouted rate of contractor against respective item of schedule 'A'. (vii) : Materials mentioned against serial item Nos 5 to 82 hereinafter required for execution of complaints shall be supplied by the contractor and paid separately under respective items of schedule 'A' as supply only.

Supply only Brass spindle suitable for 15mm dia CP tap/CP stop cock (short body/ long body)/CP pillar cock/concealed stop cock/Brass bib tap.

Supply only PVC waste pipe 32mm dia plain (Make : Prayag, Symet) of standard length/size suitable for WHB and steel sink.

Supply only PVC waste pipe 40mm dia plain (Make : Prayag, Symet) of standard length/size suitable for Urinal and steel sink.

Supply only CP waste coupling, 32mm dia bore (Make: Prayag, Prima, Jainko, Parko) suitable for wash basin and steel sink .

Supply only CP waste coupling, 40mm dia bore (Make: Paryag, Prima, Jainko, Parko) suitable for wash basin and steel sink .

Supply only PVC syphon kit for PVC low level flushing cistern ((Make Prayag, commander, Parryware, Supreme ) with syphon, handle lever etc complete kit.

Supply only PTMT standard bib tap 15mm bore dia, any colours, screwed for iron pipe . (Minimum weight 90gms).

Supply only Stop cock high pressure of PTMT of size 15mm bore any colour, (minimum weight 90gm) make Prayag, Symet.

Supply only PVC seat cover white in colour closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device (for EWC / Anglo Indian type WC).

Supply only CP towel rail 60cm long with brass screw and cleats Make Prayag, Symet.

Supply only CP waste coupling, 100mm dia bore suitable for kitchen sink (Make: Prayag, Prima, Jainko, Parko) suitable for steel sink .

Supply only M-seal in 100 grams packet.

Supply only PVC connections 15mm size with PTMT nuts of length 450mm

Supply only PVC connections 15mm size with PTMT nuts of length 600mm

Supply only 15 mm bore, Medium grade', galvanised tube in short lengths.

Supply only 20 mm bore, Medium grade', galvanised tube in short lengths.

Supply only 25mm bore, Medium grade', galvanised tube in short lengths.

Supply only 15mm dia GI fittings ( nipples, elbows, reducers, Tee, sockets, unions and tank nipples etc )

Supply only 20mm dia GI fittings ( nipples, elbows, reducers, Tee, sockets, unions and tank nipples etc ) complete all as directed.

Supply only health faucet CP brass for 15 mm dia pipe with 1.25 metre long flexible tube and wall hook

Supply only two way CP brass Bib taps 15mm dia with capstan head and flange

Supply only 15mm dia CP cast copper alloy pillar taps, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts.

Supply only 15mm dia angle cock fancy type, cast copper alloy, chromium plated screwed down high pressure with crown or capstan head.

Supply only 15mm dia stop cock fancy type (Consealed type), cast copper alloy, chromium plated screwed down high pressure with crown or capstan head.

Supply only CP brass Bib taps 15mm dia fancy type with capstan head and flange

Supply only 32 mm dia PVC flush pipe suitable for low level PVC flushing cistern.

Supply only 10 ltrs capacity PVC flushing cistern low level with inlet, ball valve, float, handle.

Supply only PVC water tank cover of any size and capacity.

Supply only CP brass shower rose with swivel joints 125mm dia with 18mm dia chromium plated pipe.

Supply only Vitreous china wash hand basin , white, flat back, of size 550x450mm.

Supply only stainless steel sink of 1.0mm thick for kitchen with drain board of overall size 1143x510mm and bowl size of 510x405mmx203mm including plugs, washers, bedding in cement mortar on to dwarft wall or cantilever brackets and connecting union to pipe complete all as directed.

Supply only stainless steel grating of size 100 mm with or without hole

Supply only brass CP wall mixture three-in-one (3-in-1) system with provision of telephonic shower

Supply only 15mm dia swan neck taps cast copper alloy chromium plated with crown or capstan head

Supply only gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, suitable for 20mm bore

Supply only 20mm dia ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210gms)

Supply only vitreous china squatting pan "orissa" pattern of size 580x440mm white with integral foot rest

Supply only vitreous china wash down water closet pan (pedestal pattern) (EWC)

Supply only 40 mm low density polyethylene pipes (LDPE) of pressure rating 6 Kg per Sqcm

Supply only Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40mm

Supply only blue teak/tinned tacks

Supply only Pozzolana portland Cement (PPC), in 50 Kg bag.

Supply only White cement, ISI marked, in 1 Kg packing

Supply only Fine sand (River sand)

Supply only Integral water profing compound

Supply only 12.5 mm graded stone aggregate

Supply only Mild steel butt hinges medium weight,cold rolled, ISI marked, 100mm long .

Supply only mild steel sliding door bolt, 250 mm long, ISI marked, with hasp, staple (bolt type) bolt not less than 16mm dia including bolts and nuts

Supply only Aluminium alloy, anodised, sliding door bolt, 300 mm long, ISI marked, with hasp, staple (bolt type) bolt not less than 16mm dia including bolts and nuts

Supply only Aluminum anodized, barrel tower bolts of extruded section 200mm long, ISI marked

Supply only Aluminum anodized, barrel tower bolts of extruded section 150mm long, ISI marked

Supply only Aluminum handles, fabricated type, anodized 100mm long, ISI marked.

