Renovation of Restaurant at Hotel Holiday Home, Shimla (H.P)

Amount

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) incluidng carriage of materials within all leads lifts and heights.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of materials within all lead and lifts as per the diretion of Engineer in Charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). (In Sal wood) incluidng carriage of materials within all leads lifts and heights.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm Second class teak wood incluidng carriage of materials within all leads lifts and heights.

Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width of aperture 1.4mm in both directions with wire of Dia 0.63mm for doors, windows and celerstory windows with hinges and necessary screws. 35mm thick shutters in 2nd class teak wood incluidng carriage of materials within all leads lifts and heights.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete incluidng carriage of materials within all leads lifts and heights. 75x47x1.70 mm

Providing and fixing bright finished brass tower bolts (barrel type) of approved make (heavy duty) with necessary screws etc. complete : as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 150x10mm

Providing and fixing bright finished brass handles of approved make (heavy duty) with screws etc. complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. (a) 125mm

Providing and fixing toughened glass door, shutter with SS patch fittings of approved make including Complete as per drawings.Fixed glass ( toughened) 12 mm thick as per direction of the Engineer in charge including carriage of material in all lead and lifts. (Saint Gobian / Modi Guard)

Providing and fixing 150 mm bright finished brass hard drawn hooks and eyes including carriage of materials in all leads, lifts and heights.

Providing and fixing 35 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as per the direction/design of the Engineer-In-Charge including Stainless Steel butt hinges with necessary screws including carriage of materials within all leads, lifts and heights.

Providing and fixing 150 mm oxidised M.S. double acting spring hinges (Heavy Duty) as approved by the Engineer-In-Charge make with necessary screws etc. complete including carriage of materials within all leads, lifts and heights.

Providing, fixing & applying POP false ceiling consisting of frame G.I. channel main, cross and L & hanging member of heavy quality size & shape with wire gauge mesh. Apply P.O.P. to the expended metal of thickness 10mm thick finish smooth to line & level and design including carriage of material with all lead & lifts. complete to the entire satisfaction of Architect. make- sakarni, sriram .Curved surfaces including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. Adhar Shree/Sakrani/Shree Ram or equivalent make.

Providing and fixing 0.62 mm thick prepainted steel sheet in roofing (Tata Duroshine or equivalent make approved by Engineer-In-Charge) with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and fixing ridges or hips 60 cm overall with 0.62 mm thick prepainted steel sheets in roofing (Tata Duroshine or equivalent make approved by Engineer-In-Charge) with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and fixing valley 60 cm overall 0.62mm thick prepainted steel sheet (Tata Duroshine or equivalent make approved by Engineer-In-Charge) in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing & fixing 15 cm wide 45 cm overall semicircular prepainted G.I. sheet gutter with iron brackets 40x3mm size bolts & nuts with washers etc. including making necessary connection withrain water pipe complete as per design in 0.63 mm th. Sheet including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Supplying of class 33 Pre-laminated wooden floor HDF 12mm thick Density min 850 kg/m3 of class décor laminate min of 0.4 mm of overlay of melamine based paper with abrasion resistance cycle _>6000, impact Resistance IC in IC3 for 33th class, Scratch Residence EN438>3.5: satin resistance Class -5 thickness swelling _< 18% height difference max _>0.15mm with edge tolerance to 0.5-1.0 mm /mtr with underlay armor as desired 0.8-1.0 mm thick, surface soundness >1.25 N/mm.

Providing and fixing Door profile for prelaminated wooden flooring of Elegance/Green panel or equivelent as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing Skirting Readymade 2.4m length laminate flooring of Elegance/Green panel or equivelent as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

15 mm cement plaster 1:4 (1 cement: 4 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar foreign matters sand papered smooth to give final matter finish to the surface complete as per direction of Engineer-In-Charge including carriage of material upto all leads, lifts and heights.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer as per direction of Engineer-In-Charge including carriage of material upto all leads, lifts and heights.

Wall painting Two coats with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour as per direction of Engineer-In-Charge including carriage of material upto all leads, lifts and heights.

Melamine polishing on wood work (one or more coat) of approved shade and finish as per the direction of Engineer-In-Charge including surface cleaning of all dirt and dust ,sand papered smooth including a coat of wood filler including carriage of materials within all leads, lifts and heights.

Painting Two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade including carriage of materials within all leads, lifts and heights.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required including carriage of materials within all leads, lifts and heights. The Wire should be Havell's/KEI/Finolix make, Switch, Metal Box & modular plate shall be Havell's/Anchor Panasonic/Legrand/L&T make and PVC pipe should be Diplast/Polyplast/Setia make. Group A

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required including carriage of materials within all leads, lifts and heights. The Wire should be Havell's/KEI/Finolix make, Switch, Metal Box & modular plate shall be Havell's/Anchor Panasonic/Legrand/L&T make and PVC pipe should be Diplast/Polyplast/Setia make. Group C

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required including carriage of materials within all leads, lifts and heights. The Wire should be Havell's/KEI/Finolix make, Switch, Metal Box & modular plate shall be Havell's/Anchor Panasonic/Legrand/L&T make and PVC pipe should be Diplast/Polyplast/Setia make. Group B

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Legrand/L&T.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required including carriage of materials within all leads, lifts and heights.Make:- Havell's/Anchor Panasonic/Legrand/L&T.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix 4x1.5 Sq. mm.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix a) 2 x 6.0 Sq. mm.

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix

Wiring for circuit / sub-main with 2x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.10 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No. 10 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required including carriage of materials within all leads, lifts and heights. Make:- Anchor/Havell's/Greatwhite/Cona

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of materials within all leads, lifts and heights. Make:-Legrand/Havell's/L&T or as approved by the Engineer-in-charge. Double door- 6 way (8+18),horizontal type

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of materials within all leads, lifts and heights.Make:-Legrand/Havell's/L&T or as approved by the Engineer-in-charge. Double door-4 way

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of materials within all leads, lifts and heights.Make:-Legrand/Havell's/L&T or as approved by the Engineer-in-charge. Double door-16 way

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required including carriage of materials within all leads, lifts and heights. Make:-Legrand/Havell's/L&T or as approved by the Engineer-in-charge. a) Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required Triple pole & Neutral including carriage of materials within all leads, lifts and heights. Make:-Legrand/Havell's/L&T or as approved by the Engineer-in-charge. Cat-A.

Triple pole. Cat-A. 32A Make:-Legrand/Havell's/L&T or as approved by the Engineer-in-charge.

Supplying & fixing of LED downlight. HAVELLS SPARKLE PRO FIX SPARKLEPROFIXDLR 12W840MOD with LED Driver Havells LEDDRIVER12WS and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or It's equivalent as approved by the Engineer-in-charge.

Supplying & fixing of PICTURE / MIRROR LIGHT - HAVELLS ENDURALINEARNEOBS 10W LED840SPCWH and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or It's equivalent as approved by the Engineer-in-charge

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix 2 Pair

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required including carriage of materials within all leads, lifts and heights. Make:-Diplast/Polyplast/Setia 20 mm. dia (for TV/Tel wires)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/L&T/Legrand a) Telephone socket outlet, Modular

b) TV. Socket outlet, modular Make:-Havell's/L&T/Legrand

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/ L&T/ Legrand 2 modules (78mmx78mmx50mm) (For Telephone & TV Outlet)

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required including carriage of materials within all leads, lifts and heights. 1 run of cable (for Data, WIFI) Make:-Havell's/KEI/Finolix