REPAIR TO DRAINS, FENCING, COMPOUND WALL AND GATES IN MD AND OTM ACCN IN DOMESTIC AREA AND MISC B/R REPAIRS IN MES INSTALLATION AT AF STN JAISALMER

Amount

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of drain pipes, or for manhole, etc., not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil all as specified and directed by Engr - in - charge.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified and directed by Engr - in - charge.

Removing excavated material nexc 50mtr and depositing where directed at a level n exc 1.5m above the starting point

M&L PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete including necessary formwork, all as specified and directed by Engineer-in-Charge.

M&L for brickwork in burnt bricks with sub class B bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4.

M&L for 10mm thick plaster in cement mortar (1:4 ) on concrete surfaces or masonry surfaces, finished even and smooth without using extra cement complete all as specified.

M&L PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) in coping, benching of manholes etc, and including necessary formwork and including demolition of existing PCC complete all as specified and directed by Engr - in - charge.

M & L pre-cast RCC 1 : 2 : 4, type B-1 (using 20 mm graded stone aggregate) in cover slabs for man holes etc, set in CM I : 6 complete all as specified and directed by Engr - in - charge.

M&L MS TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia all as specified and directed by Engr - in - charge.

Demolition of stone/brick masonry built in cement mortar including coping etc all as specified and directed by Engr - in - charge.

M&L for (Stone Masonry with Jaisalmer stone or Jodhpur Stone) Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6.

M&L for Flush pointing to to random rubble masonry, uncoursed or brought upto courses in cement mortar 1:4.

Excavating in post holes (or similar holes) in soft/loose soil ,each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F of mild steel in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

M&L PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete including necessary formwork, all as specified and directed by Engineer-in-Charge.

Dismantling expanded metal (Chain Link Fencing), not exc 4Kg/Sqm, any thickness or mesh, fixed with steel or wood fillets, if any.

Supply only of Chain link MS galvanisd fencing, any size or type.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

S&F of Tie bars for chain link fencing of any dia as directed by Engineer-in-Charge conforming to Fe?290 Gde-E-165..

S&F of Mild steel screw bolts (machine made) with neck dia between 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long.

S&F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors including required hinges for gates; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F of 2mm thick plain/diamond cut factory made polycarbonate sheet in any colour fix at site of any shape as per fixing requirement complete all as specified and directed by Engineer-in-Charge.

Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing the debries to distance not exc 50 m from site all as directed.

M & L reinforced Cement concrete in 1:2:4 type B1 using 20mm graded aggregate as in chajjas, balcony, roof pojection, slab supported on wall , etc all as specified.

M & L reinforced Cement concrete in 1:2:4 type B1 using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span, etc all as specified.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as binding with and including mild steel wire (Annealed) not less than 0.9mmdia or securing with clips

Use and waste of fair finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs,beam, cantilevers, bressummers, lintels, cooking plateform and similar work not exc. 200 mm thick.

Use and waste of rough finished form work to edge of concrete slabs, breaks in floors, etc exc 5 cm but not exc. 10 cm wide

Rough finished flat form work to Chajjas, beam, column, lintel, chullah hoods, water troughs and similar items including edges and formwork including necessary struts, scaffolding etc.

M&L for Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

M & L for removing of rust from existing steel surfaces with rust removrs of SIKA Rustoff 10 applied two coats @ 0.15Ltr/Sqm per coat and cleanng all rust with steel wire brush and washed with wter/chemical complete all as spd and dir by Engr-in-Charge. (Make- SIKA/BASF/FOSROC.)

M & L for application of Anti corressive coating with SIKA Rustoff friazinc on the exposed reinforcement proper mix applied @ 0.25 Ltr Sqm of exposed steel surface as per manufacture's instruction complete all as spd an dir by Engr-in -charge.(Make- SIKA/BASF/FOSROC.)

S&F galvanised welded steel wire fabric as extra reionforcement to RCC members like ceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste (wt not exc 4.00 kg/Sqm) complete all as specified and directed.

M&L for applying one coat of epoxy resin (FAIR BOND EP) on old concrete surfaces @ 0.30Kg/Sqm including preparation of surfaces as per manufacturer's instructions and applying 25mm thick (average thickness) of cement ,sand & Aggregate (1:1.5:3) in ratio aggregate n'less than 6mm size mixed with chloride free concrete plasticiser as per manufacturer's instruction with guniting applying manual and finished the surface even and smooth complete all as specified and directed.(Manual applied) Make : Fairmate chemicals or equivalent make of SIKA/BASF/FOSROC.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete.