Supply only Aluminum handles, fabricated type, anodized 150 mm long, ISI marked.

Supply only floor door stopper 150 mm size of aluminium alloy body and anodized.

Supply only continuous (piano) hinge, mild steel, bright finish, ISI marked, (width of flap 40mm when open) .

Supply only glass 3mm thick plain of size as per site requirement.

Supply only glass 3mm thick pin head/figured of size as per site requirement.

Supply only glass 4 mm thick plain of size as per site requirement.

Supply only oil putty.

Supply only door bottom seal 92 cm long with aluminium plate and black rubber at bottom for covering gaps between door and floor.

Supply only 18/19 mm thick pre-laminated particle board laminated both sides, exterior grade, ISI marked.

Supply only 9 mm thick Plywood grade BWR, type BB ISI marked.

Supply only 12 mm thick Plywood grade BWR, type BB ISI marked.

Supply only 19mm dia , fancy type, powder coated mild steel drapery rod, best quality.

Supply only powder coated mild steel brackets for fixing 19 mm dia drapery rods best quality.

Supply only stainless steel plate rack of size 910x 750x 300mm of weight not less than 7 Kg each

Supply only Mild steel helical door spring, 200 mm long.

Supply only single action spring hinges mild steel with steel wire springs stove enameled black 125mm long.

Supply only MS handles of sides (L/R) stove enamelled black suitable for glazed steel window/ventilator.

Supply only Casement stays, size 250 mm, with hinged joint and two plates, with studs complete

Supply only Ball catches with 8mm dia steel ball, and brass body and striking plate

Supply only Hasp and staple 100 mm size, mild steel, safety type, stove enamelled black, including bolt to hinge plate.

Supply only stainless steel peg set of 06 hooks complete all as directed

Supply only 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, of size exc 6 Sqcm and nexc 10 Sqcm in cross section

Note :- Materials supplied against item no 5 to 79 by the contractor shall be deposited first in store yard of AGE B/R -II and same shall be issued by the department to the contractor/his authorised rep on daily basis as per nature of complaint and as required at site. A register shall be maintained by the contractor or his authorised rep for the stores / materials supplied by the contractor to the department and then issued by the department to the contractor on daily basis. The register shall be kept in the custody of concerned JE and shall be produced to GE office at the time of making payment of RARs/ final bill to the contractor.

Cleaning and removing all scale and dirt etc from water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs from mouths of circulating pipes etc complete and writing date of cleaning by synthetic enamel paint on all tank, after cleaning, size of letters shall be 50mm in height and text shall be “TANK CLEANED ON DD/MM/YYY” complete all as specified.

Repair of stuck MS windows and ventilators by removing deposits, rust and applying greese / oil to make shutters and handles functional including welding new box hinges complete all as directed.

Complete removal of trees/plants, upto roots growth on bldg's roofs, chajjas, at junctions of pipe line fixed on walls and walls coming on bldgs and removing the material (Branches and plants ) to outside MOD land complete all as directed Note : Work to be carried out up to 06 storey building.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including demolition of old brick work complete all as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:6 finished even & smooth without using extra cement

M&L for rendering 10 mm thick on fair faces of brick or concrete surfaces on ceiling in CM 1:3 finished even & smooth without using extra cement

M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash on ceilings complete all as directed.

M&L preparation of new plastered surface and applying two coats of cement base paint over a coat of primer on walls all as specified and as directed at site.

M&L Preparation of new plastered surfaces of wall and applying two coat oil bound distemper over a coat of primer over one mm thick wall care putty (of Birla make) smooth finished over a coat of alkali resistant primer, complete all as directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) first quality area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 20 mm thick screed bed in cement mortar 1:6 including dismantling existing tiles with screed bed complete all as directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) first quality area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 20 mm thick screed bed in cement mortar 1:6 including dismantling existing tiles with screed bed complete all as directed.

M&L for glazed ceramic tiles of size 300x450x7 mm thick vertical surfaces such as skirting/dado jointed in neat cement slurry and pointed with white or coloured cement to match the colour of the tiles laid on and including 10mm thick rendering in cement mortar 1:4 including dismantling of existing tiles along with a backing coat complete all as directed.

M&L for Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting,rounding edges and polishing laid on and including 15mm thick screed bed in cement mortar 1:6 including taking down existing stone slab/ tile complete all as directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including cutting,rounding edges and polishing laid on and including 15mm thick screed bed in cement mortar 1:6 including taking down existing stone slab/ tile complete all as directed.

Supply & fixing of UPVC ventilators with top hung glazed and wire mesh shutters made out of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutter fixed with 3 mm thick frosted glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent complete incl taking down old down old ventilator complete all as specified all as directed.

Supply & fixing of UPVC windows three track sliding window with two glazed and one wire mesh sliding shutters of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent complete incl taking down old down old window complete all as specified. all as directed .

M&L for 40mm thick plain cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate), as in floors finished even & smooth with out using extra cement complete all as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level) complete all as specified and directed

M&L for 75mm thick plain cement concrete1:3:6, type C1 (using 20mm graded stone aggregate) as in plinth protection including providing 10mm thick joints filled with bituminous & sand mixture (1:7) at not exc 3.00 mt intervals & at corners and finished even and smooth without using extra cement complete all as directed.

M&L PU coated machine pressed cement concrete tiles 30cm x 30cm x20 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 15 mm thick screed or bedding layer in CM 1:6, including dismantling existing floor tile of any descrption complete all as directed. Make : NAVEEN/SPARTEK/NITCO

M&L for white rotational moulded triple layered polythene water storage tank (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs including dismantling existing damaged PVC tank complete all as directed.

M&L for white rotational moulded triple layered polythene water storage tank (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs including dismantling existing damaged PVC tank complete all as directed.

Dismantling of existing AC/PVC soil and waste pipe 75/100 mm dia including fittings,viz, bends , tee from walls/ floor complete

M & L for PVC (SWR) plain Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S & F 110 mm bore PVC (SWR) Soil,rain water, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete

S & F 110 mm bore PVC (SWR) Vent Cowl complete .

S & F 75 mm bore PVC (SWR) bends of any radius complete

S & F 110 mm bore PVC (SWR) bends of any radius complete.

S&F PVC (SWR) pipes,150 bore of pipe as in spouts/rain water pipes, single socketed, in any length with rubber ring joints, fixed in position including making necessary holes in walls or parapet and making good with cement mortar 1:4 and taking down old rain water pipe of any description and in any position complete all as specified and directed.

S&F in repairs 150mm PVC (SWR) bends any radius complete all as directed

S & F repair corner glass shelf with bracket of size 300mm wide with SS railing complete all as specified and directed

Supply and fix in repairs Godrej Mortice lock complete set 7 levers with handles and two keys

Taking down the cover of existing rolling shutters of gear/manual operated type (area of shutter exceeding n exceeding 11 Sqm carefully and complete overhauling the shutters by applying grease, oil etc in bearings springs guide channels, operating rod etc for smooth and free operation and refixing the cover back in position, complete all as directed by Engineer-in-Charge.

Replacement of tension spring in the shaft of rolling shutters suitable to the rolling shutter and making good the disturbed surfaces to match to the existing for gear operated type rolling shutter complete all as directed by Engineer-in-Charge.

Replacement of ball bearing in the shaft of rolling shutter complete all as directed by Engineer-in-Charge.

Taking down the cover of existing rolling shutters of gear/manual operated type (area of shutter exceeding n exceeding 11 Sqm carefully and complete overhauling the shutters by applying grease, oil etc in bearings springs guide channels, operating rod etc for smooth and free operation and refixing the cover back in position, complete all as directed by Engineer-in-Charge.

Replacement of tension spring in the shaft of rolling shutters suitable to the rolling shutter and making good the disturbed surfaces to match to the existing for gear operated type rolling shutter complete all as directed by Engineer-in-Charge.

Replacement of ball bearing in the shaft of rolling shutter complete all as directed by Engineer-in-Charge.

S&F in repairs Safty lever lock mild steel with four lever for rolling shutter complete all as specified and directed.

S&F 50mm dia MS pipe heavy grade as in shaft in rolling shutters including taking out old unserviceable pipe complete all as directed by Engineer-in-Charge.

S&F in repairs Steel rolling shutter, 1.25mm thick with bal bearing as specified including top cover, anchorging rod hasp and staple and one shop coat of primer errected in position as indicated complete push pull or mannual type incl taking down complete all as directed by Engr-in-charge.

Grinding or polishing of old stone surface / terrazo tiles and toping of any type including cutting rubing and filling the joint with cement and pigment to match the shade of slab complete

Cleaning of roofs,including all vegetation,shrubs including grubbing of roots of any size and description,disposal of debris outside MOD area and including filling of holes with PCC 1:2:4 type B0 (using 12.50 mm graded stone agg) complete all as directed

Dismantling and removing sunken floor filling and depositing the same ouside MOD land complete all as directed.

M&L for plain cement concrete 1:5:10 type E2, (using 40 mm graded stone aggregate) as in filling of sunken floors complete all as directed.

M&L for 15 mm thick rendering on concrete/brick surfaces in CM 1:4 duly mixed with water proofing compound @ 2% by the weight of cement and finished even and smooth without using extra cement complete all as directed. Note : water proofing compound shall be measured and paid separately.

Bismi Engineering (BID ID -3068341)

UNITY ENGINEERING TRADERS (BID ID -3065615)

M/S PAVANI ENTERPRISES (BID ID -3065506)

Anjana corporation (BID ID -3067592)

BHAGYARAM ENTERPRISES (BID ID -3065359)

Venkat Sai Enterprises (BID ID -3068671)

EXELLENT POWER CORPORATION (BID ID -3065033)