Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC 1040 12 3 BABA KARAM CHAND STREET NEAR MAHANTA DI KOTHI DORAHA 141421 DISTT LUDHIANA PB | DORAHA | LUDHIANA | PUNJAB | 141421 | L1 | Accepted-AOC Being First Lowest | |
| 2 | L2₹37.0 L+₹1.5 L (4.37%)Rejected-Finance C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹37.4 L+₹1.9 L (5.49%)Rejected-Finance RM 01 RIDHISIDHI I SRI GANGANAGAR 335001 RAJ | SRI GANGANAGAR | SRI GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹39.1 L+₹3.7 L (10.5%)Rejected-Finance BHAGAT SINGH CHOWK SURATGARH 335804 DISTT SRIGANGANAGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L4 | Rejected-Finance Other Than First Lowest | |
| 5 | L5₹39.2 L+₹3.8 L (10.7%)Rejected-Finance | L5 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹79,000
Closing Date
29 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lalgarh Jattan
GE Lalgarh Jattan
PROVN OF CERTAIN RW AND MW AT LALGARH JATTAN MILITARY STATION
2022_MES_552823_1
8933-42/22-23
Open Tender
Civil Works
Item Rate
180 days
GE Lalgarh Jattan
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE Lalgarh Jattan
₹79,000
Yes
5 Nov 2022
19 Sept 2022
1 Nov 2022
19 Sept 2022
29 Oct 2022
14 Oct 2022
Amount
B/R Portion Excavation in trenches n.exc. 1.5m wide and n.exc 1.50 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out in getting out in sof / loose soil all as directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in foundation, filling & mass concrete or filling of sunken complete all as specified and directed by Engineer-in-Charge
M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, pillers etc.; all as specified and directed. Note : Reinforcement shall be measured and paid seperately.
M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in columns, pillers etc.; all as specified and directed. Note : Reinforcement shall be measured and paid seperately.
M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in beams, cantilevers, bressummers, lintels over 1.5m span; all as specified and directed. Note : Reinforcement shall be measured and paid seperately.
M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in Chajjas; all as specified and directed. Note : Reinforcement shall be measured and paid seperately.
M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like; all as specified and directed. Note : Reinforcement shall be measured and paid seperately.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish surface of concrete flat all as specified and directed.
M&L for formwork to sides of pillars, columns etc; rough finish surface of concrete square, rectangular or polygonal all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam hunchings, girders, bressummers, lintels, cantilevers, etc. also splays between floors and beams, etc. rough finish surface of concrete flat all as specified and directed.
M&L for formwork to chajjas, troughts and similar items including edges rough finish surface of concrete flat all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) rough finish surface of concrete flat all as specified and directed.
S&F for TMT bars (Fe-500D) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
,---ditto--- as per item No 13 above but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and directed.
M&L for brickwork with fly ash bricks, of old size bricks, straight or curved exc. 6 m mean radius built in CM (1:6) all as specified and directed.
M&L brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, buit in CM (1:4) all as specified and directed.
M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 on wall finished even and smooth without using extra cement all as sepecified and directed.
M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth with all as sepecified and directed. Note : WPC shall be measured and paid seperately
M&L for Roof treatment to RCC roof as follows:- (a) Cleaning the roof surfaces thoroughly using wire brusehes to remove sharp projections, cleaning joints, washing, drying and removing all dirt/dust to receive concrete padding/plaster etc. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC, finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP membrane,(mineral finish) reinforced with non woven polyster fabric, by torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by E-in-Charge. Make : STP Dr Fixit/Pidilite, Texsa India Ltd/Tikitar Dansona/Bengal Bitumen/ M/S TORCHTAR MEMBRANE Notes : (i) All joints and change in directions should be covered wih cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement/as per site reqmt and cured well before laying membrane by torching. (ii) All angles and abuttments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only. The name of firm shall be got approved from GE before carrying out the wk. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having fascilities for testing of membrane. (v) The guarnatee of treatment shall be for min 10 yrs reckoned from date of completion of whole wk.
M&L for rendering, 5 mm thick on brick work or concrete surfaces in cement mortar 1:3 on ceiling finished even and smooth without using extra cement all as sepecified and directed.
Supply only Integral waterproofing compound as specuified and directed by Engr-in-Charge.
M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces all as directed.
M&L for preparation of newly plastere surface of wall and applying two coat of cement base paint over a coat primer over surface complete all as specified and directed.
M&L for two coats of acrylic distemper on newly plastered surfaces of walls paint over 3mm thick wall care putty including preparation of surfaces all as directed.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conoforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.
S&F for 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as directed.
S&F for 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.
S&F 100 mm long butt hinge, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specidied and directed.
S&F 200 mm long aluminium anodised barrel tower bolt, of extruded sections complete all as specidied and directed.
S&F 150 mm long aluminium anodised handle, cast type complete all as specidied and directed.
S & F 300 mm, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specidied and directed.
S&F for 300mm ordinary rat tail rod pattern springs including roller and roller plate complete mild steel fixed complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer all as specified.
S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
,---ditto-- as serial item No 36 above but without glazing bars complete all as specidied and directed.
S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe 165 complete all as specified and as directed
M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, with preparation of new or previously untreated surfaces priming with one coat of read oxide & finish with two coats of synthetic enamel paint ordinary tint all as spefified and directed
Returning, filling in, including spreading levelling including watering & well ramming in layers n. exc 25 cm any type of soil complete all as specified and directed by Engineer-in-Charge
Removing excavated materials n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge
M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick,watered and rammed to a true surface in Broken stone or boulders (15cm compacted thickness) complete all as specified and directed by Engineer-in-Charge
M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.
M&L for 75mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.
M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bedding in cement mortar 1:6, all as specified and directed.
M & L Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed
M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for joint free Glazed Ceramic coloured tiles of size 350 X 250 X 7 mm / 450 x 350 x 7 /600x600 x7 mm thick mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.
S&F vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests (excl flushing cistern) but including CI 'P' trap set in and including concrete fixed complete all as specidied and directed..
S&F PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle and telescopic pipe and connection to pipe and flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern all as directed.
S&F vitreous china wash hand basin coloured Flat back of size 550x400mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap all as specified .
S&F pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed.
S&F bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule all as specified.
S&F brass stop/angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup fixed all as specified.
S&F CP brass stop valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup (Concealed type) fixed all as specified.
S&F shower rose, 125 mm size, brass chromium plated with sweivel joint all as directed.
S&F PVC connections 15 mm size with PTMT nuts of length 600 mm all as directed.
S&F for Rotational moulded polythene water storage tank 500 ltr capacity vertical with closed top hoisted and fixed in position all as specified in SSR part-I. All as directed.
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed in repair all as specified and as approved by GE/Engineer-in-Charge.
S&F ball PTMT valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm dia bore pipe all as specified and directed.
S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.
,---ditto--- as serial item No 64 above but 20mm dia pipe.
S&F 32 mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors all as directed.
S & F 100 bore of spun cast, cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast iron complete all as specified and directed.
S & F 100 bore of spun cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and fixed to wall and including clamps, out of 50mm by 5 mm flat and 16 mm dia round iron stays, complete all as specified and directed.
S & F 75mm bore of spun cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast iron complete all as specified and directed.
S & F cast iron 100 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S & F cast iron 75 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S & F cast iron 100 mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S & F cast iron 100 mm bore vent cowl complete all as specified and directed.
M & L for 75 mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) complete all as specified and directed.
M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.
M&L Machined pressed precast concrete interlocking paver block glossy with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with over Fazilka sand cushion all as specified and directed. (Sand will be measured and paid seperatly)
Suply only Fine aggregate (sand) for Cushioning (Fazilka sand) all as specified and directed
Supply and laying DWCPE (SN8) 150 (ID) mm diameter drain pipes as per IS-16098 (Part-II), laid in trenches and including over 100 mm moorum bed to required slope, including all accessories/fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge. Note: DWCPE pipe should be ISI marked as approved by Engr-in - Charge.
M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in benching / haunchig of manholes including forming channels including necessary formwork etc.
M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in coping and the like including weathering slightly rounded or chamfered angles and throating, as directed including necessary formwork etc.
M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set cement mortar 1:6 as in cover slabs (for manholes etc), chajjas, shelves and similar articles with plain faces all as directed
S&F 25 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.
S&F for stainless steel rods, standarad quality, not less than 28mm dia with heads, brackets and boths ends stainless caps , etc. all as specified and direced.
M & L for 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska and cut and polished and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and conforming to Fe 410 -W (Gde- E- 250) quality- A.
Surface excavation N.exc. (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil.
S & F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc and laided, bedded and pointed in any mortar complete all as specified and directed.
Taking down cement plaster/terrazoo on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed
M & L for wax polishing to existing kota stone flooring including cutting complete all as specified and directed.
S&F for Rotational moulded polythene water storage tank 1000 ltr capacity vertical with closed top hoisted and fixed in position all as specified in SSR part-I. All as directed.
