REPAIR REPLACEMENT OF JOINERY PLASTER FLOORING IN MD OTM ACCN AT WNC (O) MESS AND IMSC UNDER GE (NW) NOFRA COLABA MUMBAI

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc including errection of double steel scaffolding, covering with green cloth and all the safety masures/ precautions and remove the debries outside MoD land ( as per directions of BMC) complete all as specified and as directed.

Material and labour for rendering 20mm thick cement plaster in two layers 15mm thick base coat and 5mm thick finishing coat /final coat in CM 1:4 on brick work/concrete surfaces finished even and smooth without using extra cement by using WPC @2% by weight of cement complete all as specified and directed. Note :- WPC shall be measured and paid seperately.

Material and labour for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement by using WPC @2% by weight of cement complete all as specified and directed. Note :- WPC shall be measured and paid seperately.

Material & labour for preparation of newly plastered wall surfaces and applying two coats of water proof paint (rain coat of Dr. fixit or equivalent in STP, Fosroc, Krishna as approved) over a coat of Dr. Fixit primeseal or equivalent in STP, Fosroc, Krishna as approved or wall primer complete all as specified and as per manufacturer's instruction complete all as specified and directed.

Material and labour for rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour for rendering 10mm thick on fair faces of ceilings in CM (1:3) & rendering is to be finishing even & smooth without using extra cement.complete all as specified and directed.

Material and labour for preparation of new plastered surface of wall and applying 2 coats of oil emuslion distemper over a coat of 1 to 2 mm thick wall care putty (JK / Birla) complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceiling and applying three coats of white wash, complete all as specified and directed.

Supply and fix for MS framed works as in grills, railings, brackets for chajjas etc, conforming to FE-290 Gde E-165 complete all as specified and directed.

Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping sevews complete all as specified and directed.

Taking down Cast iron of 100mm bore fixed on wall or floor at any floor/ any height/ any location including all fittings & including scaffolding upto 16th floor of building complete all as specified and directed.

From Ground floor to 4th floor

From 5th floor to 8th floor

From 9th floor to 12th floor

Taking down Cast iron of 75mm bore fixed on wall or floor at any floor/ any height/ any location including all fittings & including scaffolding upto 16th floor of building complete all as specified and directed.

From Ground floor to 4th floor

From 5th floor to 8th floor

From 9th floor to 12th floor

Supply and fixing 100 mm bore of sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste fixed to wall & including scaffolding upto 16th floor of building complete all as specified and directed.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Supply and fixing 75 mm bore of sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste fixed to wall & including scaffolding upto 16th floor of building complete all as specified and directed.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Supply and fixing 75mm sand cast CI Branch pieces (Tee), Single (equal), ordinary or inverted (spigot or socket type) or with parallel branches with ovel access door and jointed with neat cement paste to CI pipes fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and as directed by Engr-in-Charge.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Supply and fixing 100mm sand cast CI Branch pieces (Tee), Single (equal), ordinary or inverted (spigot or socket type) or with parallel branches with ovel access door and jointed with neat cement paste to CI pipes fixed to wall & including scaffolding upto 16th floor of building complete all as specified and directed.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Material and labour in repair 75mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including complete all as specified and as directed.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Supply and fixing in repair 100mm CI ‘P’ or ‘S’ Traps jointed with neat cement paste fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and as directed by Engr-in-Charge.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Supply and fixing as in repairs 100mm cast iron sanitary connections—short connections pipe of length upto 300 mm complete all as specified and directed.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Supply and fixing in repair stack clamps suitable for securing 100mm dia CI pipe made out of 50mm by 5mm flat iron and 16mm dia round iron stays Including bolts and nuts and securing ends of stays fixed to wall & including scaffolding upto 16th floor of building complete all as specified and directed.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Supply and fixing stack clamps suitable for securing 75mm dia CI pipe made out of 50mm by 5mm flat iron and 16mm dia round iron stays Including bolts and nuts and securing ends of stays fixed to wall & including scaffolding upto 16th floor of building complete all as specified and directed.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Supply and fixing in repair cast iron cowl suitable for 75mm dia pipe & including scaffolding at roof / 16th floor of building complete all as specified and directed.

Supply and fixing in repair cast iron cowl suitable for 100mm dia pipe & including scaffolding at roof / 16th floor of building complete all as specified and directed.

Taking down rain water pipes/PVC pipes/cemented pipe (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc.,& including scaffolding upto 16th floor of building complete all as specified and directed.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Supply and fixing 110mm bore PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE & including scaffolding upto 16th floor of building complete all as specified and directed.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Supply and fixing 110mm bore PVC (SWR) branch piece, single (T) equal or unequal provided with access door fixed to pipe & including scaffolding upto 16th floor of building complete all as specified and directed.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Supply and fixing 110mm PVC (SWR) bends any radius fixed to pipe & including scaffolding upto 16th floor of building complete all as specified and directed.

Supply and fixing 160mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE & including scaffolding upto 16th floor of building complete all as specified and directed.

(i) From Ground floor to 4th floor

(ii) From 5th floor to 8th floor

(iii) From 9th floor to 12th floor

Demolition of cement concrete in ground floors and pavings any thickness complete all as specified and directed.

Material and labour PCC (1:2:4) type B-0 (12.5mm graded stone aggregate) as in padding concrete to maintain slope towards drain pipe mixed with WPC 3% by weight of cement , finished even & smooth without using extra cement, complete all as specified. Note : WPC measured and paid separately.

Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing and removing rubbish off the premises (outside MD land) complete all as specified and directed.

Material and labour coloured non-skid ceramic tiles 7-8mm thick rectified glossy (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over/ incl 15mm thick screed bed (1:6), complete all as specified and directed.

Material and labour, Glazed ceramic tiles coloured of size 350x 250x 7 mm/ 450X 350X 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick backing coat in CM (1:4) complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed.

Material and labour for machine cut cudappa stone slab 20-25 mm thick laid over 15mm thick screed base in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour Granite (of any type) work (table rubbed and polished) 18mm to 20mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite., and nosing /rounding to edges of stone slabs one edge complete all as specified and directed.

Taking down of chowkhats or frames without taking off shutters from the frame exc 1.5 Sqm but n.exc 4.00 Sqm each complete all as specified and directed.

Taking down of chowkhats or frames without taking off shutters from the frame n.exc 1.5 Sqm complete all as specified and directed.

Taking down shutters exe 1sqm and n exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and not exc 2sqm each and refixing in the same opening after easing and adjusting complete all as specified and directed.

Supply and fixing 2nd class HW plain, solid, straight chowkats and frames,wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and fixing 35mm thick factory made plain framed, panelled shutters (two panel), 2nd class HW rail and style, with lock rail and panel of 9 mm B.W.P commercial ply with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated etc all as specified and directed by Engr in charge.

Material and labour 35mm thick 2nd Class Hard Wood as glazed and skelton shutters open rebated and prepared to receive glass, gauze etc, edges of forming plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters with sash bars all as specified in SSR Part-I complete all as specified and directed.

Solid PVC door frame of size 100 x 45mm made out of 5mm wood grain printed PVC sheet reinforced with MS square/rectangular tube fixing in existing opening including & edges will be painted to match with prelam sheet necessary hold fast and concrete all as specified and directed.Make:- Sintex, Rajshree or as approved by GE.

Material and labour for factory made moulded door shutter 35mm thick , consisting of solid core single leaf flush door of 30mm thick, lipped with 15mm (5mm x3) thick x 30mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick PVC sheet of density 600 Kg/Cum Manufactured by an ISO 9001-2015 certified company . Termite proof, water proof and fire resistant moulded PVC sheet with 2, 4, 6 raised panel design in different plain and or prelam PVC sheet on other side after routing the moulding design on flush doooor & 2mm plain and or prelam PVC sheet on other side using rubber based adhisive on the PVC lipping etc. complete as per direction of Engr-in-Charge incl supplying and fixing in frame at site as per specication and apporved by GE etc complated all as specified and directed.

Supply and fixing powder coated (50Micron minimum thickness) aluminum frame for door ,windows, ventilators etc.with one or more rebates including joining cleat for fixing etc.fixed type/louvered window or ventilator without sash bar,aluminum including necessary joining cleats,glazing clips,rubber packing,anodised aluminum snap beading,screws, sliding rollers, Rubber gasket etc.compleate all as specified compleate all as specified. Note:a) Glazing shall be measured seperately. b) Item shall be paid as per weight of alluminium section.c) The rate quoted shall be inclusive of neoprene beading,glazing clips,screws, etc., as required which shall not be measured for arriving the weight.d)the rate shall be inclusive of the locking arrengement including complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area complete all as specified and directed.

Supply and fixing in Mild steel work as in window, balcony grills of Mild steel in Angle, flat, round or square bars etc., with ends of bars shouldered and/or riveted, and similar work conforming to Fe 290 Gde-E-165.for Servant balcony portion and including removal of existing wooden frame with wire mesh/net etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 4.8 mm thick plain glass n exc 0.5 sqm in each pane fixed to aluminium windows and iron frame complete all as specified and directed.

Supply and fix 4.8 mm thick frosted glass exc 0.5 sqm in each pane fixed to aluminium windows and iron frame complete all as specified and directed.

Supply and fixing 100mm butt hinges medium weight, cold rolled mild steel and fixed complete all as specified and directed.

Supply and fixing 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 200mm long complete all as specified and directed.

Supply and fixing extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and directed.

Supply and fixing 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.

Supply and fixing aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to aluminium frame including removing old wiremesh, complete all as specified and directed.

Supply and fixing aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick all as specified and as directed by Engineer- in- charge.

Material and labour preparation of new wooden surface synthetic enamel paint of two coats in any description, over 10 cm in width or girth, not otherwise described, over a coat of pink primer, specified and directed.

Material and labour preparation of new Steel surface synthetic enamel paint of two coats in any description, over 10 cm in width or girth, not otherwise described, over a coat of Red oxide, zinc chrome complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar an removal of debris out side MoD land.

Material and labour for brick work built in cement mortar (1:6) with sub class B bricks straight or curved on plan exc 6m mean radius complete all as specified and directed.

ASHOK CONSTRUCTION

RAJENDRA CONSTRUCTION

Garima Construction Co

Darpan Construction

S S ENTERPRISES

SHREE JAGDISH FURNITURE CO.