Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.1 LAccepted-AOC | L1 | Accepted-AOC SINCE L1 BIDDER | |
| 2 | L2₹35.1 L+₹2.3 L (7.08%)Rejected-Finance | L2 | Rejected-Finance SINCE NOT L1 BIDDER | |
| 3 | L3₹35.4 L+₹2.5 L (7.71%)Rejected-Finance | L3 | Rejected-Finance SINCE NOT L1 BIDDER | |
| 4 | L4₹37.2 L+₹4.4 L (13.3%)Rejected-Finance | L4 | Rejected-Finance SINCE NOT L1 BIDDER | |
| 5 | L5₹39.2 L+₹6.4 L (19.4%)Rejected-Finance 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L5 | Rejected-Finance SINCE NOT L1 BIDDER |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
23 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AMRITSAR CANTT
HQ CWE AMRITSAR OLD CANTT
WELCOME MAINT TO OFFRS MD ACCN UNDER AGE B/R-I AT NAMS
2022_MES_571702_1
CWE/ASR-79/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE NAMS
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE NAMS
₹1 L
Yes
4 May 2023
28 Dec 2022
25 Jan 2023
28 Dec 2022
23 Jan 2023
11 Jan 2023
Amount
Taking down old shutters of any description exc. 1.0sqm but not exc. 2.0sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5sq.m but not exc. 4sq.m each complete all as specified and directed.
S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
S&F made 30mm thick flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed.
S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with wood free solid board , 28 to 30 mm thick (stiles) with 2, 4 or 6 rised panel design with 5mm thick 3D wood laminated moulded PVC sheet Polyurethane painted on the front and back face with with 19 guage thickness usiing MS square tuning supplying and fixing of 19mm x19mm frame structure complete all as specified & directed Make:- rajshri Plastiwood or M/s Solutions New Delhi or M/s Kumar Arch Tech Ltd or equivalent bMRnd of other Make as approved by GE from list of makes attached with tender documents.
S&F Solid PVC Door frame of sizes 95mm x 50 mm made out of 5 mm laminted both side colour PVC sheet reinforcement with MS square tube,supplying & fixing in opening as per specification & drawing complete all as specified and directed
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.
M&L for rolled mild steel angle iron work as in door frames complete, drilled for fixing of hinges etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed.
S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed
S&F, stainless steel butt hinges of size 100mm complete all as specified and directed.
S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.
S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.
S&F,in repair, double action spring hinges, mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed.
S&F, in repair, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed
S&F, in repair, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed
S&F, in repair, extruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed.
S&F, in repair, extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.
S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed.
S&F, in repair, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed.
S&F, in repair, Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.
S&F, in repair, Mortice lock, brass, six lever, verticle type, size 100mm complete all as specified and directed.
S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F, in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair, 25mm dia, 1mm wall thickness stainless steel, fancy type,decorative curtain rod with decorative ball type brackets ( As per sample) fixed with wooden gutties complete all as specified and directed.
M&L for anodised aluminium powder coated framed work for door, window / vent /aluminium partition etc with one or more rebates incl jointed cleat for fixing etc incl taking down old frame of any type and making good to disturbed surface with cementconcrete 1:2:4/cement mortar 1:4 complete all as specified and directed.
M&L for anodised aluminium powder coated door shutters, aluminium section weighting 0.55kg/m , incl necessary 4.8mm thick sheet glass ordinary quality & glazing or PVC sheet joining with cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, handles, lock , 2 x aluminium handles 150mm, 3 x hinges , 2 x Aluminium tower bolts 150mm with each shutter of any type including taking down of old shutter and making good to disturbed surface with cement mortar in 1:4 complete all as specified all as specified.
S & F anodised aluminium powder coated window and ventilator shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary 4.8 mm thick sheet glass ordinary quality & glazing, aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.), rollers etc including taking down of old shutter and making good to disturbed surface with cement mortar in 1:4 complete all as specified all as specified.
S&F, 5.5mm thick, black tinted glass with nano coating panes fixed to aluminium doors/windows/vents with and including necessary rubber gaskets complete all as specified and directed.
