Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹19.1 LAccepted-AOC | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹20.8 L+₹1.0 L (5.26%)Rejected-Finance | L-2 | Rejected-Finance other than L-1 | |
| 3 | L-3₹20.9 L+₹1.1 L (5.59%)Rejected-Finance | L-3 | Rejected-Finance other than L-1 | |
| 4 | L-4₹22.1 L+₹2.4 L (11.9%)Rejected-Finance | L-4 | Rejected-Finance other than L-1 | |
| 5 | L-5₹23.0 L+₹3.2 L (16.2%)Rejected-Finance | L-5 | Rejected-Finance other than L-1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
13 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj. Sujith Mohan, GE
Garrison Engineer 864 Enggr Wks Sec, PIN-913864,C/o 56 APO
Comprehensive maint works and other misc works for Zone B Md accn and OTM accn under AGE B/R-II at BB Cantt, Srinagar.
2023_MES_592017_2
864/WS-20/2023-24
Open Tender
Civil Works
Item Rate
180 days
B B Cantt.
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹50,000
Yes
21 Aug 2023
22 Jun 2023
15 Jul 2023
22 Jun 2023
13 Jul 2023
29 Jun 2023
Amount
Lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh and POP on top surface including removing old legging (if any) complete all as specified and directed
Description all as per Ser item No 1 above but internal dia 20mm, complete all as specified and directed
Taking down shutters not exceeding 1 sqm each all as specified and directed.
Taking down shutters exceeding 1 sqm and not exceeding 2 sqm each all as specified and directed.
Taking down frame with shutters (without taking off shutters from frame) not exceeding 1.5 sqm each all as specified and directed.
Taking down frame with shutters (without taking off shutters from frame) exceeding 1.5 sqm but not exceeding 4 sqm each all as specified and directed.
M&L for 2nd class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.
M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed
S&F 30mm thick 2nd class hardwood factory made glazed and skeleton door/window shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as directed.
M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing
S&F stainless steel butt hinges medium weight 100 mm size etc complete all as specified and directed.
Ditto all as per serial item No 12.00 described here-in-before but 75mm size.
S&F 150 mm size extruded aluminium handles fabricated type, anodised all as specified and directed.
S&F 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed.
S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy all as specified and directed.
S&F mild steel 300mm size ordinary rat tail pattern springs for door including rollers and roller plate complete all as specified and directed.
S&F 100 mm size Aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.
M&L for 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed
S&F in repairs Aluminium (die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering complete all as specified and directed.
S&F for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet (any pattern) 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for 0.63 mm galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L type or J type or cranked hook bolt, in roof, wall etc with grade of zinc coating 275 complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as specified and directed.
S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240complete all as directed
Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified.
M&L for wrought Second class hard-wood in scantlings frame work complete all as specified.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.
S&F Khatamband pattern false ceiling, design as approved by GE with ornamental wood work made out of 1st class soft wood (Deodar) including hangers/fillets/cornices and 12mm thick BWR plywood and finally finished with french polish (two or more coats) complete all as specified and as directed.
S&F 15mm thick 1st class soft wood Australlian wooden panelling fixed with toughened and grouted as wall panelling including fillets/cornices & 9mm thick plywood BWR fixing on walls and two coat of varnishing, polishing and preparation with sneezing complete all as specified and directed.
S&F Fibre glass reinforced translucent 2mm thick corrugated or plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.complete all as specified and directed.
M&L for 4mm thick size 600x600mm HPSC (High pressure steam cured) Pre Laminated self embossed texture designer board E-Board classic to be fixed and incl GI Based powder coated snap grid/section size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper with preparation of surfaces etc complete all as specified and directed.
M&L for 9mm thick plywood grade BWR type BB fixed with screws/ nails to timber frame work for wall panelling /flooring/ ceiling all as specified and as directed.
M&L for 12mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work all as specified and as directed.
S&F 1.5mm thick Decorative laminate type 1 of surface finish, colour and pattern including necessary fillets/ cornices as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
M&L for 2mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and sealed down with an approved adhesive all as specified and as directed.
S&F in repair 2nd class hard wood Plain fillets. square, rectangular or triangular in section, exc 6 & n exc 13 Sqcm, clean sawn, secured with nails all as specified and as directed.
S&F in repairs for wooden laminated flooring in strips of size 120 cm long and 20 cm wide and 6-8 mm thick, fixed with PVC sheet and cushion including fillets/cornices, laid over 12mm thick BWR plywood complete all as per manufacturer's instruction all as specified and directed.
S&F 8mm thick toughened glass, design as approved by GE complete all as specified and directed.
S&F in repair 12mm thick toughened glass for door with necessary long solid fancy handle, suitable hinges, locking arrangement, hydraulic floor spring as required, design as approved by GE complete all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners, joining cleat of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM etc complete all as directed.
