NIT No. 16 (21-22) Item No. 13

Dismantling of old 30HP pump set by removing electric connection and remove the common base frame, sluice valve and NRV from suction and delivery side by cutting old nut bolt with the help of gas cutter and manual labour and also removing the old cable from old starter as per site requirement

S/o horizontal split casing pump with CI impeller, Neck Ring and Casing (CI), Shaft & Sleeve SS-410, coupled with TEFC IE2 rating motor mounted on suitable MS Base Frame with coupling & coupling guard with following details: (1) Pump - Discharge-172cum/hr, Head-30 metre, RPM- 1450 size-100mmx125mm Make: Kirloskar/Mather & Platt/Djb approved make. (2) Motor - 30 HP/22KW, RPM-1475, make-CG/ABB/kirloskar/Djb approved make

S/o Nut bolts and washer of good quality sizes as per sample

S/o Neoprene rubber insertion sheet 50% synthetic. Make : Jyoti/National(DJB SOR 22.6.1)

Supply of spare Tyre for "TC" Tyre Type, Automatic Flexible Cushion coupling, max bore 70 mm, max speed 2750 rpm, HP Rating/100 RPM - 3.10, Code- TC/O/015 Make: -UNIQUE/FANAFLEX/ FENNER. (DJB SOR 21.8.16)

S/o of Heavy-duty M S gap piece for suction & delivery side as per site requirement with fitting of 10 mm thick flange of respectively dia at each end

S/o CI/DF Non rising spindle sluice valve of size 200 mm, PN 1.0 IS:14846, CI body/SS410 Shaft construction. Make Kirloskar / IVC/ djb approved make

S/o CI/DF Non rising spindle sluice valve of size 150 mm, PN 1.0 IS:14846, CI body/SS410 Shaft construction. Make Kirloskar / IVC/ djb approved make

S/o CI/DF swing type non return valve of 150 mm size as per IS 5312 (part 1&2) PN 1.0 C I body, door/ bronze to rubber rings/ SS hinge pin construction. Make Kirloskar / IVC/DJB approved make(Djb SOR 4.9.7)

Making of RCC foundation of size 1.14Mtr x 0.508 Mtr x 0.15 Mtr by 1:1.5:3 concrete including providing fixing of 12 Nos. foundation bolt of size 25mm x 200mm i/c leveling & plastering.

Installation of above, pump sets, nrv and sluice valve with proper alignment and also making of all electrical connections i/c thumbing & tapping & fitting of valves. with the help of welding, gas cutter & tri pod etc as required on full load i/c cartage and testing on full load etc.

Devraj Enterprises

DEEPAK ENTERPRISES

M/S ARYAN TRADERS AND ENGINEERS

Raj Engineering Co.