M & L 15 mm thick rendering (INTERNAL) in cement mortar 1:6 on stone masonry surfaces of fair faces of brick or concrete surfaces, finished even and fair complete.

M & L 15 mm thick rendering (external) in cement mortar 1:4 on stone masonry surfaces or other than of fair faces of brick or concrete surfaces, finished even and fair complete.

M & L for rendering 10 mm thick on uneven faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and fair without using extra cement complete all as specified and directed.

M & L for prepariation of newly plastered surfaces and applying two coats of distemper oil emulsion (White or tinted) over a coat of chalk whiting on surfaces of walls complete all as specified and directed.

All as per item No 15 here - in - before but on ceiling.

M & L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls any colour as approved by GE.

S& F Ready made chajja with iron frame work and 2 mm thick polycarbonate sheet of wide 0.60 meter iclunding all fittings and fixture, drilled for fixing of steel sheeting or other covering ,including dismantling of existing any type of chajja, etc all as specified and directed by Engr - in - charge,

Demolition of stone/brick masonry built in cement mortar including coping etc all as specified and directed by Engr - in - charge.

M&L for precast cement concrete solid blocks ( 1:3:6 ) type C-I (using 20mm graded stone aggregate) exc 10cm in width as in block masonry built in CM 1:4 etc complete all as specified.

M & L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths)as in other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, complete

M&L for cutting holes into or through brick/stone walls built in cement mortar (nexc 400mm thick), superficial area exc 400 Sqcm nexc 0.10 Sqm and making good in cement mortar 1:3 or PCC 1:2:4: type B-1 as required.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n'exc 50m and making good distrubed surface for any type of soil complete all as spd and dir.

M & L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation for concrete post/struts complete all as spd anddir.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified

M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified.

S&F mild steel angle iron posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire,etc;flat iron fillets(for securing wire mesh etc) including all necessary drilling ,bolting or riveting,etc, and similar works conforming to Fe-410-0 or Fe-310-0.

S & F round tie bars 10mm dia conforming to Fe290 Gde E-165 let in and fixed independantely incl hooking ends for securing wire mesh chain link fencing as in bearing bars complete all as spd and dir.

Ditto all as per item no above but except bars

Dismantling chain link fencing wire, any type complete all as spd and dir.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed

Supply only MS Galvanized chain link fencing any size and type complete all as specified and directed

S&F mild steel screw bolts (machine made) with hexagonal or square head and one end screwed or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut, exc. 5 cm long & diameter of neck 5 to 10mm complete all as specified and directed .

S&F in repair galvanized, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized MS wire staples or steel pins etc as specified. (each line wire to be measured). complete all as specified and directed

All as per item no. above but Restraining resecuring including making good staples etc complete all as spd and dir

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L PCC/RCC1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching etc incl necessary form work complete all as specified and directed

M&L preparation of old steel surfaces of any description,n ' exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

Excavating in trenches n exc 1.5m wide and n exc 1.5 m in depth for foundation etc and getting out soft /disintigrated rock

M & L for Returning , filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm compete

M & L for Removing excavated soil n.exc 50m depositing where directed at a level n exc. 1.5 m as directed by Engineer-in-charge

M&L for 1:4:8 type D2 (40mm graded aggrage) cement concrete in foundation, filling and mass concrete.

M&L Loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells and plateform etc.

Demolition of cement concrete (unreinforced) above ground floors not exceeding 15 cm thickness complete all as spd and dir

M&L fo 60 mm thick precast interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS-15658-2006 laid and joints over sand cushion layer complete all as specified .

M&L for chequered cement concrete tiles 300mm X. 300mm x 20-25mm thick, set, jointed and pointed in near cement slurry in floor with grey cement and pigment including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

Dismantling of existing water proofing treatment, PCC works of any location up to existing Rcc slab by chiesling,drilling,scraping etc.complete all as specified and directed.

M&l for cutting out cracks to V-section in existing roofs or terracing ,cleaning out ,wetting,grouting with cement and sand slurry 1:3.

M&L for 10mm thick cement screed in cement mortar 1:3, including finishing even and smooth with out using extra cement to receive roof treatment, mixed with water proofing compound @3% by weight of cement over cleaned roof surface, as in grading to RCC roof surface,complete all as specified. Note - Water proofing compound shall be measured and paid separately.