S&F aluminium powder coating (minimum thickness of powder coating 50 micron) door/window shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each shutter, hinges, locking arrangement, anodised aluminium snap beading screws etc complete all as specified complete all as specified.
Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.
M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc complete all as specified and directed.
M&L for rendering 15mm thick cement plaster in CM (1:4) on brick work or concrete surfaces finished even and fair without using extra cement all as specified and directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded in any mortar complete all as specified and directed
M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including 15mm thick in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.
M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) dark shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:3 complete all as specified and directed.
M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15/ 20mm dia complete all as specified and directed.
S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore all as specified.
Description all as per srl item No 63 above but 20 mm bore pipe complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.
S&F 110 mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
Ditto all as per serial item No 66.00 described here-in-before but 75mm size.
S&F in repairs one piece Vitreous China wash down water closet pan with flush compact and PVC seat cover (closed pattern), connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylindrical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm/25mm (Minimum weight 210 gram) etc), incl dismantling existing water tanks, complete all as specified and as directed by Engr-in-Charge.
Ditto all as per serial item No 69.00 described here-in-before but 1000 ltr capacity.
S&F in repairs vitreous china under counter wash basin inclusive waste fittings, brass, chromium plated for basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and waster pipe etc complete all as specified and directed.
S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and waste pipes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm bowl size 410mm x 330mm x 160mm.
S&F in repair Vitreous China urinals, bowl type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.
S&F PVC ( SWR ) floor/nahani trap plain with grating including jointing with solvent cement of 75 mm dia etc complete all as specified and directed.
S&F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.
S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe) including PVC seat cover (closed pattern), connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.
S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including Flush pipe of polyethylene of low or high density or PVC. 32 mm dia all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.
S&F in repairs 125mm brass chromium plated shower roses including fixing to steel pipe etc complete all as specified and directed.
S&F in repairs vitreous china wash basin of size 550x400mm (flat back or angle back type) including brackets cutting for and pinning in ends of brackets or erecting stand inclusive 40mm waste fittings, brass, chromium plated for basins, waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and waster pipe etc complete all as specified and directed.
S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water (for WHB/sink) screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15mm bore Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floor & paving's n exc 15 cm thick below or above ground level complete all as specified and directed.
M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified.
M&L for 75mm thick PCC (1:4:8), Type D2 (using 40mm graded crushed stone aggregates) as in sub base or floors etc. complete all as specified and as directed.
M&L for rubber moulded chequered cement concrete tiles with grey cement cement and pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20 mm thick screed bed or bedding layer in CM 1:4, complete all as specified and as directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in brick work, masonry etc.
M&L for cement concrete type C2 1:3:6 (40mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer.
M&L for preparation of new plastered surfaces of walls, apply two coats of oil bound distemper over a coat of chalk whitening complete all specified and directed.
M&L for preparation of newly plastered wall surfaces and applied two costs of cement base paint over a coat of white wash all as specified and directed.
M&L for preparation of old plastered wall surfaces and apply one coat of cement base paint all as specified and directed.
M&L for preparation of old plastered wall surfaces and applying two coats of oil bound distemper all as specified and directed.
M&L for Preparation new wooden surfaces and applying two coat of synthetic enamel paint over one coat of pink primer surface of any description not other wise described over 10 cm width or girth complete all as specified and directed
M&L for Preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for Preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
S&F in repairs Harrison rails (curtain rails) , mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
S&F in repairs kitchen plate rack of 1mm thick stainless steel sheet of size 600mm x 750mm / 750mm x 900mm complete all as specified and directed.
M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new/old works with two or more coats complete all as specified and as directed.
M&L for special treatment to sunken portions of Toilet by demolition of existing treatment of any description and thickness, removal rubbish outside MD land, 10mm thick plaster in cement mortar (1:4) with water proofing liquid conplast 421 of make Fosroc or equivalent as specified and applying one coat of each Nittoproof 100 and Nittoproof 120 of M/S Fosroc or equivalent as specified on plastered surface and rendering again 10mm plaster in cement mortar (1;4) mixed with conplast 421 of M/S Fosroc or equivalent as specified in Sunken portion and CI pipe joints shall be filled/jointed with mixture of cement, fine, sand and Nittoproof 130 of M/S Fosroc or equivalent as specified and provide hole in the wall and fix 600mm long and 20mm dia GI spouts light grade and PCC (1:5:10) type E-2 using 40mm graded stone aggregate filling in sunken portions , floor area of WC& Bath upto 1.50 Sqm complete all as specified and directed.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed.
S&F in repair 15mm bore bib taps, brass chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F in repair glass corner shelve 30cm long with S/S railing complete all as specified and as directed.
M/S MAHIR MUNEER
M/S Tajamul Ah Buchh
M/S TAJ DIN KHARI
Alishan Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .