Development of Park in Village Bandhwadi, Ward 30, MCG

Amount

NS Item

-Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of G.I pipe jindal make 2”, ¾” & vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site with 2 years defect liability period free of cost to full satisfaction of engineer in charge.

-Multi Play activity station Covering Area: 30’L x 18’W It contains: FRP Spiral Slide 6mm thick inclined at 5’H – 1 no FRP Tube Slide inclined at 5’H – 1 no FRP Wave slide 6mm thick inclined at 5'H - 1 no FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3’H – 1 no. FRP Stair 3mm thick inclined at 3’H- 1 no FRP Platform Hex. Shape 5mm thick in 7’Dia – 2 no. FRP Leaf Canopy – 2 no. FRP Deer Figure on Leaf canopy – 2 no. FRP Fancy Railing Frog & Monkey Shape – 4 no. FRP Walking Bridge 7.5’ Long – 1 no. FRP Rock Climber at 5’H-1no. M.S Spring Climber – 1 no. M.S Zig-Zag Climber – 1 no M.S Chain Net Climber – 1 no M.S Climbing Ladder – 1 no M.S Station in which vertical m.s pipe is of 3” x12G of I.S.I Mark – 2 no Complete item with GST, Transportation, Installation with C.C & labor at site.

-NS item "Providing and Fixing of canopy in Dholpur stone of 12' dia 1. Base flooring - 4''x15'' = 452 sqft. 2. Side Cladding - 1''x18'' = 113 sqft. 3. Pillars with carving - 10''x10''x96'' = 8 nos. 4. Roof terrace at the top of pillars - 2''x18'' = 113 sqft. 5. Canopy beam lower - 7''x10'' = 75 sqft. 6. Canopy beam upper - 4''x15'' = 75 sqft. 7. Arch with carving - 3''x30'' 8. Including Brick work of base and excavation 9. Height of the canopy from the top of the pillar - 9' Including of all type loading unloading vehicle and all type fixing materials and labour & taxes.

-Providing and fixing 3/4"dia Hydrant connection

-Merry-Go-Round (4 seater): 5' Dia. Main frame is of G.I sq. pipe 2" x 2" x 14 G and having suitable handle & foot-rest is of G.I round pipe 3/4" x 12 Gauge. Central pipe is of G.I pipe 3" x 12 G which further supports with G.I pipe 1” x 12Gauge with heavy duty shaft 50 mm thick & ball bearing assembly. It consists of 4 no Chair made of Molded FRP Plastic in 3mm thick with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site including 2 years defect liability period free of cost.

-Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of m.s pipe 1” x 12 gauge & m.s rectangular pipe 65 x 25 mm box X 16 gauge as climbing steps which support with 1”.25 sq. pipe x 14 Guage with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

-(i) 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6 no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade. (ii) 12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel & frieze uniformly grinded spray primered, spray painted with P.U Paints. (iii ) 3 No. cast iron/frp base panel railing with frame Floral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with P.U Paint in required shade. (iv) One set of top frame with Double Finishing FRP Molded Plastic Sheet roof Top frame in m.s tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 4 mm thick with top & bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width in -Z- section on either ends fixed horizontally along the length between column pillars. Also it contain FRP Moulded Ball of 14”Dia x 2mm thick at the central top for its beautification. Each sheet enamel painted in red color. Each such sheet properly riveted to horizontal sheets. The complete item is fitting at site with installation. (Including all types of Taxes and other charges.)

-? 26.4.2 Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in all kinds of soils Area 1m x 1 m ? 26.13.6 "Digging of pits in all kinds of soil and refilling the same with the excavated earth mixed with well decayed FYM @ 30% of pit volume and insecticide for termite control (excluding cost of FYM and insecticide) Size of pits: 0.45 m x 0.45 m x 0.45 m = 0.091125 cum (Manure to be taken from Solid Waste Plant Bandhwari, Gurugram)" ? 26.18 Supply and planting disease free, healthy, vigorous, growing more than 75 cm height permanent shrubs in already prepared pits, supplied in 25 cm x 2o cm polybags, application of 10 ml chlorphriphos 20% EC termiticide each and watering through the tractor tanker ? 3.1.3 Carriage of manure from Bandhwari Plant (Average lead of 15 KM up to site of plantation) Quantity of manure required 0.091/3 = 0.03 cum. ? Add EPF 13% on 50 % cost considering as labour component ? Add ESI 3.25% on 50 % cost considering as labour component.

-Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame & vertical legs is of m.s pipe 2” x 12 gauge. It stays with m.s pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with m.s chain 6mm thick duly plated with ball bearing & m.s flat 6mm thick housing with suitable PU Primer & PU Paints.

-Gi pipe jindalB

-Hiring of labour as per DC rates

-Arm and ShoulderWheel:- Providing, and fixing Arm and Shoulder Wheel of size 130 X '1200 X 1350 mm make of Green Gym or Equivalet fabricated with main post of 140 mm dia and 3.0 mm thic rest of the pipes are 40mm dia and 2.5 mm thick all pipc made up of hot roiled tubular steel and hot dippe galvanized, and powder coated using Akzo Nobel c equivalent of 80-120 micron thick. All welding joints of pip are robotic welded with joints scalloped as necessary an dressed off removing sharp edges and burrs. Zinc prime paint to be applied at all welding points prior to finishink Padals shall be made up of Nylon alloy with rounded edg of prevent any impact of injury and seat to be made fror virgin LLDPE manufactured by rotational moulding wit minimum thickness of plastic 4.00mm, colourful and resistant environmental friendly. Bearing used shall b maintenance fire, duly oiled sealed and self lubricated mad bY reputed company to be approved by Officer -in-Charge Equipment to be fitted within built limiters to preven unwanted movements. All open ends of pipe to be colourel by GI/LLDPE caps for user safety. The equipment to b fixed on ground with concrete of minimum strength M2: nd J shaped welded bolts and once the concrete is set, ft ;he equipment on to it and cover nuts and bolts with the bas Mate cover, all complete as per direction and approval o -2,ngineer-in-Charge regarding material, shape of equipment olour on metal, seat and base cover plate and fixing o equipment etc.

-Providing and fixing mono block motor 1HP and make Texmo complete in all respect

-Providing and fixing of stainless steel main gate/Railing as per required design (SS304 Jindal make)

-Providing and fixing precast concrete benches L shape base support in grey cement thickness 100mm back height 1000mm front 450mm . Size 1500x100x50mm

-Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer

-Supply of RH Pipe 1" dia.

-Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary

-Providing an fixing of Gate valve for Hydrant connection.

-Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be' made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GULLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of

-sea saw 4 seater 8 lx5 5 Hw X 15 high frame of ms pipe 2 x 12 guage sittibg planks is of pipes and handle seats 4 nos. molded frp material

-Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete or minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base plate and fixing of equipments etc The rates are inclusive of all taxes like GST, Transportation, Installation in CC with defect liability period of 2 years free of cost to full satisfaction of engineer in charge complete in all respect.

Bidder Name

Amount

The Swachh Haryana Co op L/c multipurpose Society ltd(GSTN-06AAGAT8251P1ZT)

THE ROHINI COOP L&C SOCIETY LTD.(GSTN-NA)

The Swachh Haryana Co op L/c multipurpose Society ltd

The Swachh Haryana Co op L/c multipurpose Society ltd