Supply only Liquid water proofing compound STP No-1 Dr. Fixit or complete all as specified and directed.

M&L for water proofing roof treatment, consists of a five layered Atactic polypropylene modified polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including Bituminious primer @ 0.3 ltr per Sqm confirming to IS 3384-1986 on roof surfaces piror laying APP and a coat of bituminous aluminium primer @ 100 gm/Sqm on top, including sealing all joints by thermo fusion, complete all as per manufacturer's instructions.

M & L PCC (1:2:4) type B-O using 12.5mm graded stone aggregate as in Roof padding, roof kerbs of mud stops or similar work maintain proper slope as requred as specified .

M&L for applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrtlic polymers having sun reflectivity index (SRI) upto 105 on top of concrete roof in three coats @ 10.75 ltr/10sqm one coat of self primimg of elastomaric water proofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomaric water proofing liquid 500 micron after cleaning the surfaces complete all as spd and directed.

M&L for complete removal of existing treatment, filling up undulation and applying two layers readymixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces complete of wall

M & L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coats of cement base paint (tinted) on surfaces of walls any colour as approved by GE.

M&L for preparation of old painted wooden surface or wood based materials of any description, not otherwise described, over 10 cms widths or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

S&F repairs Vitreous china wash down water closet pan with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device. complete all as specified and as directed.

S&F repairs single piece Vitreous china wash down water closet pan with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device. complete all as specified and as directed.

S & F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified.

S&F in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed.

S&F repair viterous chaina half stall urinal flat back white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waster pipe) including providing and fixing plugh bedding Urinal against wall in CM 1:2 securing Urinal to plug with and including 60 mm long brass screw pointing around urinal back in cement etc including urinal spreader as complete all as specified.

S & F in repair 15 mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repairs 15 mm bore Fancy type pillar taps long neck/ swan neck, cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F in repair 15 mm bore Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed (AGUAR,Model No CON- 169KNB)or equivalent

S & F in repair fancy type chromium plated 15 mm bore angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S & F in repair fancy type chromium plated 15 mm bore two way angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S & F in repair PVC connections suitable for 15 mm dia pipe with PTMT nut of length 600 mm.

S&F in Repair hand shower (health faucet) (ABs body) with 8mm dia one meter long flexible tube in chrome finish incl wall hook & wall work incl fixing compl (Make : JAGUAR,Model No ALD-CHR-585)or equivalent

S&F CP Jet spray including flexible pipe 1.0 to 1.5 Rm length complete all as directed by Engr in Charge.

S & F in repair brass chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges.

Dismantling existing water tanks of capacity exc 500 & n.exc 1000 ltrs lowering from its position and removal to store. complete all as specified and directed.

S&F rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all specified and directed

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

S&F of Plates of Fe-290 (Gde E-165) (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Taking down chowkats/Frames of area n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) each. complete all as specified and as directed.

All as per item above but area exc 1.5 Sqm & n.exc 4 Sqm. complete all as specified and as directed.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of watertanks etc ant type of work complete all as specified and directed. Fe 410 -W (Gde- E- 250) quality-A

S&F Factory made 2nd class hard wood plain, framed , paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) , kiln seasoned and chemically pressure treated complete

S&F in repairs mild steel butt hinges medium weight cold rolled of size 100 mm. complete all as specified and as directed.

S&F in repairs extruded Aluminium alloy handle fabricated type, anodised of size 150mm. complete all as specified and as directed.

S&F in repair Aluminium anodised barrel tower bolt of extruded section of size 150mm. complete all as specified and as directed.

S&F in repaire 250 mm Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sloding bolt of extruded section or cast alluminium alloy of size 250mm. complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.80 Sqm in each panes fixed any bldg hight complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handles or steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamealle paint over a coat of pink primer. complete all as specified and as directed.

M&L Cement concrete 1:3:6 type C2 (40 mm graded stone aggregate) 75 mm thick in plinth protection/path and provided joints 10 mm wide & full depth at 3 m distance and every change of direction filled with sand and bituminious mix 1:3 complete all as specified and directed.

MARUDHARA CONSTRUCTION COMPANY (BID ID -3377237)

C K Industries (BID ID -3368614)

Bhawani Constructions (BID ID -3367031)

S K TRADER (BID ID -3376624)

M/S R B CONSTRUCTIONS (BID ID -3368355)

SUMIT ENTERPRISES (BID ID -3376550)

KHUSBU CONSTRUCTION COMPANY (BID ID -3368757)