Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.7 LAccepted-AOC | L1 | Accepted-AOC DUE TO LOWEST BID | |
| 2 | L2₹24.5 L+₹1.2 L (5.36%)Rejected-Finance | L2 | Rejected-Finance DUE TO HIGHER BID | |
| 3 | L3₹24.9 L+₹1.7 L (7.20%)Rejected-Finance | L3 | Rejected-Finance DUE TO HIGHER BID | |
| 4 | L4₹26.0 L+₹2.8 L (11.9%)Rejected-Finance | L4 | Rejected-Finance DUE TO HIGHER BID | |
| 5 | L5₹26.1 L+₹2.9 L (12.3%)Rejected-Finance | L5 | Rejected-Finance DUE TO HIGHER BID |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
30 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST FERPZEPUR CANTT
GE WEST FERPZEPUR CANTT
REPAIR TO PUMPING SET PANEL BOARDS AND ITS CONNECTED ITEMS IN THE AREA EAST OF JHOKE ROAD UNDER GE WEST FERPZEPUR CANTT
2022_MES_520998_1
802022/GE-09/E8
Open Tender
Miscellaneous Works
Works
180 days
FERPZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE WEST FERPZEPUR CANTT
₹50,000
Yes
22 Aug 2022
9 Jul 2022
1 Aug 2022
9 Jul 2022
30 Jul 2022
23 Jul 2022
Amount
Lifting up submersible pump set of any capacity alongwith MS/GI column pipe flanged 150 mm dia from bore well at different locations including submersible cable upto 25 sqmm, 3 core and dismantling cable joints etc upto 50mtr depth complete all as specified . Note : (i) Submersible cable, column pipes to be stacked at a suitable place at TW/pump house for inspection preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc and painting with synthetic enameled paint.. (ii) All T&P shall be arranged by the contractor. (iii) All items taken out from TW/Pump Houses shall be kept in well secured places and shall be the responsibility of the contractor till the machines are not made functional. (iv) Contractor's representative will report to AGE E/M Yard on all working days for receiving Complaints and have to rectify the same within 24 hours otherwise contractor shall be liable for a recovery of Rs 1000/- per complaint.
All as per srl item No 1 above but column pipe upto 50 mm dia
Lowering of submersible pump set of any capacity alongwith MS column pipe exc 50 mm dia but not exc 150 mm dia, making flanged joints, cable connections and providing binding dori for fixing and packing of submerssible cable all as specified & directed.
All as per srl item No 3 above but upto 50mm dia column pipes.
Dismantling of pump set for inspection and identification of serviceable and unserviceable parts for repair and overhauling and reassembling after replacement of unserviceable parts complete upto 50 HP submersible pumping set all as specified and directed . Make of pumps :- Calama/BS/ kirloskar/CRI/Amrut/SSI. Note:- Rate quoted for the this item shall include labour charges for the refixing of serviceable parts and fixing of new parts. (b) Spare parts shall be measured and paid seprately under supply only item.
Bown bush G.M suitable for 50 HP pump
Rubber bush suitable for 50 HP pump
Sleeve G.M suitable for 50 HP pump
Sleeve Stainless steel suitable for 50 HP pump
G.M enclsoed type Impeller suitable for 50 HP pump
Bowl for stages suitable for 50 HP pump
Internal NRV threaded suitable for 50 HP pump
Upper housing suitable for 50 HP pump
Neck ring steel suitable for 50 HP pump
Neck ring G.M suitable for 50 HP pump
Steel stud 100mm x 45 mm suitable for 50 HP pump
Main pump shaft suitable for 50 HP pump
Motor pump coupling suitable for 50 HP pump
All as per item No 5 above but capacity of submersible pumping set upto 40/45 HP capacity.
Bown bush G.M suitable for 40/45 HP pump
Rubber bush suitable for 40/45 HP pump
Sleeve G.M suitable for 40/45 HP pump
Sleeve Stainless steel suitable for 40/45 HP pump
G.M enclsoed type Impeller suitable for 40/45 HP pump
Bowl for stages suitable for 40/45 HP pump
Internal NRV threaded suitable for 40/45 HP pump
Upper housing suitable for 40/45 HP pump
Neck ring steel suitable for 40/45 HP pump
Neck ring G.M suitable for 40/45 HP pump
Steel stud 100mm x 45 mm suitable for 40/45 HP pump
Main pump shaft suitable for 40/45 HP pump
Motor pump coupling suitable for 40/45 HP pump
All as per item No 5 above but capacity of submersible pumping set upto 30 HP capacity.
Bown bush G.M suitable for 30 HP pump
Rubber bush suitable for 30 HP pump
Sleeve G.M suitable for 30HP pump
Sleeve Stainless steel suitable for 30 HP pump
G.M enclsoed type Impeller suitable for 30 HP pump
Bowl for stages suitable for 30 HP pump
Internal NRV threaded suitable for 30 HP pump
Upper housing suitable for 30 HP pump
Neck ring steel suitable for 30 HP pump
Neck ring G.M suitable for 30 HP pump
Steel stud 100mm x 45 mm suitable for 30 HP pump
Main pump shaft suitable for 30 HP pump
Motor pump coupling suitable for 30 HP pump
All as per item No 5 above but capacity of submersible pumping set upto 7.5 HP capacity.
