Tender ID

Karnataka

Retender

Works

Buildings

Construction of Room to Anganawadi Center at SC Colony in Tegginabudihal Village in Ballari taluk & District under 2515-KKRDB (Micro Projects) for the year 2023-24 (Work Code BLY23262312849) ( Reserved for General Category)

Public Works Department

PWD Division Office Ballari | Karnataka

Amount: ₹12.2 LCloses: 7 Jun 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published31 May 2024
Closed7 Jun 2024
Retendered31 May 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 31 May 2024

Tender Value

₹12.2 L

EMD Value

₹30,500

Closing Date

7 Jun 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EXECUTIVE ENGINEER

Office Number

Work Description

Construction of Room to Anganawadi Center at SC Colony in Tegginabudihal Village in Ballari taluk & District under 2515-KKRDB (Micro Projects) for the year 2023-24 (Work Code BLY23262312849) ( Reserved for General Category)

Tender Information

Tender ID

PWD/2024-25/BD/WORK_INDENT10926

Reference Number

PWD/2024-25/BD/WORK_INDENT10926

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

PWD Division Office Ballari

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredKPWD Contractor Registration Certificate

RequiredAnnual Turnover Certificate for the last five years duly attested by the Notary or Government Gazetted Officer Submit the Originals at the time of Opening of the Financial Bid

RequiredExisting Commitments

RequiredSimilar Nature work i.e CONSTRUCTION OF BUILDING WORKS Done Certificate as Prime Certificate from competent authority not below the rank of Executive Engineer or equivalent duly attested by the Notary or Government Gazetted Officer and Submit the Originals at the time of Opening of the Financial Bid

RequiredPhysical and financial Implementation calendar format

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KP Procurement on or before the last date and time of bid submission.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KP Procurement portal due to internet connectivity issues and technical glitches at biddes end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka.

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27-07-2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted.

The Tenderer shall obtain the required work done certificates from the Competent Authority not below the rank of Executive Engineer or equivalent.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

The Tenderer shall scan Original Ownership Documents/ Lease/ Hire commitment Agreement for the Machineries and attach the scanned file to the Bid. The Original Documents shall be produced at the time of opening of technical Bids for physical verification.

The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever.

The tenderer shall maintain the Road/Building during the defect liability period.

The Department is not responsible for any delay in accessing kp procurement portal.

Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2024-25. And Value at 2024-25 price level, of existing commitments and on-going works to be executed during the next 12 months (Financial commitment of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2024-25) in the Technical Qualification Criteria mentioned in the next section.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation.

The star rates in respect of specified materials (Cement, Steel and Bitumen) shall be payable as per GO No: FD/3/PCL/2008 Bangalore Dated 21.11.2008.

The tenderer shall furnish required information in all formats. Scan and upload all Formats/Original documents required for this bid to the KP procurement portal. The Original Formats/Documents shall be produced at the time of opening of Technical Bid for physical verification.

The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion.

The Agency shall comply with ISO14001 (Environmental Management System) requirement during execution of work.

The time stipulated for completion of work is 4 (Four) calendar months including rainy season.

The defect liability period for the work is 12 (Twelve) calendar months.

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2019-20, 2020-21,2021-22, 2022-23 and 2023-24, (a) achieved in at least two financial years an annual financial turnover (in all classes of civil engineering construction works only) of Rs.13.00 Lakhs.

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2019-20, 2020-21,2021-22, 2022-23 and 2023-24, (b) satisfactorily completed as prime contractor, at least one similar work such as CONSTRUCTION OF BUILDING WORKS of value not less than Rs.6.50 Lakhs.

The tenderer shall note that, the increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

The tenderer shall note that, the GST at 18% shall be paid to the tendered amount separately.

Information on Existing commitments and on going works which are yet to be completed.

Information of the works for which Tender acceptance letters are received.

Information of the works for which Tenderer has submitted Tender.

