Balance work of Panchayat Ghar building at sildhar, Pyt. Sildhar Block Mahore and District Reasi under RGSA

Amount

Providing and laying in position cement concrete 1 Cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal sizeexcluding the cost of centering and shuttering - All work up to plinth level

Supplying and filling in plinth with fine sand under floors including watering ramming consolidating and dressing complete including all leads lift and carriage complete

Filling available excavated earth in trenches , plinth , sides of foundation etc. layers not exceeding 20cm in depth,consoladating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m including all leads lifts and carriage complete.

Centring and shuttermg including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and centilever

Centring and shuttermg including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centring and shuttermg including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls.

Providing and laying in position specified grade of reinforced cement concrete work in Beams, Suspended Floors, Roofs having Slope upto 15 degree, landing balconies, shelves, chajjas, lintels, bands, plain Window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). Including all leads, lift and carriage complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . Including all leads, lift and carriage complete

Brick work with common burnt clay F.P.S (non modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand) Including all leads, lift and carriage complete

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)

Half brick masonary with bricks of class designation 75 n foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand) Including all leads, lift and carriage complete

Extra for half Brick masonry in superstructure above plinth level upto floor V level

12 mm cement plaster of mix : 1:4 ( 1 cement : 4 fine sand ) Including all leads, lift and carriage complete

15 mm cement plaster of mix : 1:4 ( 1 cement : 4 fine sand ) Including all leads, lift and carriage complete

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. Including all leads, lift and carriage complete

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement and matching pigments etc. complete, Size of Tile 60x60 cm Including all leads, lift and carriage complete

Tile work in Skirting , Riser of steps and Dado (upto 2m height) over 12mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand ) and jointed with grey cement slurry @ 3.3kg/sqm including pointing in white cement mixed with pigment of matching shade complete

Painting top of roof with Residual type petroleum bitumen of penetration 80/100 at 17kg /10sqm impregnated with a coat of coarse sand at 60cudm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete

10mm thick (average) mud phushka of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35kg per cumof gobri leaping with 1 clay: 1 cow dung and covered with F.P.S. brick tile of class Designation 100 grouted with cement mortar 1 cement : 3 fine sand mortar mixed with 2% of intregal water proofing compound by weight of cement and finished neat.

Providing Gola 75 x 75mm in 1 cement : 2 coarse sand : 4 stone aggregate 10mm down gauge including finishing with 1 cement : 3 fine sand mortar in 75 x 75 mm deep chase Including all leads, lift and carriage complete

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement :3 coarse sand: 6 graded crushed aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Including all leads, lift and carriage complete

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 12.5 mm nominal size).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work ( two or more coats ) over and including priming coat with cement primer.

Finishing walls with water proofing cement paint ofapproved brand and manufacture to give an even shade .Two or more coats on new work including priming coat.

Applying priming coat: Red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new works over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats) .

Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to steel windows by welding & Fixed to openings / wooden frames with rawl plugs screws etc including all leads, lift and carriage complete

wood work in frames of Doors windows , ventilators and other frames and fixing in position(sal wood) Including fixtures and fittings all complete with leads, lift and carriage complete.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 2nd class Deodar wood (35mm) including all leads, lift and carriage complete

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : second class Deodar wood 35mm including all leads, lift and carriage complete

Providing and fixing glazed shutters for doors, windowsand clerestory windows using 1 Okg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinf!eS bright finished of required size with necessary screws. Second class deodar wood ncluding all leads, lift and carriage complete

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked 12mm thick ncluding all leads, lift and carriage complete