Supply only stainless steel pump main shaft suitable for and upto 7.5 HP pump set all as per existing size and shape.
Supply only motor pump coupling suitable for and upto 7.5 HP pump set
Supply only impeller all as existing size and shape suitable for submersible pump suitable for and upto 7.5 HP pump.
Supply only PVC bushes suitable for submersible pump upto 7.5 HP
Supply only Submersible cable jointing kit for 6 - 16sqmm 3 core submersible cable.
Supply only Submersible cable jointing kit for 25 sqmm 3 core submersible cable.
Supply only Rubber gasket with 8 Nos holes made out of 6mm thick superior quality neoprime sheet suitable for 125/150mm bore flange.
Dismantling and re-assembling of submersible electric motor 30 HP, 3 phase 440 volts and taking out burnt material and rotor, cleaning and making it smooth for rewinding complete. Note : The items required for repair & replacement will be measured under supply only item of sch A
Housing G.M bush rotor suitable for 30 HP motor
Rubber bush suitable for 30 HP motor
Rotor sleeve steel suitable for 30HP motor
Steel friction plate suitable for 30 HP motor
Carbon thrust plate suitable for 30 HP motor
"T" bolts suitable for 30 HP motor
Seal for motor suitable for 30 HP motor
Sand guard suitable for 30 HP Motor
Lower housing with bush suitable for 30 HP Motor
Upper housing with bush suitable for 30 HP motor
Dismantling and re-assembling of submersible electric motor 40/45 HP, 3 phase 440 volts and taking out burnt material and rotor, cleaning and making it smooth for rewinding complete. Note : The items required for repair & replacement will be measured under supply only item of sch A
Housing G.M bush rotor suitable for 40/45 HP motor
Rubber bush suitable for 40/45 HP motor
Rotor sleeve steel suitable for 40/45 motor
Steel friction plate suitable for 40/45 HP motor
Carbon thrust plate suitable for 40/45 HP motor
"T" bolts suitable for 40/45 HP motor
Seal for motor suitable for 40/45 HP motor
Sand guard suitable for 40/45 HP Motor
Lower housing with bush suitable for 40/45 HP Motor
Upper housing with bush suitable for 40/45 HP motor
Dismantling and re-assembling of submersible electric motor 50HP, 3 phase 440 volts and taking out burnt material and rotor, cleaning and making it smooth for rewinding complete. Note : The items required for repair & replacement will be measured under supply only item of sch A
Housing G.M bush rotor suitable for 50 HP motor
Rubber bush suitable for 50 HP motor
Rotor sleeve steel suitable for 500HP motor
Steel friction plate suitable for 50 HP motor
Carbon thrust plate suitable for 50 HP motor
"T" bolts suitable for 50 HP motor
Seal for motor suitable for 50 HP motor
Sand guard suitable for 50 HP Motor
Lower housing with bush suitable for 50 HP Motor
Upper housing with bush suitable for 50 HP motor
All as per srl No 14 above but upto 7.5 HP, 3 phase 440 volts complete with all minor repair items all as specified and directed.
Rewinding of stator 50 HP motor with existing size and gauge of PVC insulated water proof copper winding wire and insulation material complete all as specified and directed. Make of winding wire Finolex/CCI/KEN. Note : Contracter will ensure Warranty of rewinded motor for 6 month period. Contractor rep will report on all working days to AGE E/M yard for taking complaints.Complaint will be rectified within 48 Hrs. Contractor will be liable for a recovery of Rs. 1000/- for delay in completion of complaint.
All as per srl item No 16 above but of capacity 45 HP motor.
All as per srl item No 16 above but of capacity 40 HP motor.
All as per srl item No 16 above but of capacity 30 HP motor.
All as per srl item No 16 above but of capacity up to 7.5 HP motor.
Dismantline of faulty starter panel MUG 30 and MUG 50 type for inspection and identification of serviceable and unserviceable parts for repair and maintenance and reassembling after replacement of unserviceable parts complete all as specified and directed . The spares shall be measured and paid seperately under respective BOQ item. Note : (i) Minor repair of LT/Starter Panels etc. without using any spares to make the pump sets operational shall deemed to included in the quoted rate. (ii) Contractor rep will report on all working days to AGE E/M yard for taking complaints.Complaint will be rectified within 48 Hrs. Contractor will be liable for a recovery of Rs. 1000/- for delay in completion of complaint.
Supply only three poles power contactors of ML-3 type with AC 3 rating 40 and Aux contacts 2 No + 2 NC suitable fo MUG 30 starter as per Cart Part No SS 90721 of L&T or equivelent in seimens/BCH/C&S.