Information on litigation in which the Tenderer is involved.

At the time of opening of Financial Bids, the Bidders shall furnish all the documents uploaded in original to this office for verification.

The tenderer shall submit an affidavit stating that he has not involved in litigation with Government, also he shall state that, amount of existing / on going works and amount of works awarded to him and yet to be commenced.

The tenderers shall note that as per the Government Order No.FD/850/EXP-12/15 dated 29-12-2015 and GO No.FD/130/EXP-12/15 dated 8-9-2015, the exemption from payment of EMD for Micro and small enterprises registered with NSIC under single point vendor registration scheme is applicable only for supply of goods but not for works.

The tenderers shall note that, as per The Karnataka Minor Mineral Concession Rules-1964, it is mandatory to submit the Mineral dispatch Permits (MDPs) issued by a competent authority, along with the bills. If not, penalty will be levied as per the prevailing clauses.

It is mandatory for the contractor to upload the work done certificate issued by an officer not below the rank of Executive Engineer duly indicating the work indent numbers for works costing more than Rs.5.00 lakhs

The tenderer shall upload Physical and financial Implementation calendar format before last date of tender receipt in the kpp portal.

The Tenderer or his identified sub-contractor should possess required valid electrical license for executing electrification works

Successful tender should have to obtain all mandatory clearances from Fire Services, Electrical Inspectorate, GESCOM Power Supply etc., before commencement of the work.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹30,500

Important Dates

Last Activity

31 May 2024

Published

31 May 2024

Download Ends

3 Jun 2024

Pre-Bid Meeting

1 Jun 2024

BOQ Preview

•

Construction of Room to Anganawadi Center at SC Colony in Tegginabudihal Village, Ballri Taluk, Ballari District, Under 2515 KKRDB (Micro) for the year 2023-24.

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...

•

Mix 1:3:6 Using 20 mm Nosminal size graded crushed coarse aggregates. Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basal...

•

M20 Design Mix Using 20 mm Nosminal size graded crushed coarse aggregates. Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coar...

•

Additionalities for Formwork, Centering & Scaffolding for Footings at 8% (Common SR for the year 2023-24 Volume-1 Page Nos. 111 SL. Nos. 1) ---- with all lead, lifts, loading, un-loading charges, incl...

•

Additionalities for Formwork, Centering & Scaffolding for Columns at 70% (Common SR for the year 2023-24 Volume-1 Page Nos. 111 SL. Nos. 9) ---- with all lead, lifts, loading, un-loading charges, incl...

•

Additionalities for Formwork, Centering & Scaffolding for Foundation at 5% (Common SR for the year 2023-24 Volume-1 Page Nos. 111 SL. Nos. 3) ---- with all lead, lifts, loading, un-loading charges, in...

•

M20 Design Mix Using 20 mm Nosminal size graded crushed coarse aggregates. Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigatio...

•

Additionalities for Formwork, Centering & Scaffolding for Plinth Beams at 50% (Common SR for the year 2023-24 Volume-1 Page Nos. 111 SL. Nos. 2) ---- with all lead, lifts, loading, un-loading charges,...

•

Additionalities for Formwork, Centering & Scaffolding for Lintels at 60% (Common SR for the year 2023-24 Volume-1 Page Nos. 112 SL. Nos. 14) ---- with all lead, lifts, loading, un-loading charges, inc...

•

Additionalities for Formwork, Centering & Scaffolding for Chejja at 45% (Common SR for the year 2023-24 Volume-1 Page Nos. 112 SL. Nos. 19) ---- with all lead, lifts, loading, un-loading charges, incl...

•

Additionalities for Formwork, Centering & Scaffolding for Roof Beams at 60% (Common SR for the year 2023-24 Volume-1 Page Nos. 112 SL. Nos. 14) ---- with all lead, lifts, loading, un-loading charges, ...

•

Additionalities for Formwork, Centering & Scaffolding for Roof Slab at 50% (Common SR for the year 2023-24 Volume-1 Page Nos. 112 SL. Nos. 14) ---- with all lead, lifts, loading, un-loading charges, i...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers Nost exceeding 20cm in depth, consolidating each deposited layer by ...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers Nost exceeding 20cm in depth, consolidating each deposited layer by ramming and...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Mix 1:2:4 Using 20 mm Nosminal size graded crushed coarse aggregates. Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basal...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding jo...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side ...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawin...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, ...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, pr...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off co...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth co...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, morta...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required s...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, g...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade wit...

•

Newly Constructed Roof / bathroom / Toilet / balcony / utility with Cementatius waterproof coating - below 500 m2 Providing and Applying CFTRI approved two component flexible polymer modified acryli...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel ...

•

Providing and fixing stainless steel fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 300 mm (PWD CSR For 2023-24 Vol 2 Pag Nos:218 Sl Nos.22.15.2) ---- with ...

•

Providing and fixing stainless steel fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16 mm dia 300 mm (PWD CSR For 2023-24 Vol 2 Pag Nos:218 Sl Nos.22.15.4) ...

•

Providing and fixing stainless steel fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolt 200x 10mm (PWD CSR For 2023-24 Vol 2 Pag Nos:218 Sl Nos.22.15.6) ----...

•

Providing and fixing stainless steel fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm (PWD CSR For 2023-24 Vol 2 Pag Nos:218 Sl Nos.22.15.8) ---- with a...

•

Providing and fixing stainless steel fixtures conforming to 304 graded steel as per direction of engineer in charge S Door Stopper 75 mm (PWD CSR For 2023-24 Vol 2 Pag Nos:218 Sl Nos.22.15.8) ---- wi...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Electrification

•

Concealed Conduit SystemSupplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concr...

•

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...

•

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (c...

•

Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch. Common Sr 2023-24 vol-6,pg no-5 ---- with all lead, lifts, loading, un-loading charges, including cost of all materials, cos...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Common SR 2023-24 vol-6,pg no-9 ---- with all lead, lift...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293Stepped Fan Regulator Two Module Common SR 2023-24 vol-6,pg no-9 Stepped Fan R...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Common SR 2023-24 vol-6,pg no-9 . ---- with all lead,...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socke Common SR 2023-24 vol-6,pg no-9 . ---- with all lead, lif...

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.6A Bakelite Ceiling Rose.Common SR 2023-24 Vol-6 page no-10 ---- with all lead, lifts, loading, un-loading ch...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Pendant Holder.Common SR 2023-24 Vol-6 page no-10 ---- with all lead, lifts, loading, un-loading charges, ...

•

Supplying and fixing regular 4 Way MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power facto...

•

Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of...

•

1.1 kV, XLPE or Heat resistant PVC

•

insulated, PVC exutruted Inner Seath

•

Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip

•

thickness and resistivity as per IS-3975 10 Sqm...

•

Supplying heavy gauge PVC conduit pipe 25mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceil...

•

Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bea...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

environemnt management system - regulatory requirements.doc

Others - Environmental Management System • 0.21 MB

Physical and financial implementation calendar .xls

Others - Physical and financial implementation calendar format • 0.10 MB

kppp_formats(new).xls

Others - FORMATS • 0.11 MB

buildingspecification.pdf

Others - Building specifications • 0.87 MB

10926 Gen kw-1.doc

Tender Document • 1.74 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

Construction of Room to Anganawadi Center at SC Colony in Tegginabudihal Village in Ballari taluk & District under 2515-KKRDB (Micro Projects) for the year 2023-24 (Work Code BLY23262312849) ( Reserved for General Category)

Public Works Department

PWD Division Office Ballari | Karnataka

Amount: ₹12.2 LCloses: 7 Jun 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published31 May 2024
Closed7 Jun 2024
Retendered31 May 2024