SPL REPAIRS TO BATHROOMS IN BLDG NO P-314, P-326 AND P-327 OR LIVING ACCN,PROVN OF PARKING SHED BEHIND BLDG NO P-170 ADM BLOCK BDE CAMP,SPL REPAIRS TO PERIMETER BOUNDRY WALL APPROX 39 MTRS DAMAGES DURING STORM NEAR A BN AT SUNJUWAN UNDER GE JAMMU

Amount

Taking down shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frames with shutters exc. 1.5 Sqm and n.exc 4 Sqm each (without taking off shutters from the frame) including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing from site complete all as specified and as directed.

All as per ser item No 2 here in before but n exc 1.5 sqm each complete all as specified and as directed.

Taking down door and Refixing shutters after making necessary repair of any description exc.1 Sqm but n.exc. 2 Sqm each complete all as specified and as directed.

S&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails Mild steel frame shall be coverred with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail. lock rail and bottom rail on either side and gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement suppling and fixing in the frame at site as per specification clause No 8B.1 to 8B.10 and drawing on page No 156 of MES SSR-2010 Part-II complete all as specified and as directed.

S & F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube ccomplete all as specified and directed.

S&F Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately)with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos MS Tower bolts 150 mm long for each leaf and 08 mm square bar grill/guard bars at spacing as shown on Drg welded MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts , incl two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed etc .

M&L for framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, door chowkats and similar work conforming to Fe 410-0 or Fe-310 complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and as directed.

S&F 3mm thick sheet glass figured and glazing with oil putty in square pane complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type), not less than 12mm dia and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy including necessary nuts and bolts complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section (ISI Marked) complete all as specified and as directed.

S&F 100mm long butt hinges, medium weight cold rolled mild steel (ISI Marked) complete all as specified and as directed.

S&F 150mm long aluminium handle extruded alloy, fabricated 'D' type anodised (ISI Marked) complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster/wall tiles from concrete/stone surfaces including raking out joints, hacking for key, scrubbing down with water etc and its removal from site as specified & directed.

M&L for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement (internal plaster) complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4, finished even and smooth without using extra cement (external plaster) with WPC complete all as specified and as directed. Note : WPC shall be paid separately.

M&L for 10 mm thick plaster on ceiling in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of old decorated surfaces of wall by brooming down and scrapping wherever necessary and applying two coat of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of white wash on ceillings complete all as specified and as directed.

Preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L preparation of newly plaster surfaces of wall, soffits/facia etc and applying two coat of cement base paint complete all as specified and as directed.

Preparation of old decorated surfaces of walls, soffits/facia of chajja/roof slab etc and applying one coat of cement base paint complete all as specified and as directed by Engr-in-Charge.

M&L Preparing plastered or unplastered new surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S & F coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM (1:6) complete all as specified and as directed.

S & F coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement ot match over & including10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M & L Granite (of any type) tiles 15mm to 18mm thick machine cut, on cooking platform, staircase etc, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing over 15mm thick screed in CM (1:4) complete all as specified and as directed.

Taking down 15 mm bore galvanized steel water tubing with all fittings from walls and ceilings or laid in floors complete all as specified and as directed.

All as per ser item No 31 here in before but 20 mm bore complete all as specified and as directed.

S & F 15 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and as directed.

All as per ser item No 33 here in before but 20 mm bore complete all as specified and as directed.

Re-fixing old steel tubing and connections in new or old position of 15 mm bore of pipe (walls, ceiling or floor etc) complete all as specified and as directed.

All as per ser item No 35 here in before but 20 mm bore of pipe complete all as specified and as directed.

S&F in repair 15mm bore stop valves, cast copper alloy (ISI marked) screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) for iron pipe or for unions complete all as specified and as directed.

All as per ser item No 37 here in before but 20 mm bore complete all as specified and as directed.

S&F in repair angle valves CP screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs vitreous china squatting pan, 'Orrissa ' pattern, size 580 x 440 mm white , with integral foot rests complete including provision of lime concrete beding, including connection to P or S trap, and to flushing pipe, anti-syphonage pipe, etc including maing good to floors all as specified and directed.

S&F in repair PVC low level flushing cistern, 10 litre capacity, symphonic action type, white inlet valve, float, handle, incl brackets, 15mm PVC connection 4500mm long, and 32mm dia PVC flushing pipe including fixing of long screw chromium plated complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (EWC/longpan/padestal pattern) white in colour including seat cover, closed pattern, flat bottom, and mild steel chromium plated hinging device complete all as specified and directed.

S & F in repair wash hand basin oval type 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore, fixed in repairs complete all as specified and as directed.

S & F in repairs pillar cock, cast copper alloy, Chromium Plated, fancy type, with capstan heads, screwed down high pressure with letter hot & cold with long screwed shanks and fly nuts, etc complete all as specified and as directed.

S&F in repair stop valves CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.

S&F in repair CP shower rose wih swivel joints brass chromium plated 125 mm size, including fixing to steel pipe or union all as specified and directed.

S & F in repairs CP brass towel rail fancy type 600mm long fixed with CP brass screw or equivalent complete all as specified and as directed.

S&F in repairs ISI marked 1000 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including PTMT Ball valves 20mm bore, high pressure with eposy coated aluminium rod & high density plastic ball etc complete all as specified and as directed.

M & L soap shelf, PVC white/colour appx size 450x125x40mm (as per sample) complete all as specified and as directed. Make : Prayag.

S&F in repair bib taps, long body, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Dismantling of 50mm, 75 mm and100mm dia cast iron pipes, jointed in cement mortar or lead joints and taking out of trenches if required complete all as specified and as directed.

