Special repairs to Road at Chitnis Enclave Brichgunj Mil Stn and Special repair to Road from Bldg No P-315 Unit Run Canteen to P-312 Ration Store at Inf Bn No Two, Brichgunj Mil Station, Sri Vijaya Puram

Repair to pot holes any depth not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth making good applying tack coat at 5 Kg per 10 Sqm of Bitumin VG-10 and putting in SDAC of VG -30 as specified for required thickness as per Ground Condition and rolled with 8-12 ton power roller and compacted to required camber and gradient etc complete as specified and directed by Engr in charge.

M&L preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on black top surfaces and applying evenly a priming/tack coat with bituminous primer (VG -10) @ 5 Kg/10 Sqm with paving bitumen all as specified and as directed.

M & L for premix bituminuos macadam (consolidated thickness not more than 75mm )with 4% binder content of paving bitumen of grade (VG -30) by weight of total mix laid and rolled with 8-12 tonne power roller to required gradient and camber up to the outer edges of roads on existing black top surfaces complete all as specified and directed by Engr-in Charge.:- Note :- Cost of testing charges, materials and transportation etc for job Mix formula shall be inclusive in the unit rate and No extra payment shall be admissible on this account. Mix shall be obtain from hot mix plant and spreading shall be done by using mechanical paver only.

M&L Bituminous premix semi dense asphaltic concrete by job mix formula 40mm consolidated thickness with 5.5% binder content VG-30 by weight of total mix, by hot mix process and laid by mechanical paver,rolling with 8-12 ton power roller and compacted to required camber and gradient etc complete as specified and directed by Engr in charge.

M&L for preparation of road surfaces and applying termoplastic reflective paint in marking of minimunm 2.5mm thick single coat as in centre line and edge line road marking in white/yellow (approved colours) colour & shade of 150/100mm width using 'HOT MARK' termoplastic modern propelled road marking machine incl all ingredients such binder, glass beads, titanium dioxide, calcium carbonate inter fillers termoplastic requirement for glass beads shall be as per table No. 800.4 of MORTH specification incl spraying glass beads etc all as per manufacturers instructions and complete all as specified and directed.

Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in Charge..

M&L 15mm thick rendering on brick work or concrete surfaces in two layers of 5mm thick CM 1:4 including WPC over a coat of 10 mm thk CM 1:6 finsihed the surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in Charge..

M&L for 3 Coats of White Wash on newly plastered surface of walls including prepration of the surfaces etc.

M&L Moorum/red bajri filling in floors or pavings, laid in layers not exc. 15 Cm thick, spread and levelled including watering and ramming all as specified and as directed by Engr-in Charge.

S&F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed by Engr-in Charge.