REPAIR REPLACEMENT TO FALSE CEILING WALL PANELING WOODEN FLOORING JOINERY AND MISC BR WORKS TO BLDG OF SECTOR A UNDER AGE BR II OF GE 865 EWS

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description area not exceeding 1 Sqm each, complete all as directed by Engr-in-Charge.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as directed by Engr-in-Charge.

Taking down wooden shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm, easing and adjusting and refixing the same in same opening with old builder's hardware as required complete all as specified and as directed by Enginner-in-Charge.

M&L 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints, supplied and fixed plain fillets, square, rectangular or triangular in section clean swan, secured with nails or brads complete all as specified and as directed.

S&F Factory made 35mm thick IInd Class Hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed by Engineer-in-Charge.

S&F for factory made 35mm thick 2nd class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed by Engineer-in-Charge.

S&F for factory made 30 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass/gauge etc divided into squares, with plain , chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of door shutters as specified in SSR Part-I Section 8 clause 8.24 (a), fixed to chowkhat all as specified and as directed by Engineer-in-Charge.

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 150 mm long, complete all as specified and directed.

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 100 mm long, complete all as specified and directed.

S&F 150mm size aluminium alloy handles, cast type, anodized complete all as specified and as directed.

S&F 100mm size aluminium alloy handles, cast type, anodized complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed, complete all as specified and as directed

S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified and directed by Engineer-in- Charge.

S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames, 75 mm size, ISI marked, complete all as specified and directed by Engineer-in- Charge.

S&F 375 mm, ordinary rat tail rod pattern springs including roller and roller plate, fixed in repairs, complete all as spcified and directed.

Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed.

S&F Plain Sheet glass 3.00 mm thick, ordinary quality in steel or wooden frames and glazing with oil pane putty in squares not exceeding 0.5 Sqm in each pane, complete, complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs complete all as specified and as directed by Engr-in-Charge.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixed etc complete all as specified.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutter, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F Anodised aluminium powder coated (minimum 50 micron thickness) windows and ventilator shutter, side hung type with out sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 150 mm long peg stay (01 No), 100mm long (2 Nos) type B-21 hinges, 200mm long (1 Nos) suitable handles, 250 mm long aluminium Tower bolt (01 No), etc. complete all as specified and as directed.

Preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, fixed in repairs, complete all as specified and directed.

S&F Aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and directed.

S&F brass mortice lock four levers, vetrical type size 100mm or above in old or new position fixed in repair complete all as directed by Engr-in-Charge. Make : GODREJ/HARRISON/LINK/EVEREST

S&F Harrison rails, 25mm bore stainless steel, with fixing brackets, stops,rollers fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

S&F Floor door stopper 150mm long (length of cover plate) of alluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete, fixed in repairs, all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in scantling fixed with nails, framed and fixed including dismantling timber scantling 40 sqcm and over in section, in any position as in framed work complete all as specified and directed.

M&L for second class soft wood clean swan as in battens for grids of ceiling and lining, plain fillets exc 13 sqcm and n.exc 25 sqcm, square/ rectangular in section, secured with nails or brads to timber frame work including dismantlng fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in section complete all as directed.

S & F gypsum ceiling board 8 to 9 mm thick in 600 x 600 mm pannel designer ceiling tiles laminated with white colour PVC film on the face side and a metalised polyster film on the back side, conforming to IS-14862 type B category three including suspended false ceiling using E-grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm to be placed in the grid suspended by 4mm GI wire hanger to be fixed as per site requirement including taking down of old false ceiling complete. MAKE : EVEREST/ARMSTRONG/GYPROC

M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer's instructions, and fixed with decorative wooden beadings as per site requirement including taking down of wooden floor tiles/boarding any type/description complete all as specified and directed. Make and shade of tiles be all as approved. Make : Action tesa/Kajaria/Armstrong

M&L for 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws/nails to timber frame work as in walls complete including taking down old wall/ceiling board/ply wood all as specified and as directed by Engr-in-Charge.

9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws/nails to timber frame work as in ceiling complete including taking down old wall/ceiling board/ply wood all as specified and as directed by Engr-in-Charge.

M&L for 6mm thick ply wood (No of plys 05) BWR, type BB as in ceiling panelling fixed with nails to timber frame work, complete including taking down of old ply wood any type all as specified and directed.

Provn of wooden panelling on vertical surface of wall using following specifications including taking down old wooden panelling complete all as specified and directed:-

S&F 2nd class hard wood wooden gutties of size 25mmx25mmx 200mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 complete all as specified and directed.

S&F horizontal runner 2nd class soft wood (Kali at 120 c/c of sectional area exc. 13 Sqm and n. exc 25 Sqm clean sawn treated with two coats of creoste oil mixed with good quality pesticide for antitermite treatment

S&F 1st class soft wood (Deodar) boarding 12mm to 15mm thick as in wall panelling planed one side, wrought and other side clean sawn and applying two coats of good quality varnish on plain surfaces over a coat of primer mixed with good quality pesticide for antitermite treatment on the other side and fixed with screws/nails on wooden runners.

S&F 1st class soft wood (Deodar) decorative breading 40mm wide on top surface of wall panelling including two coats of varnish complete all as specified and directed.

PARIDHI CONSTRUCTION

SHUBHAM ENGINEERS & BUILDERS

Mehar Enterprises

M/S LEO TRADERS

M/S Praveen Kumar and Sons