REPAIR TO JOINERY, PLUMBING, FLOORING AND ALLIED WORKS AT NIWARU UNDER AGE B/R NIWARU OF GE JAIPUR

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and refixing in same opening complete all as specified and directed.

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each and re-fixing in same opening after resecuring or easing complete all as specified and directed

Dismantling boarding, plywood etc of any description and in any position fixed with screws etc complete all as specified & directed.

S&F for 2nd class hard wood, 20 mm thick boardings, planed both sides and both joints are chamfered and boarding are matched fixed with screws fixed at any situtaion / position/height complete all as specified & directed.

M&L for 2nd class hard wood, plain, solid, straight chowkats or frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.

Cutting holes in stone masonry built in cement mortar for inserting hold fasts and making good dismantling portion in CM (1:3) or PCC (1:2:4) type B1 as required exceeding half brick but not exceeding one brick complete all as specified & directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges, large hasps and staples; chains, hand made sliding bolts; clamps, hold fasts, wall ties; hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed

M&L for preparing surfaces of small steel articles such as hold fasts etc area not exceeding 0.10 Sqm each with tar or coal tar black paint complete all as specified & directed.

S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing given in SSR Part-I complete all as directed and specified.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick(stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on backface, supplying and fixing in frame at site as per specification complete all as specified and as directed.

S&F Pressed steel frames made of 1.25mm thick MS sheet for doors of size 105 mm x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

,--ditto-- all as per srl item No 14 above but size 165 x 60mm complete all as specified and as directed.

S&F Factory made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;drainage crossings, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

S&F 18 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed

S&F second class hardwood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area n.exc 3 sqcm complete all as specified and as directed

S&F magnetic ball catcher of approved make for cupboard complete all as specified and as directed

S&F 100 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc all as secified and directed by Engineer- in -Charge

S&F channel for sliding drawer, of approved make in cupboard all as specified and directed by Engineer -in- Charge

S & F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed.

S&F 30mm width of flaps (when open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 150 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed.

S&F 200 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed.

S & F 150mm long handles, extruded aluminium alloy, fabricated type anodised complete all as specified and directed.

S&F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for prearation of new steel surface of any description, over 10cm in width and girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide (zinc chrome) primer complete all as specified and directed.

M&L for preparation of new wooden or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden or wood based surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal/aluminum frame including punching or drilling out old glazing pin/spring/ clip complete all as specified and directed.

S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty/screwed in square n exc 0.5 sqm in each pane complete all as specified and directed

S&F 4.8 mm thick sheet glass, ordinarily quality and glazing with oil putty/screwed etc in square exceeding 0.50 Sqm each pane complete all as specified and directed

S&F in repair Door closer aluminium (extruded section body) hydraulically regulated designation No-2 universal type suitable for door shutter of 701 to 850mm in width and of weight and of weight between 36 to 60 kg as complete all as specified and as directed by Engineer in Charge. .

S&F in repair wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples fixed in steel door or aluminium window, size of mesh 12mm complete all as specified and directed by Engineer in charge

S& F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, ceiling incl raking out joints hacking for key scrubbing down with water and removal of rubbish off outside complete all as specified and directed.

M & L for rendering 10 mm thick on brick masonary surface or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of Acrylic washable distemper of approved shade/tint over a coat of primer on walls and as directed by eingineer in charge

M&L rendering 5 mm thick in CM 1:3 as on concerete surface of ceilings finished even and smooth without using extra cement complete all as specified and directed .

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Complete removal of existing treatment from old wall surfaces by scrapping, washing & applying two coat of Oil bound distemper of approved make on wall over a coat of wall priming paint over a coat of putty on plastered surface and filling the surface imperfections such as holes, dirt, fine cracks all complete including preparation of surfaces all as specified and as directed.

Complete removal of existing treatment from ceiling surfaces by scrapping, washing & applying two coat of Oil bound distemper of approved make on ceiling over a coat of priming paint and as directed by Engineer in charge

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square / rectangular) polished, area of each tile n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed.

M&L Glazed ceramic coloured tiles 300x200x7 mm thick on vertical surfaces such as skirting, dados and risers to step, wall etc set & jointed in neat cement slurry & pointed in white or coloured cement to match over and incl backing coat 10 mm thick in CM (1:4) complete all as specified and directed

M & L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring and all other similar works finished even and smooth without using extra cement complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) finished even and smooth w/out using extra cement complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.

Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick masonry surfaces or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floor aprons etc laid bedded and pointed in any mortar complete all as specified and directed .

M & L rubber moulded machine pressed precast concrete interlocking paver block, coloured, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with coloured cement and pigment laid over and incl 25mm thick sand cushion layer complete all as specified and as directed. Note : Sand for cushioning shall be included under quoted rates.

S & F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks tripple layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe including 25mm dia ball brass valve with polythelene float and fly nut and dismantling old tank all as specified in SSR Part I and directed by Engr in charge.

S & F in repair 1000 Ltrs capacity rotational moulded polyethylene water storage tanks tripple layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe including 25mm dia ball brass valve with polythelene float and fly nut and dismantling old tank complete all as specified in SSR Part I and directed by Engr in charge.

Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed

Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. incl trap set in cement concrete complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level or high level 10 ltr capacity, white, with intel, ball valve, float and handle including brackets, flushing pipe complete all as specified & directed.

S&F in repair 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified & directed.

S&F in repairs 15 mm bore bib tap, fancy type chromium plated cast copper alloy with cruth or butter fly handle screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 15 mm bore two way bib tap, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm angle valve, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 32 mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repairs 15mm bore pillar tap, long body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, high pressure with or without lettered 'Hot' or ' Cold' with long screwed shank and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore stop valves, cast copper alloy fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550x400mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling, waste pipe complete all as specified and directed by Engr-in-charge.

S & F in repair 15mm bore wall mixer, brass, chromium plated, fancy type for mixing hot & cold water, with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm x 125 mm size with or without swivel joints, including fixin to steel pipe or union complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

M & L for PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repair PVC (SWR) gully trap 100/150 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F in repair 110 mm PVC (SWR) bends any radius with access door including taking down complete all as specified and directed.

S & F in repair 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed.

S & F in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed.

S & F in repair for Pipe Supporting Clamping for Single Pipe of dia 110 mm (4") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 250 mm (10") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10") - 1 No.; 3. U Bolt Rubber sleeve mounted for 110 mm (4") CI or PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2") - 4 nos.

S & F in repair 110 mm PVC (SWR), junction single, (Single T) equal or unequal with acess door including taking down complete all as specified and directed

S&F in repair PVC (SWR) reducers (110x75 mm) complete all as specified and directed

M&L for disconnecting existing tanks having capacity exc 250 ltrs & n exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. Note : Cleaning repairing, etc. measured separately .

M&L for cleaning and removing all scale and dirt, etc, from tanks having capacity exc 250 & n exc 500 ltrs and from mouths of circulating pipes etc. complete all as specified and directed.

Vertical Expansion Joints i) Cleaning of concrete surface (up to Motherslab ) on both side of the expansion joint to remove any dust, oil, grease including removal of laitance and cleaning the inside of the expansion joint with compressed air. ii) Providing and applying the base coat of epoxy adhesive on both sides of the joints as per the width of the Sikadur Combiflex SG Tape. Product: Sikadur combiflex adhesive Consumption: 0.7 kg/m (strip width 200 mm) Product requirements: mixed density: 1.75 kg/ltr; bond strength > 1.5 N/mm² iii) Providing and applying flexible FPO based tape 200mm x 2mm as per manufacturers’ method statement (for 100mm or lower joint size) iv) Providing and applying top coat epoxy adhesive and finishing the adhesive by tapering the edge while completely sandwiching the Sikadur Combiflex SG tape within as per manufacturers’ method statement. Product: Sikadur®-Combiflex® (SG System Sikadur combiflex adhesive) Consumption: 0.7 kg/m (strip width 200 mm) Product requirements: mixed density: 1.75 kg/ltr; bond strength > 1.5 N/mm² v) Providing and applying masking tape and backer rod vi) Providing and applying polyurethane based joint sealant Sikaflex 127 by caulking gun as per standard method statement including tooling, finishing in a convex profile etc. (Joint Size on finished area 20mm) Make : Sika, Fosroc, Dr fixit or equivalent as approved by GE

S & F in repair 12 mm thick prelaminated HDHMR (High density high moisture resistant) board one side white laminate and other side decorative as in Sink/ Wash Basin cabinets fixed with minifix hardware where ever required including edge band of matching colour on exposed surfaces of board fixed with polymaster adhessive including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as specified and directed.

S & F auto close hinges, stainless steel of grade SS-304, bright finish and fixed complete all as specified. Make : Godrej, Hindware, Lifetime, Hettich or equivalent

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