PROVISION OF AREA DRAINAGE IN PRTC UNDER GE (NORTH) BANGALORE

Amount

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exc 1.5 m in depth and getting out hard / dense soil all as specified and as directed.

Material and Labour for Plain cement concrete, 1:3:6 type C2 using 40mm graded stone aggregate in Cement concrete in foundations, filling and mass concrete complete all as specified and as directed.

Material and Labour for precast cement concrete block masonry (1:3:6) type C1, (20mm graded stone aggregate) masonry with solid block exceeding 10cm in width and setting in CM 1:4 etc complete all as specified and as directed.

Material and Labour for Plain cement concrete 1:2:4 type B0, using 12.5mm graded stone aggregate as in coping etc, rounded or chamfered on edges complete all as specified & as directed.

Material and Labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work/block masonry or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends complete all as specified and as directed.

Material and Labour for precast reinforced cement concrete 1:2:4 type B1, (using 20mm graded stone aggregate) as in cover slab for man hole set in CM 1:4 complete all as specified and as directed.

Material and Labour for TMT bar 10 mm dia and over as in reinforcement, cut to length bend to shape including cranking and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exceeding 25 cms thick complete all as specified and as directed.

Removal of excavated surplus spoil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Material and Labour for Excavating over areas, not exceeding 1.5 m deep and getting out Hard/Dense Soil complete all as specified and as directed.

Material and Labour for Excavating over areas, exc 1.5 m but not exc 3m deep and getting out Hard/Dense Soil complete all as specified & as directed.

Material and Labour for Cement concrete in foundations, filling and mass concrete type D-2, 1:4:8 (40mm graded stone aggregate) complete all as specified & as directed.

Material and Labour for Reinforced cement concrete (design mix M-25 grade using 20mm graded stone aggregate) in Foundations footings, plinth beams, bases for columns, etc and mass concrete complete all as specified & as directed.

Material and Labour for Reinforced cement concrete M-25 (20mm graded stone aggregate) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified & as directed.

Material and Labour for Reinforced cement concrete M-25 (20mm graded aggregates) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including making 02 Nos weep holes at every 01m interval complete all as specified & as directed.

Material and Labour for Formwork flat to sides of concrete foundations, footings, bases of columns, and plinth beams and similar work vertical or to batter complete all as specified & as directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter (rough finished concrete of flat) concrete complete all as specified & as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; exceeding 200mm thick (Horizontal or sloping(rough finished concrete of flat) concrete complete all as specified & as directed.

Removing excavated material exceeding 1.50 km but not exceeding 5 km and depositing complete all as specified & as directed.

Material and Labour for Pre-cast cement concrete block masonry, type C1 1:3:6 (using 20mm graded stone aggregate) set in CM 1:6 with solid blocks, exceeding 10cm in width and setting in mortar complete all as specified and as directed.

Material and labour for 15 mm thick cement plaster in Cement Mortar 1:6 on other than fair faces of bricks or concrete surfaces and finishing the surface even and smooth (without using extra cement) complete all as specified and as directed.

Material and Labour for preparing newly plastered wall surfaces and applying Three coats of white wash complete all as specified & as directed.

M R CONSTRUCTIONS

Eeguchi Constructions

B5BUILDING SOLUTIONS

S SUDHAKAR

Aditya Associates

S S CONSTRUCTIONS