S&F for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified
S&F 3mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified
S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified
Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed all as specified and directed.
M&L for 15-18mm thick black granite stone (of any type) machine cut, bedded and jointed with gray cement slurry and pointed with white cement with admixture or pigment to match the shade of stone in window cills, jams,cooking platform pillars etc.laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding and rubbing and polishing complete all as specified and directed.
M&L for plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken floors including demolition of cement in concrete (unreinforced) in ground floor and pavings any thickness (below or above ground level) complete as specified and directed.
M&L for 15MM thick rendering in CM (1:3) on brick or concrete surfaces in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick, finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. ( Note:- WPC measured separately)
M&L for Bitumen blown any grade , applied hot, two coats to concrete surfaces at the rate of 1.5Kg sqm per coat. Including polythene film, black , 50 micron laid in floors. all as specified and directed. ( Note:- WPC measured separately)
S&F GI tubing 40mm bore medium grade fixed to wall and ceiling or laying in floor as sunken spout all as specified and directed
M&L for plain cement concrete (1:2:4) type B-0, using 12.5 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges, coving, coved fillets of radious 75mm provided at junctions of roof and parapet/ vertical surfaces and like complete all as specified and directed.
M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.
M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as shutter for kitched cabinet and cup board shutter etc (withshelves and partitions) including necessary fitting & fixture as per manuacturer's i,e steel piano hinges, catcher, haps&staple 100mm long , Alu handle 100mm 02 Nos complete all as specified (Make / shade / design / size as approved by Enginner -in-Charge)
S&F stainless steel kitchen basket in various type of basket , plaint basket height , 4" Thali basket 8" height Cup saucer 4" heigt and perforated cutlury basket 4" height all as specified and directed.
S&F hattich chennel for basket sizes 46mm wide all as specified and directed
S&F stainless steel handle for basket size 6" all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
S&F Vitrified ceramic tiles light shade 9 to 10mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. complete all as specified and directed.
M&L for, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.
M&L for colour glazed creamic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as skirting, dados and risers etc. laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.
M&L for colour glazed creamic highlighter tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as skirting, dados and risers etc. laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.
M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.06 sq.m but not exceeding 0.11 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.
M & L for cutting chases, pinning in brick walls/ stone concrete block or slab walls , making good to facing where required using expended metal in required size and pointing in cement mortar 1:3 to ends or edges of landings , steps, cills, sunshades, shelves, lintels etc; and cutting chases for concealed water tubing or cocealed conduit wiring, etc and making good , cutting exceed 10 cm but not exceeding 20cm girth complete all as specified and as directed.
Grading & french polishing of old terrazzo flooring with granding machine and finished the surface even and smooth all as per directed .
M&L 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate as in leveling cource in roof finishes even and smooth with using extra cement complete all as specified as directed.
Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls , finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick in cement mortar 1:4 on fair faces of concrete as in ceilings and finished even and smooth without using extra cement complete all as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L for brick work with sub-class `B' bricks built in CM 1:4, straight or curved on plan exceeding 6 M mean radius using old size bricks in half brick thick wall etc. complete all as specified and directed
M&L for preparation of new plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper over 1 mm thick wall care putty on wall plastered surface complete all as specified and as directed.
S&F Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed
M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified.
M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified
M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of oil bound distemper on ceiling of (white /ivory / tinted or any colour ) complete all as specified.
M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of oil bound distemper on wall (white /ivory / tinted or any colour ) complete all as specified.
M&L for subsequent coat of distemper oil emulsion (white /ivory / tinted or any colour ) over one coat complete all as specified and directed
M&L for preparation of old decorated plastered or unplastered wall surfaces including brooming down or steel wire brushging, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of exterior emulsion paint (Apex of Asian Paints/Weathershield Projects of Dulux Paint or equivalent approved by GE complete all as specified and directed.
M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of cement based paint.
