For the Work of Business Plan 2024-25 For Earthing of Power Distribution Transformers and Installation of 9 No. Additional 250 KVA Transformer Due to Overloading of 400/630 KVA Transformer Work Under EUDD-I, Meerut.

Amount

Cartage of line material form central sore to JE store including loading & unloading at both ends.

Cartage of line material form JE store to various site of work including loading & unloading at both ends.

cartage of 11 Mtr long ST/ PCC pole form central store to JE store including loading & unloading at both ends.

cartage of 11 Mtr long ST/ PCC pole form JE store to various site including loading & unloading at both ends.

cartage of 250 KVA T/F form central store to JE store including loading and unloading both of ends.

cartage of 250 KVA T/F form JE store various site including loading and unloading both of ends.

Erection of double pole strucutre on 11 Mtr ST pole with stone pad including fabrication & fixing of top channel, dropper channel suitable for 250 KVA a transformer (As per RESPO construction mannual)

Erection of PCC pole complete in all respect.

Making a plinth od size suitable of 400/250 KVA T/F 3x2x1.0 m above ground level after digging of earth brick ballast shall be provided and remering will be done porperly after that a retaining will be 9 with by first class brick in ratio 1:4 of cement and sand will be made. the earth shall be filled upto 1 feet below the top of plinth after this brick ballast shall be provided upto 6 form the earth level and proper ramerging shall be done 1 no, jall of 12mm shall be fixed in the hollow of plinth and four inches thick RCC in 1:2:4 ratio of cement, sand, stone ballast shall laid on the top of the plinth.

Making and fancing suitable for 250/400 KVA T/F Plinth.including providing,fabrication and fixing of wire mesh fancing frames of size 3.0x2.0x2.0mm fabricate out of MS angle iron of size 35x35x6 sq.mm having 02 no. legs of 15cm long in each frame duly welded and fixing with wire mesh of size 25x25x10 SWG hot dipped galvanized with in the frame pressed under MS flats of size 25x5 mm inside the angle on all four side with help of aprox 20no. bolt and nut of 10 mm diameter 15 cm legs of frame will be grouted in 1:2:4 cement coarse sand and 20 mm gauge stone ballast with paint with one coat of red oxide and two coat of aluminium paint of approved mark after proper cleaing

Safely mounted 250 T/F on double pole structre/plinth and making jumpering and binding making all connection properly.

Water level Earthing of neutral and body distribution transformers of 11/0.4 KV transformers by boaring of earth upto water level (15 to 20 mtr) and lowering of GI pipe 32mm dia upto water level and connecting the same by MS flate of size 40x4 mm with transformers the transformers will be earthed properly including/cutting,jointing ,welding etc. of MS earth strip and connecting on earthing with the neutral bushing of transformer and other to the body of transformer at several points the GI pipe will be connected. to each other with the help of G.I. sockets and a cap will be provided on the upper part of the G.I. pipe for pouring of water during summer season/chemical earthing.

Laying,lagging,sagging of Weasel conductor.

Laying of 11 KV XLPE Cable 3x70mm

providing & fixing of cable jointing kits 3x70sqmm

Dismentling of damaged LT ABC & Laying,lifting and sagging of L.T ABC (3x120sqmm)

providing of erathing rods and earthing of poles with earthing rod complete in all respect.

Fabrication and fixing of channel angle as per site requirement.

Providing & fixing of 11 KV fuse set on transformer properly complete work in all respect.

providing and fixing of tailless unit as per site requirement.

providing and fixing of all type off size clamps. (suspension,dead end, holding ,J-huk) as per site requirement

providing and fixing Nut And Bolts off size.

water level Earthing of neutral and body of POWER TRANSFORMER of 33/11 KV transformer by boaring of earth upto water level (18 to 25 mtr) and lowering of GI pipe 38mm dia upto water level and connecting the same by ms plate of size 40x4 mm with transformer.the transformer by boaring properly including/cutting jointing. welding etc. of MS earth strip of size 1.25 inches wide & 2mm thick connecting one earthing with the neutral bushing of transformer and other to the body of transformer at serveral points. the GI pipes will be connected to each other with the help of G.I sockets and a cap will be provided on the upper part of the G.I pipe pouring of water during summer seasion.

Water level earthing of neutral and body of Distribution transformer/VCB of 11/0.4kv s/s by boaring of earth upto water level (15 to 22mtr) and lowering of GI pipe 38mm dia upto water level and connecting the same by ms flate of size 40x4 mm with transformer.the transformer will be earthed properly including/cutting jointing. welding etc. of MS earth strip of size .75 inches wide & 1.25 mm thick connecting one earthing with the neutral bushing of transformer and other to the body of transformer at serveral points. the GI pipes will be connected to each other with the help of G.I sockets and a cap will be provided on the upper part of the G.I pipe pouring of water during summer seasion.

VISHNU TRADING CO.