Repair and Renovation of Sanitary and Plumbing work of Bathrooms at Mini-Secrterait Arhama Shopian

Amount

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

Application of internal cement sand plaster of thickness 12mm with a cement sand mortar of mix 1:6 including scaffolding curing and including cost of cement,sand.Coarse sand

Providing and laying in position Reinforced cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2 :4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4 :8 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Providing and fixing 8 mm thick granite tiles gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade 8.2.2.1 Area of slab over 0.50 sqm

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460 mm bowl depth 200 mm

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

P/F of below mentioned CP fittings(Jaquar series) including c/o screws electric and machinery charges complete job..

I)P/F CP Brass Sink MIXER (jaquar/marc)

I)P/F CP Brass Wall MIXER (jaquar/marc)

I)P/F CP Brass Basin MIXER (jaquar/marc)

III)P/F CP Brass Bibcock (jaquar/marc)

III)P/F CP Brass Angle valve (jaquar/marc)

III)P/F CP Brass Nipples 15mm dia and 20 mm long

III)P/F CP Brass Grating

III)P/F CP Brass Soap case

P/F CP Brass Towel Rail with CP Brackets fixed to wooden cleats with CP Brass Screws 600mm

P/F CP Brass Toilet paper holder

P/F PVC CONNECTIONS 24" Length

P/F OF Health Faucets of specified Length of convoluted extension

P/F OF water flushing cistern of 10 litre capacity

IV)Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

refixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Supply, fixing, laying and jointing of GI Pipes of Variable daimeter with fittings like Elbows, Sockets, Tee's, Clamps, Plugs within the building i/c providing of Yarn at joints, inclusive eletric and machinary charge.

i) 15mm Dia GI Pipe(.5'inch)

ii) 20mm Dia GI Pipe (.75'inch)

iii) 25mm Dia GI Pipe (1.0'inch)

2. Supply, fixing, laying and jointing of various GI pipe fittings and water controlling devices of Variable daimeter i/c providing of Yarn at joints, inclusive eledtric and machinary charge.

i)ball valve (1")

iii)union (1")

v)Tank nipple (1")

viii)ball cock

Providing and fixing of water pump 1 H.P including starter and all accessories (compton greaves or Kirloskar make)

Providing,fixing,laying of sanitary soil and waste water PVC Prince B Pipes of variable diameter with proper alignment including jointing with solvent complete job.

i)160mm OD UPVC Prince B Type

i)110mm OD UPVC Prince B Type

i)75mm OD UPVC Prince B Type

supply and fixing of below mentioned PVC fittings in the sanitary system including jointing by solvent.

i)4"floor trap

ii) 4" p trap

iii) 4"door bend

iv)4"door T

v)4" Cowel

vi)4" cap

vii)3" door bend

viii)3" door Tee

ix)6" bend

X)3"floor trap

Providing and fixing of Building Hardware

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete

AlUMUNIUM Aldrops 300x16mm

AlUMUNIUM 6" Tower bolts

AlUMUNIUM 4" Tower bolts

AlUMUNIUM 5" Handles

AlUMUNIUM 4" Handles

Repairs OF STORAGE TYPE VERTICAL HOT WATER HEATER(Geyser) with copper container ,insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable,3 pin plug top,15mm dia PVC connections at the outlet(Venus)make.50 LTR. Capacity

Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete. 17.28.1 Semi rigid pipe 40 mm dia

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms.

Providing and fixing PTMT stop cock of approved quality and color 15 mm nominal bore, 86 mm long, weighing not less than 88 gms.

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 gms.

Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85gms.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.19.53.1 15mm nominal bore, 105mm long, weighing not less than 138gms.

PTMT Ball cock 20mm nominal bore, 120mm long, weighing not less than198gms.

PTMT Ball cock 25mm nominal bore, 152mm long, weighing not less than 440gms

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 15 mm nominal bore, weighing not less than 32gms

PTMT extension nipple 20 mm nominal bore, weighing not less than 40gms

PTMT extension nipple 25 mm nominal bore, weighing not less than 62gms

Engagement of muncipal sucker for evacuation of manholes and septic tanks including fuel oil and operating and disposal charges (complete job)

M/S MOHAMMAD IQBAL MALIK

M/S MOHD MAQBOOL MALIK