M&L for writing letters or figures (block, roman, Italic or Indian) not exc. 30cm high with synthetic enamel paint such as P-02 P-39 OTM etc ) , ground of 150 dia complete all as specified and directed.
M&L for writing letters Stops, commas, short lines, dashes, hyphens, brackets, etc. as directed with synthetic enamel paint complete all as specified and directed.
M&L for preparation of old wooden surface of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed. Make Sintex /Sheetal
Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed. make Sintex/sheetal
M&L for Demolition of reinforced cement concrete of RCC roof tank etc complete all as specified and directed.
M&L for 50mm thick cement concrete (1:2:4) type B1, using 20mm graded stone aggregate laid over roof as in platforms for water tanks, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.
M&L for cement concrete (1:2:4), type B-1, using 20mm graded stone aggregate in window cills, lintel band, bed block, copings and the like including weathering, slightly rounded or chamfered angles and throating, Including necessary form work complete all as specified and directed.
Supply only, integral water proofing compound. complete @ 3 % by weight cement roof and parapet/ vertical surfaces and like complete all as specified and directed.
S & F in repair 15mm bore gate / globe valves cast copper alloy screwed both end down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed bore of following size : -
S&F 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3 incl taking down old pipe complete all as specified and directed.
Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, incl taking down old pipe complete all as specified and directed
S&F 20 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3incl taking down old pipe complete all as specified and directed.
Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, incl taking down old pipe complete all as specified and directed
S&F in repair plastic seat cover white/coloured (as required at site) for water closet padestal pattern with flat bottom and steel chromium plated hinging device complete all as specified and directed. Make Jaquar/Perry ware/Hidware.
S&F, in repair, vitreous china floor mounted singel peace WC with PP soft close seat cover , hinges accessories set as per size 375x660x800mm with cistern fitting (including fixing bolts flush pipe) complete all as specified and directed. Make Jaquar/Perry ware/Hidware.
S&F in repair vitreous china wash down water closet pan Padestal pattern white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed.
Supply & Fix in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests.P or S Trap complete including provn of cement concrete bedding complete all as specified and as directed Make CERA/ Jaquar/Perry ware/Hidware.
S&F in repair viterous chinaware wash hand basin light colour/white of size 550x 400cm flat back or angle stay, brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets,32mm bore PVC waste pipe of appropriate length complete all as specified and directed Make Jaquar/Perry ware/Hidware.
S&F in repair 32mm bore Brass chromium plates bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified as directed.
S&F, in repair, 10 ltrs capqacity PVC valveless, syphonic action, type, flushing cistern, low level, white, inlet ball valve, float and handle including brackets and flush pipe to pipe or lever etc complete all as specified and directed. Jaquar/Perry ware/Hidware./Cera
S&F in repair PVC syphon kit suitable for low level flushing cistern complete all as specified and directed.
S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed. Make : Jaquar/Perry ware/Hidware
S&F, in repairs, brass, chromium plated tubular towel rack 20mm dia 60cm long between flanges as specified and directed. Make : Jaquar/Perry ware/Hidware
S&F, in repair, central hole basin mixer with extended spout 450mm long braided connection pipe (without popup) for iron pipe or for unions and fixed to 15mm bore pipe complete all as specified and directed. Make Jaquar/Perry ware/Hidware.
S & F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Make Jaquar/Perry ware/Hidware.
S & F in repairs Fancy type chromium plated 15 mm bore Angle/ plain Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S&F in repairs, stop valves, concealed type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed for 15mm bore of pipe.Make Jaquar /Cera
S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.
S&F, in repair, 1mm thick, stainless steel plate rack of size 900mmx600mmx200mm complete all as specified and directed.
S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.
S&F in repair 8mm dia brass, chromium plated health faucet (Hand shower) with 01 meter long flexible tube and wall hook. Make : Jaquar /Perry ware /Hindware complete all as specified and directed.
S&F, in repair, chromium plated glass corner (Corse) size 300mmx300mm complete all as specified and directed. Make Cera /Jaquar/perry ware /Hindware
S&F, in repair, chromium plated glass shelf of size 22" complete all as specified and directed.Make Cera /Jaquar/perry ware /Hindware
S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. As per of Make Prayag /Cera/Shakti
Supply only 32mm, waste fittings, brass chromium plated for basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
Supply only, PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
Supply in repair PVC waste pipe 32mm bore of size 750mm long complete all as specified and directed.
S&F, in repair, kitchen or laboratory sinks made of stainless steel 1mm thick including supply and fix 32mm bore CP waste coupling, plug, washer, 32mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30x30x3mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B-1 using 20mm graded stone aggregate and connecting union to pipe, over all size 915mm x 460, bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair hand shower 95mm round shape single flow (ABS Body chrome plated with rubit cleaning system complete Make Jaquar/Perry ware /Hindware
S&F in repair Towel ring round with round flange complete all as specified and directed Make:- Jaquar/Perry ware /Hindware
S&F in repair Soap Dispenser with glass bottle complete all as specified and directed Make Jaquar/Perry ware /Hindware
S&F in repair tumbler holder all as specified and directed . Make Jaquar/Perry ware /Hindware
S&F, in repair chromium plated tubular towel rail 20mm dia 600mm long Complete all as specified and directed.. Make Jaquar/Perry ware /Hindware
S&F, in repair, CP, soap dish holder complete all as specified and directed. Make Jaquar/Perry ware /Hindware
Supply & Fixed in repairs 15mm chromium plated single lever wall mixer 3-in-1 with connector for hand shower arrangementwith connecting legs, wall flannges and wall brackets for hand shower complete as specified and as directed. . Make Jaquar/Perry ware /Hindware
Supply & Fixed in repairs 15mm Sink Mixer plete as specified and as directed. . Make Jaquar/Perry ware /Hindware
S&F in repair continuous (Piano) Hinges mild steel,bright finish or electro galvanised width of flap (when open) 30 mm complete all as specified and directed.
S & F in repair satinless steel magnetic catcher complete all as specified and directed by Engr-in-Charge.
S&F in repair Door seal 4mm wide with Fibre Brush and metalic body complete. complete all as specified and directed.
S&F in repair Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm.complete all as specified and directed by Engr-in-Charge.
Petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed by Engr-in-charge.
Petty reapirs to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed by Engr-in-charge.
S&F in repair only 75 mm waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair 110 mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair Staniless steel wall Pegs set of six powder coated as approved by GE complete all as specified and directed
S&F in repair FRP sheet 2.5 mm thick manglore pattern with all fittings and fixing arrangement as per manufacturer instruction complete all as specified as directed.
Taking down copper / aluminium point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed
M&L for point wiring for one light /fan/ buzzer point controlled by one 6 Amp switch one way with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FRLS unsheathed and multi stranded copper conductor cable in existing PVC Concealed conduit 20mm dia 1.5mm thick for one light / fan point or bell point controlled by one switch (including cutting chases and making good the disturbed surfaces) and fixing new 3mm thick hylam sheet top cover, sheet screws and in old sunken boxes after removing old unserviceable plastic laminated sheet included 1.5 Sqmm stranded copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc . complete all as specified and directed for the following :- Note : The cost of Bakellite sheet is included in the quoted rate)
All as per item No 137 here-in-before but one three pin socket outlet 6 Amps independent board complete
All as per item No 137 here-in-before but one three pin 5 Amps socket outlet on the same board with other switches.
All as per item No 137 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 16 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper conductor connecting to common earth dolly complete.
Supply and Fixing in replacement switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed.
Supply and Fixing in replacement socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed.
Supply and Fixing switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed.
Supply and Fixing in replacement socket outlet 5 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed.
Supply & fixing in replacement for Ceiling rose, surface bakelite 3 terminal, 240 volts, 6 Amps with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size complete all as specified and directed by Engineer-in-charge.
Material and labour for replacement of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 10 Watt.
Supply and fixing of fan regulator electronic step type ,230 Volts, AC supply, suitable for ceiling fan any type/make/sweep, complete all as specified and directed.
Supplyand fixing in replacement of MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 6 to 32 Amps complete all as specified and directed
S & F in replacement of MCB 40-63 amps single pole with neutral, AC 230 volts complete all as specified and directed.
Supply and Fixing in replacement Bell push flush type 6 Amps one way 230 volts AC complete all as specified and as directed.
Supply and fixing in replacement of bell ding dong AC 230 volts complete all as specified and as directed.
Supply & fixing in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed.
Supply and fixing sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 ampere rated bus bar, 240 volts fixed sunk / flush to the wall with IP-43 and IK-09 protectioncomplete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement of MCCB 100 Amps , AC 415 Volts 16 KA 4 pole including making connections with suitable size of aluminium lugs all as specified and directed.
M&L in replacement of sub main wiring two run single core 10 Sqmm multi-strand PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 10 Sqmm as cotinuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed.
M&L in replacement of sub main wiring two run single core 6 Sqmm multi-strand PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 6 Sqmm as continuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed.
M&L in replacement of sub main wiring two run single core 4 Sqmm multi-strand PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 4 Sqmm as continuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed.
M&L in replacement of sub main wiring four run single core 10 Sqmm multi-strand PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 10 Sqmm as cotinuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed.
M&L in replacement of sub main wiring 2.5 Sqmm multi-strand PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 2.5 Sqmm as cotinuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed.
Supply and fix in replacement hylam sheet for mounting switches, sockets and switch boards as per existing make/ size including cutting for fixing switch, socket complete all as specified and directed.
Supply and fix in replacement GI Sunken Boxes of size 7 x 4 inch, 3x3 inch, 8x10 inch and 10x12 inch complete all as specified and directed.
Supply and fix in replacement Modular metal flush boxes including modular sheet for switches and sockets of sizes 4/6 module in MD accn complete all as specifed and directed.
Supply and fixing in replacement including taking out old Distribution board of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :- (a) MCCB 100 amps, 25 KA, TPN, 415 volts, 50 Hz = 01 No. (Note:- Out going MCB shall be measured and paid for separately)
Supply and fixing LED light fitting with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing in replacement of LED T-8 tube light fitting with single side connection polycarbonate LED tube rod 20W 4 feet 1 x 20 watt box type including rotary type bipin holder and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed.
Supply and fixing in replacement CT-2/CT-3 type wall light with polycarbonate globe, suitable for 10 Watt retrofit LED lamp B22 base.
Supply and fixing of LED security light luminaire 25 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP65 protection, better optics for uniform distribution with multiplte LEDs not less than 2 W each and having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Three core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed.
Supply and fixing of bulk head light fitting, 10 watt, energy efficient with lamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting complete including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.
Supply and Fixing in replacemnt of Modular switch 6 Amps one module 230 volts AC complete all as specified and as directed
Supply and Fixing in replacemnt of Modular socket, 6A 2/3 pin combined 2 module, 230 volts AC complete all as specified and as directed
Supply and Fixing in replacemnt of Modular switch 16 Amps one module 230 volts AC complete all as specified and as directed
Supply and Fixing in replacement of Modular socket 6A/16A, 2/3 pin combined, two module 230 volts AC complete all as specified and as directed
Supply and fixing in replacement Exhaust fan AC 230 Volts 200/230 mm ventilator DX high quality engineering plastic complete with louvers and shutters including cutting hole/ opening in wall and making good the disturbed surface as per existing complete all as specified and directed . ( For Kitchen/ bathroom)
Supply and fixing in replacement post top lantern LED type 15 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specifed and as directed.
Supply and fixing of modular switches, bell push, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed.
Supply and fix in replacement of LED bulb 9/10 Watt ,230 Volt supply ,complete all as specified and directed.
Supply and fixing of fan regulator step type one module / 2 module, 120w 230 Volts, 50 Hz, AC complete all as specified and directed.
M/s. Nirmal Singh
Mahajan Builder
BISHAN DASS
M/s Vijay Construction Co.
Santokh Singh and Associates
tarvinder singh
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .