REPAIR TO CERTAIN JOINERY AND ALLIED WORK IN ZONE A AND B (OTM ACCN) UNDER AGE(I) AYODHYA CANTT.

Taking down of chowkhats or frame with shutters n.exe. 1.5 Sqm each without taking of shutter from the frame complete all as spd and directed by Engr-in-charge.

Taking down of chowkhats or frame with shutters exe. 1.5 Sqm but nexc. 4 Sqm each without taking of shutter from the frame complete all as spd and directed by Engr-in-charge.

Taking down shutter of any description exc 1.00 sqm but n exc 2.0 Sqm each , complete all as specified and directed by Engr-in-charge.

S& F framed work as in door frame or gated,PVC tank caging of angle or other section with gusset plates, rails, braces etc., completted drilled for fixing of steel sheeting or covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging ; also fastening and fixing completed ( Fe 401-W (Gde-E-250) qualityA) complete all as spd and directed by Engr-in-charge.

M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members incl necessary welding complete all as spd and directed by Engr-in-charge.

M&L for preparation of steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed

S & F for 30 mm thick Flush shutter solid core construction with block board core moulded design with sunmica sheets on both side and edges hydraulic hot preseed with adhesive complete all as specified

S&f 30 mm thick factory made solid WPC(Wood plastic composite) moulded gauged door shutter comprimising of virgin polymer of K values 58-60 (suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)having minimum density of 650 kg/cum and screw withdrawl strength of 1800N (Face) & 900 N (edge)minimum compressive strength of 50 N/mm2 and resistance to spread of flame of class A Category with property of being termite/borer proof,water/moisture proof and fire retardant.WPC to be laminated with PVC Foil of minimum 14 microns thick of approved design plasted with hot melt adhesive on both faces of shutter with wiremesh in any no of division min 4 no pannels with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm shall be fixed with 15X15 square wpc beading in side rails with screwing 8X28 heat metal zinc coated screws can be remove or fix again after changing of wire mesh when be remove or fix again after changing of wire mesh when needed complete all as specified

S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified.

Providing and fixing factory made single extruded WPC wod polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as spd and directed by Engr-in-charge.