Supply only three poles Power Contactors of ML-4 type with AC3 rating 70 and Aux contacts 2 Nos + 2 NC as per existing suitable for MUG 50 Strarter sample and make or equivelent in seimens/BCH/C&S/L&T.
Supply only Front housing and moving bridge kit and combination coil with timer suitable for ML-03 star delta automatic starter 1-100 sec, 115/240 volts AC supply all as directed. Make:- Seimens/BCH/L&T.
Supply only Front housing and moving bridge kit and combination coil with timer suitable for ML-04 star delta automatic starter 1-100 sec, 115/240 volts AC supply all as directed. Make:- Seimens/BCH/L&T.
Supply only of thermal over load relay directly operated with relay range 28-42 Amps suitable for MUG 30 starter Make:- Seimens/BCH/L&T/C&S/ESSMA.
Supply only of thermal over load relay directly operated with relay range 45-75 Amps suitable for MUG 50 Starter. Make:- Seimens/BCH/L&T/C&S/ESSMA.
Supply only LED cluster indicator lamp Red, Blue, Yellow.
Supply only of single phase preventor voltage operater suitable for motor of capacity 30-50 HP with following features:- (a) Low voltage cutt off system (b) High voltage cut off system (c) Single phase cut off system. Make :- L&T Cat Part No SPPR type SDz5, 380 V for MUG 30/50 Minilac/Teleme Chunie/ SINETRAC.
Replacement of heavy duty Extended Life Capacitors delta connection 440 volts, 3 phase, 50 Hz with frame size B1 and of 15-20 MFD. Make:- Seimens/L&T/BCH/EPCUS.
M&L in repalcement of rusted/unserviceable MS clamp of suitable size with nut,bolts & washers complete for hanging of submersible pump set with column pipes in bore well any size/cap and MS Cap of suitable size as casing cover of bore well complete all as directed by Engr-in Chrge
Taking out and re-fixing in exiting step up after replacement of old burnt copper widing of stator unserviceable booster pump/fountain motor/ of capacity 1 HP to 3 HP dismantling the motor and taking out old burnt copper winding of stator with similar size of super enameled copper winding wire of make: HTP/Devidayal after providing 'E' class material including replacement of bushes, Name pad and varnishing and testing complete all as specified and direted.
M& L for MS column pipe coated with black water proof enamel paint both ends flaged suitable for lowering of submersible pump, 10 feet in length of 150mm dia complete all as directed.
M& L for MS column pipe coated with black water proof enamel paint both ends flaged suitable for lowering of submersible pump, 10 feet in length of 100mm dia complete all as directed.
S&F of Submersible Copper cable 3 core, 6 sqmm including lowering/lifting of submersible pump set MAKE : Finolex/CCI /GLOSTER.
S&F of Submersible Copper cable 3 core, 10 sqmm including lowering/lifting of submersible pump setMAKE : Finolex/CCI /GLOSTER.
S&F of Submersible Copper cable 3 core, 16 sqmm including lowering/lifting of submersible pump set. MAKE : Finolex/CCI /GLOSTER.
S&F of Submersible Copper cable 3 core, 25 sqmm including lowering/lifting of submersible pump setMAKE : Finolex/CCI /GLOSTER.
Supply & Fixing LED Bldg security light 45 watts,pressure die cast aluminium housing,heat resistane toughened glass with frame,IP 66 protection with bracket (for housing street light fittings) made of GI pipe 40 mm dia light grade 1.20 mtrs long duly cutted and welded at an angle of 120 degree and fixed to wall with 50 mm X 6 mm MS clamps - 02 Nos with 16 mm dia bolts,nuts,and washers complete all as specified and directed incl taking down of old unserviceable fitting of any type..
Supply & Fixing LED flood light fitting 100 watts,pressure die cast aluminium housing,heat resistane toughened glass with frame,IP 66 protection with bracket for housing floo light fittings complete all as specified and directed incl taking down of old unserviceable fitting of any type as per Crompton Cat Part No LSFN-120-CDL/60/M
Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI strip 25 x 4 mm by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)
M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4mm galvanised iron strip
Testing and developing the bore well by means of Air compressor of 5000 PSI till sand free clear water discharge is obtained to achive maximum yield of suitable capacity for first 30 hours running complete all as specified and directed (All equipments shall be arranged by contractor at his cost) Note : 1) All T & P provided by the contracter. 2) All type cost are likley to be included in this job.
Supply,Laying, testing in replacement of UG cable XLPE insulated, screened, PVC bedded galvanized steel strip armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 95 sqmm 3.5 core complete all as specified. Note : Cable shall be replaced from LT Panel near transformer to LT panel inside the Pump House.
manoj and company
M/s Sanjiv Kumar
jaspal singh and co
Kissan contractor and engg works
M/s Mukand Lal Khanna
B.L. Chaudhri and Co.
M/S KRISHNA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .