Electrification for Community Hall at Terisha

Amount

Wiring for light point , fan/ exhaust/call bell point/ amp socket point with 15 mm FR/PVC insulated copper cable in existing /recessed PVC conduit but without control switch, with out box as required.

Wiring for 16 amp socket outlet with 2.5 mm FR/PVC insulated coper conductor cable in existing recessed PVC conduit including sheet as required.

Supplying and fixing 0f 1 inch, ¾ inch pvc casing capping along the accessories in surface / recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 10 amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch ms box complete as required including connection.

Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutters and 20amp 240 volt single pole mounted in recessed including m.s box complete as required

Supply and fixing of combined 3 pin 240 volt 10 amp. Socket outlet with safety shutter and 10 amp. 240 volt single pole mounted in recessed including complete MS box complete as required.

Supply and fixing single pole and neutral sheet steel mcb distribution box 240 volt on surface recess complete with tinned busbar neutral link earth bar, tin bar, detachable glaud plates, double door interconnected including points etc. as required 8 way double door spn.

Supply and fixing of MCB of following poles in the existing MCB DB complete with connections testing and commission etc, as required. (A) Single pole 6/10/20 Amp

B) Double pole 63 amp

Wiring for changeover 63 amp and insulation with complete accessories and holes on the wall as required.

Supply of 1100 volt grade aluminum conductor KPLE insulated PVC sheath arranged complete as per specification as required 25sqmm, 3.5core.

Supply and fixing of the following light fixtures including all accessories like electronic ballasts coms etc, complete as required concealed/Tube lightning 20 watt 3000k, round LED Luminaries as per Philips.

Supply and installation of solar light with below condition. (i) Recommended light level for public area with dark surroundings 20-25 (ii) Solar street lightning system type integrated with single LED luminaries’ battry solar panel charge controllers, sensor, pole fixing and maintaining accessories. (iii) Luminaries maintaining height for recommended light level eg. pole height 6mtr. (iv) Layout for solar street light installation single side or staggered sided. (v) Recommended distance between street light 25mtr. (vi) Type of luminaries LED. (vii)Recommended voltage of luminaries for recommended light level 25w-30w design 100 luminaries. (viii) Lumens cut put at source 3000 lumens. (ix) Battery type and capacity lithium ion integrated with luminaries 30AM or ht. (x) Solar panel capacity 75w or for luminaire capacity. (xi) Solar charge controller settings 5A or as per capacity. (xii) Pole specification mild steel pole with weather proof coating. (xiii) Recommended sensors dush top dawn sensor and dimming. (xiv) Working temperature 25degree C and 60degree C. (xv) Civil work -E/w and cement concrete in M15 mix using 20mm crushed stone aggregate.{number of street lightening system be installed at various places.}

Fan Box with rod 500 grams G.I with holes for connection, submersed in concrete with connections as required. (A) 12 modular plate

(B) 6 Modular Plate

3 Modular Plate

M/S LEH STAR LIGHT