S&F for Rotational moulded polythene water storage tank 2000 ltr capacity vertical with closed top hoisted and fixed in position all as specified in SSR part-I. All as directed.
Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe all as directed.
,---ditto--- as per item No 94 above but 20mm dia pipe.
M & L for PCC 1:2:4 type B-2( 40 mm graded stone aggregate ) Cement concrete in foundations, filling and mass concrete complete all as specified and directed.
Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 sq. m but n.exc 4.0 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed.
S&F for powder coated aluminium frame/shutter for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. Make of Al Section : Jindal / Hindalco / NALCO
S&F for powder coated anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sections weighing exc 0.55 Kg/m (1.50 to1.80mm th) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings Make of Al Section : Jindal / Hindalco / NALCO
M&L for 4.0 mm thick figured glass, ordinary quality and glazing with aluminium snap beading of any size in each panes all as specified and directed.
M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set cement mortar 1:6 as in cover slabs (for manholes etc,) chajjas, shelves and similar articles with plain faces all as directed
M&L for 20 mm thick Z black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
Demolition of plain cement concrete of any description and in any position not otherwise specificlly provided for (reinforcement cut as required to facilitate demolition) all as specified and directed..
M&L for water proofing treatment to RCC sunken slab as specified below and directed (a) Cleaning the surface with wire brush/coir brush, removing all loose materials like dust particles, dirt etc (b) Applying 15 mm thick plaster in CM 1:3 with WPC on vertical surfaces(c) Creating fillet coving of 50X50mm size with polymer modified mortar on the junction of slab and vertical surfaces (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces (e) Provn of glass fiber mesh of 2X2mm immediately on above coating (f) Apply second coat of two component modified polymer coating as per requirement (g) Cement concrete 1:5:10 over the coating as per requirement (h) Joining the sanitary pipes with the water proofing tape having ability of more than 1.5mm (i) Filling the gap between wall opening and sanitary pipe with non shrink cementanious grout complete all as specified Note : (i) The treatment shall be carried out as per the manufacturers instructions and as directed by Engr-in-charge. The name of firm shall be got approved from GE before carrying out the work. (ii) The plan area of floor and vertical surfaces shall be considered for payment (iii) PCC filling in sunken area will be measured and paid seperately
M&L for PCC (1:5:10) using 40mm graded stone aggregate as filling of sunken floors/bottom and side of wall complete all as specified & directed by Engr-in-charge.
Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required built in colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.
Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled doorshutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.
S and F 100mm long SS butt hinge of medium weight including necessary welding etc. to steel frame complete all as specified & directed by Engineer-in-charge.
S&F in repair towel rails 20 mm dia , D type, 60 cm long , made out of Aluminium complete all as specified and directed
S&F in repair chromium plated fancy type soap dish complete all as specified and directed
S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests (excl flushing cistern) but including CI 'P' trap set in and including concrete fixed.
S&F in repair vitreous china wash hand basin coloured Flat back of size 550x400mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap all as specified .
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm all as directed.
Dismantling of water tanks of capacity exc 250 and n.exc 500 ltrs and removing from site all as specified and directed.
Dismantling of cast iron pipes, jointed in cement mortar and taking out of trenches/wall if required upto 100mm dia complete all as specified and as directed by engineer-in-Charge.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured overalll as fixed along the cente line over fittings and accessories)
S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls all as directed.
S & F 75 mm bore of cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches and Oval access door complete all as specified and directed
S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and wall or roof for 100 mm bore of pipe complete all as specified and directed.
S & F stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and wall or roof for 75 mm bore of pipe complete all as specified and directed.
Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built incement mortor including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete al as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning soft soil, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
M & L for 100 mm bore Cast iron Nahani trap grating including jointing to waste pipe fixed incement concrete type B-1(1:2:4) complete all as specified and directed.
S&F vitreous china wash down water closet pan ( pedestal pattern), white but including CI 'P' or 'S' trap set and including PVC seat cover complete all as specified
M & L for construction of soakage well of size 1.8 m dia x 4.5 m effective depth, excavation, in any type of soil, foundation in PCC 1:3:6, wall of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC Cover slab im M-25 SFRC cover interconnecting pipe of RCC/DWC complete fillet with brick bats all as specified as per drg and directed by Engr-in-charge. Drg No. : ST/BPL/06 of sheet No. 1/1 dated 14/10/2005 (Details of soak well)
M & L for construction of on site conventional type septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft connection etc complete for 25 Users all as specified as per drg and directed by Engr-in-charge. Drg No. : TD/STR/10 sheet No. 1/1 dated 02/09/2001
S & F sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and washers and waste pipe including bedding in cement mortor on to dwarf wall or including fixing cantilever brackets and connecting union pipe , over all size 495mm x 420 mm, size, bowl size 410mmx330mmx160 mm complete all as specified and directed.
