SPECIAL REPAIR TO TOILETS OF KV SCHOOL AT INS RAJALI ARAKKONAM

Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed.

M&L 10 mm thick rendering on internal wall surfaces in cement plaster 1:6 on fair faces incl finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for 5 mm thick rendering in CM 1:3 over ceiling surfaces complete incl finishing the surfaces even and smooth w/o using extra cement complete all as specified and as directed.

M &L for 2 coat of distember oil emulsion paint over a coat of primer and putty on wall including preparation of surface complete all as specified and directed. by using mechanicall tool/ auto roller complete all as specified and directed

M & L for preparation of new plastered surface of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L preparing old surfaces of ceilings by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss & efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling etc complete all as specified and as directed

Complete Removal of existing treatment on wall by vacuumbased sanding machine removal of nails etc & filling cracks and applying two coats of oil bond distemper over one coat of alkali resistant primer and putty by using mechanicall tool/ auto roller complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site. Note - rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 complete all as specified and as directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed

M&L Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 100mm long complete all as specified and as directed

S&F in Aluminium handles, cast type, anodised 100mm long complete all as specified and as directed

S & F 100mm Butt hinges, extruded aluminiumalloy with galvanisedmild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed

S&F powder coated anodised aluminium ventilator with fixed aluminium frame of size 65 x 40 x 1.98 mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4 mm thick pinhead glass and remaining portion to be louvered using 4 mm thick pinhead glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm incl necessary channel frame work, including rubber gasket and aluminium beading including taking down old ventilator in any size and makecomplete all as specified Note : rates shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc complete all as specified and as directed

S&F powder coated anodised Aluminium alloy sections 3 tier track sliding windows seires B weight of section frame 1.248Kg/Rm and shutter section weight 0.547Kg/Rm Jindal or equivalent duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0mm nominal thickness, Aluminium wire cloth 0.45mm dia and average width of aperture 1.4mm, aluminium alloy handles etc. complete all as specified and directed. Note : Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the permises etc., complete all as specified and as directed

M&L for Joint free coloured Non-skid Ceramic tiles 7 to 8 mm thick in floors, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set & jointed in neat cement slurry and pointed in white or coloured cement and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles as directed at site to match complete all as specified & directed.

Material and labour Glazed ceramic coloured (Desiner) tiles 450X300X7mm thick,laid in pattern decided by Engr-in-charge, as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed

Demolition of concrete of any description and in any position not other wise specially provided for cement concete (unreinforced) complete all as specified and as directed.

M&L 25 mm thk Cement concrete type B-1 , 1:2:4 (20 mm graded aggregate) as in leveling course below floor finish complete all as specified and as directed

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15 mm dia. complete all as specified and as directed

Taking down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape complete to walls and ceilings or laid in floors including all connected brass cpvc fittings and cutting grooves, filled with CM1:6 complete all as specified and as directed.

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape in any requirement complete to walls and ceilings or laid in floors iincluding all connected brass cpvc fittingsand cutting grooves, filled with CM1:6 complete all as specified and as directed

Supply and fix in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed complete all as specified and as directed

Supplied and fixed in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) complete all as specified and as directed

S&F Waste fittings,32mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and as directed

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed

S/F in repairs PVC valveless syphonic action type ,flushing cistern Low level white,with,with inlet ball valve ,float and handle 10 Ltr capacity including brackets complete all as specified and as directed.

S&F in repairs Vitreous china urinal half stall type, white with grating and union for discharge pipe incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement ; fixing automatic flushing cistern with brackets, flush pipe, waste pipe, pvc connection grating and union for discharge pipe complete all as specified ad as directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm bore pipe (minimum weight 60gms) complete all as specified and as directed.

S&F in repair Vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line complete all as specified and as directed

S&F in repairs fancy type CP bib taps, 15 mm bore with crutch or , screwed down, fixed as in repairs complete all as specified and as directed.

S&F CP in repairs Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs angle cock chromium plated with long shank and cup (concealed type) 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, fixed as in repairs complete all as specified and as directed

S&F in repairs Soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed

S&F in repair CP Tubular towel rail 20mm dia.D Type 60 cm Long aluminium anodised complete all as specified and as directed.

S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in repair 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F in repairs PVC(SWR) bend any radius, 110 mm dia complete all as specified and as directed.

S&F in repairs PVC(SWR) bend any radius, 75 mm dia complete all as specified and as directed.

S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for as in sunken floor complete all as specified and as directed

M&L for 15 mm thick rendering on concrete surfaces in CM 1:3 with integral water proofing compound @ 3% by weight of cement (Note: Water Proofing compound will be measured and paid separately ) both on floor and walls complete all as specified and as directed

Supply only integral water proofing compound complete all as specified and as directed.

M&L for applying approved Epoxy resins coating/ Polymer modified cementious mortar complete all as specified and as directed.

M&L PCC 1:5:10 type ,E2 (using 40 mm graded stone aggregate) as in sunken floor filling complete all as specified and as directed

Supply and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangemen complete all as specified and as directed

S&F in repairs of vitreous china wash down water closet pan (pedestal pattern), white with seat cover (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphoage pipe etc complete all as specified and as directed

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures, PVC conduits and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials from wall/ceiling etc to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into existing concealed conduit through Wall/Ceiling/Flore along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly and including 2 mm thick terminal boxes MS sheet flush mounted with 3 mm thick laminated hylem sheet fixed with camium plated iron screws for mountling switches, socket, fan regulators etc complete for for the following point wiring and making good disturbed surfaces matching with existing paint complete all as specified and as directed. . (a) One light/fan point controlled by one switch with cable 1.5 Sqmm size..

(b) All as per item ser no-53 above here in before but one 3 pin socket outlet 5 Amps, independent board with cables 2.5 Sqmm size.

(c ) All as per item ser no-2 above here in before but one 5 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including non metallic rigid PVC conduit of minimum 20 mm dia concealed/surface wiring through Wall/Ceiling/Flore along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly and including 2 mm thick terminal boxes MS sheet flush mounted with 3 mm thick laminated hylem sheet fixed with camium plated iron screws for mountling switches, socket, fan regulators etc complete for for the following point wiring and making good disturbed surfaces matching with existing paint complete all as specified and as directed. One Light/Fan point controlled by one switch.

Supply and fixing Modular switch one way 5/6 A white Active one module complete all as specified and directed

Supply and fixing Modular socket 5 Amp, 2/3 pin flush type Active white two module complete all as specified and as directed

Supply and fixing Modular switch one way 16 A white Active one module complete all as specified and as directed.

Supply and fixing Modular socket 16 A, 5 pin multi purpose Active white two module complete all as specified and as directed complete

S&F Ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed

Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc complete all as specified and as directed

Supply and fixing in repair of GI metal flush box suitable for mounting moduler plate of following modules:- (a) 2 Module

(b) 3 Module

(c ) 4 Module

(d) 6 Module

(e ) 12 Module

Supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for following modules:- (a) 1 Module

(b) 2 Module

(c ) 3 Module

(d) 4 Module

(e ) 6 Module

(f) 12 Module

M&L for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes complete all as specified and as directed

Supply and fix high efficiency wall mounted LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed.

Taking down the Ceiling Fan/Wall Fan/Exhaust Fan, cleaning and greasing and refixing the same and connecting up including provision of cable from ceiling rose with using 1.5/2.0 feet down rod as required in site after false ceiling complete all as specified and as directed

M & L for rewinding of burnt out exhaust fan 300 mm sweep motor with super enameled copper winding wire of suitable gauge/size including necessary tapping, varnishing etc, including taking down burnt copper winding and necessary transportation to workshop and back and testing complete all as specified and as directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed

Material and labour for Sub main wiring with Two run single core 6 sqmm for phase and neutral and one run single core 6 sqmm ass earth wire with multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade confirming to IS-694 continuity conductor drawn into existing concealed conduit or non-metallic rigid PVC conduit of minimum 20 mm dia as per site requirement wiring through wall/cable tray/ceiling/floor/roof etc including conduit accessories including taking down old sub main wiring with PVC conduit and taken as credit complete all as specified and as directed. Notes: (i) The disturbed surfaces shall be made good with existing surface including finishes as applicale. (i) Two different color wires shall be used for phase and neutral . (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iv) Three run of 6.0 Sqmm cable, and one run of PVC conduit will be measured as one unit.

S&F modular blanking plate 1 module complete all as specified and as directed

Please Enable Macros to View BoQ information