S&F 100mm dia cast iron soil waste and vent pipe,sand cast in any length with or without ears with cement joints laid in trenches or in floor or fixed to walls complete all as specified and as directed.

All as per item No 53 here in before but fixing only complete all as specified and as directed.

All as per item No 53 here in before but 75mm bore pipe complete all as specified and as directed.

All as per item No 55 here in before but fixing only complete all as specified and as directed.

All as per item No 53 here in before but 50mm bore complete all as specified and as directed.

M&L cast iron bends (any radius), diminishing pieces or tappers of pipe 100mm bore complete all as specified and as directed.

All as per ser item No 58 here in before but 75mm bore pipe complete all as specified and as directed.

S & F in repair 100mm cast iron bends with access door, with (ordinary or inverted) spigot with parallel branches with single (Y) laid in trenches or fixed to walls complete all as specified and as directed.

Demolition brickwork built in cement mortar or cement lime mortar complete all as specified and as directed.

Brick work with old size fly ash bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) and removing from site complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n. exc. 10 Sqm on plan and nexc 1.5 mtr in depth and getting out in any type of soil complete all as specified and as directed.

Returning fillling in including spreading levelling watering and well ramming in layers n.exc 25cm in soil complete all as specified and as directed.

Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M & L for Reinforced Cement Concrete type B-1, 1:2:4 (20mm graded aggregate) in foundation, including fafts, footing, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete, manhole cover slab etc complete all as specified and as directed.

M & L for RCC type B-1, 1:2:4 (20mm graded aggregate) in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L cast iron floor trap with steel grating including jointing to waste pipe fixed in cement concrete type BI (1:2:4) dia of outlet in 100mm complete all as specified and as directed.

M&L for cast iron cowls for 75 mm bore of pipe complete all as specified and as directed.

M & L for PVC (SWR) floor trap 63mm dia for WHB, including 40mm dia HDPE pipe upto the trap of bath room and jointing with solvent with outlet pipes, stainless steel grating etc fixed in repairs complete all as specified and as directed.

S & F PVC (SWR ) pipes,110 mm bore, single socketed,in any length, with rubber joints, fixed to walls complete including fixing clamps etc with nut & bolts incl taking down of pipe complete all as specified and as directed.

M & L cement concrete type B-1, 1:2:4 (20mm graded aggregate) 25mm thick in floors and finished complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M & L Cement concrete 1:5:10 (40 mm size coarse agg) as in mass filling in sunken floor of toilets complete all as specified and as directed.

Rendering 15mm thick in cement sand mortar 1:4 mixed with & including liquid integral water proofing compound 0.20 Ltr per 50 kg bag of cement both on floor and wall after proper curing and drying and apply Epoxy resins coating polymer modified cementation coating like brush bond of Fosroc Pedilite and Bostic as per manufacturer's instructions both on floor as well as on walls of sunken floors complete all as specified and as directed by Engr-in-charge.

Surface excavation n. exc 30 cm deep and averaging 15cm deep and getting out any type of soil complete all as specified and directed

Hardcore of broken brick aggregate gauge not exceeding 63mm deposited spread and leveled in layers not exceeding 15 Cm thick watered and rammed to a true surface complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling/ mass concrete complete all as specified and as directed.

M&L for structural steel work for MS section as in main and cross beams, hip and jack rafters, purlins, columns where connected to common rafters and running rails and guides for sliding doors, post fixed with angle cleats or other connecting plates and similar items complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified and directed. Note:- The profile of sheet shall be as per sample kept in GE's office.

M&L coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade, with grey cement and pigment complete all as specified and as directed.

Providing precast cement concrete type B1, 1:2:4 (20mm graded aggregate) solid building block as a kerbstone (with plain or interlocking joints as directed) setting in cement mortar 1:4 complete all as specified and as directed.

Supply and spreading clean and dry sand free from sharp material for laying of PCC interlocking tile under floor including watering and consolidation complete all as specified and as directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for Cement concrete, complete all as specified and as directed.

Dismantling cast iron work i.e. fencing posts, horns, barbed wire etc in compound wall in any condition and in any position complete all as specified and as directed.

Excavations over areas not exc 1.5m deep and getting out in hard/dense soil all as specified and directed.

Reinforced cement concrete M-25 (design Mix) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Reinforced cement concrete M-25 (design Mix) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses middle and top Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Reinforced cement concrete M-25 (design Mix) as in columns, pillars, piers, posts and struts complete all as specied and as directed.

Use and waste form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical or to batter of fair finished surfaces complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves, RCC Wall etc. including support of fair finished surfaces complete all as specified and as directed.

S & F Mild steel bars 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,stirrups, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S & F galvanised, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with provision of galvanised mild steel wire staples or steel pins etc complete all as specified and as directed. Note :- Each line of wire to be measured.

M&L Concertina coil 600mm dia fixed on security wall all as specified and directed by Engr-in-Charge.

Brick work with sub class 'B' bricks using old size bricks straight or curved on plan exceeding 6m mean radious built in cement mortar 1:4 complete all as specified and directed.

All as per Ser item No 98 above but except bricks complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brock or concrete surface and surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:4 on other than fair faces of brick or concrete surface and surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of newly plaster surfaces of wall, soffits/facia etc and applying two coats of exterior emulsion paint over a coat of wall care putty complete all as specified and as directed.

M/S K D Construction Co

M/S TRIKUTA BUILDERS

M/S GEE EMM MIR

Bidder Name

M/S TRIKUTA BUILDERS

M/S GEE EMM MIR

M/S K D Construction Co

UPPAL CONSTRUCTION