E/M Portion M&L for concealed Point wiring with two single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including galvanised modular shunk box with modular plate cover with locking sheet of required module for mounting switches, sockets etc for one light point controlled by one one way switch complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.
,---ditto--- as serial item No 130 above but for one ceiling/exhaust fan point controlled by one switch and regulator
,---ditto--- as serial item No 130 above but for one 3 pin switch socket outlet, 5 Amp on the same board with other switches.
,---ditto--- as serial item No 130 above but for one 3 pin 5 amps switch socket outlet point on independent board.
,---ditto--- as serial item No 130 above but for one bell/buzzer point controlled by one bell push.
,---ditto--- as serial item No 130 above but wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power point.
Supply and fix switch, modular switch, piano type, one way 6 amp, 1 module, 230/250 volts grade on top covers complete all as specified and directed
Supply and fix switch, modular switch, piano type, two way 6 Amp, 1 module complete all as specified and directed
Supply and fix switch, modular switch, piano type, one way 16 amp, 1 module, 230/250 volts grade on top covers complete all as specified and directed
S&F modular bell push 6 Amp, 1 module complete all as specified and directed.
Supply and fix modular socket out let multipurpose use, 2 in 1, 3 pin 5 amp, 2 module flush mounting type, 230/250 Volts grade, on top covers complete all as specified and directed
Supply and fix modular socket out let multipurpose use, 2 in 1, 3 pin 15 amp, 2 module flush mounting type, 230/250 Volts grade, on top covers complete all as specified and directed
S & F LED light fitting 1 x 20 W, 230 V integral sleek polycarbonate LED Channel with white acrylic cover incl making connection complete all as specified and directed
Supply and fix ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified and directed.
Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door including wooden board complete all as specified and directed
Supply and fix MCB single pole 240 volt 6-32 amps 10 KA, complete all as specified and as directed.
Supply and fix MCB SPN 240 volt 32 amp 10KA complete all as specified and as directed.
Supply and fix MCB TP & N 63 Amps, 10 KA complete all as specified and as directed.
Supply and fixing PVC Blanking Plates one way with internal lock complete all as specified and as directed.
Material & Labour for Sub Main Wiring with two run single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 10 Sqmm copper green colour earth wire all as specified and directed by Engr-in-Charge. NOTE-two run of 10 sq.mm & One run of 10 sq.mm & One run of PVC conduit with accessories shall be measured as One length.
Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6 mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level connected to 4mm GI wire mm dia by means of bolts, nuts, check nuts and washers complete including earthing pit, Chemical compound, Earthing lead 4mm GI wire dia up to 7.5 m, 20 mm dia medium grade GI watering pipe, G.I. protection pipe 40mm dia eath pit in PCC 1:2:4 type B-1 using 20 mm graded stone agggragate RCC pit cover including earth work complete all as shown electrical palte No-3 of SSR-2009 (Part-I) NOTE:- The unit rate shall include for excavation & earth work in any type of soil/strata, PCC 1:2:4 type B-I for pit & RCC 1:2:4 type B-I for cover with 8mm dia CTD Bar @150mm C/C both way, funnel with watering pipe 20 mm dia medium grade, 15mm dia light grade GI pipe up to 7.5 mtr long, wiremesh complete all as specified and directed.
S&F concealed sheet metal enclosure incl single pole and neutral with 02 Pin and earth plug and socket complete with 01 single pole 20 Amps 240volts MCB complete incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified as directed by Engr-in-Charge.
S & F LED building security light fitting 45 watt with epoxy powder coated sheet aluminium housing, with epoxy powder coated CRCA sheet steel grey tray, clear acrylic cover and accessories complete incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer after taking down old u/s one.
S/F Modular step type fan regulator 120 watt , 2 module complete all as specified, 2 module complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM . Five star rated with bushless direct current motor after dismantling old item deposite to MES store all as directed.
Supply and fix electric water heater, storage type steel body with steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. and taking out old water heater, old item deposite to MES store all as directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers complete all as specified and directed.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
PAREEK AND COMPANY
KHANNA CONSTRUCTIONS
M/S Shree Ram Enterprises
GOYAL ENTERPRISES
Aggarwal brothers and company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .