A) CSMT-Waterproofing to relay room at PF-07 KYN end at CSMT. B)CSMT- Renovation and repairs of officers and staff toilet blocks, corroded pipes and damaged downtake pipes at DRM & New Annex building under ADEN(W) CSMT. C)CSMT- Renovation and repairs of officer's rest house toilets at parcel building CSMT Mumbai. D)CSMT-Repairs to the damaged storm water drainage line near PF No-10 at CSMT.

Item- 04 Part C- DSR Item.

S No. Item No Description of Item Unit Qty Rate Amount

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

Providing and laying cement concrete in retaining

walls, return walls, walls (any thickness) including

attached pilasters, columns, piers, abutments,

pillars, posts, struts, buttresses, string or lacing

courses, parapets, coping, bed blocks, anchor

blocks, plain window sills, fillets, sunken floor

etc., up to floor five level, excluding the cost of

centering, shuttering and finishing:

4.2.3 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived cum 13 9375.2 121877.6

from natural sources : 4 graded stone aggregate

20 mm nominal size derived from natural

6.0 MASONRY WORK

Brick work with common burnt clay machine

moulded perforated bricks of class designation

6.3 12.5 conforming to IS: 2222 in superstructure

above plinth level up to floor five level in cement

mortar 1:6 (1 cement : 6 coarse sand) :

8.0 CLADDING WORK

Providing and fixing 18 mm thick gang saw cut,

mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity

counters, window sills, facias and similar

locations of required size, approved shade,

colour and texture laid over 20 mm thick base

cement mortar 1:4 (1 cement : 4 coarse sand),

joints treated with white cement, mixed with

matching pigment, epoxy touch ups, including

rubbing, curing, moulding and polishing of edges

to give high gloss finish etc. complete at all

Granite stone slab of colour black, Cherry/Ruby

Providing edge moulding to 18 mm thick marble

stone counters, Vanities etc., including machine

8.3 polishing to edge to give high gloss finish etc.

complete as per design approved by Engineer-in-

9.0 WOOD AND P.V.C. WORK

Providing and fixing 25 mm thick shutters for cup

Providing and fixing ISI marked flush door

shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction

9.21 with frame of 1st class hard wood and well

matched commercial 3 ply veneering with

vertical grains or cross bands and face veneers

on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel Sqm 14 2015.75 28220.5

butt hinges with necessary screws

COPER OXIDISED MILD STEEL FITTINGS (COPPER

OXIDISED AS PER IS: 1378)

Providing and fixing ISI marked oxidised M.S.

9.62 sliding door bolts with nuts and screws etc.

complete : (copper oxidized as per IS: 1378)

Providing and fixing ISI marked oxidised M.S.

tower bolt black finish, (Barrel type) with

necessary screws etc. complete : (copper oxized

as per IS: 1378)

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

Providing and fixing ISI marked oxidised M.S.

handles conforming to IS:4992 with necessary

screws etc. complete : (copper oxized as per IS:

9.72S BRASS FITTINGS

9.83 Providing and fixing aluminium die cast body Each 10 1025.65 10256.5

tubular type universal hydraulic door closer

(having brand logo with ISI, IS : 3564, embossed

on the body, door weight upto 35 kg and door

width upto 700 mm), with necessary accessories

and screws etc. complete.

9.105S GYPSUM BOARD PARTITIONS

Providing & Fixing decorative high pressure

laminated sheet of plain / wood grain in gloss /

matt/ suede finish with high density protective

surface layer and reverse side of adhesive

bonding quality conforming to IS : 2046 Type S,

including cost of adhesive of approved quality.

11.0 FLOORING

11.37S CERAMIC GLAZED TILES

11.37A Providing and fixing 1st quality ceramic glazed Sqm 336 938.5 315336

floor tiles conforming to IS : 15622 (thickness to

be specified by the manufacturer ) of approved

make in all colours, shades except burgundy,

bottle green, black of any size as approved by

12 Engineer-in-Charge in skirting, risers of steps and

dados over 12 mm thick bed of cement Mortar

1:3 (1 cement: 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm including

pointing in white cement mixed with pigment of

matching shade complete.

11.41S VITRIFIED FLOOR TILES

Providing and laying vitrified floor tiles in

different sizes (thickness to be specified by the

manufacturer) with water absorption less than

0.08% and conforming to IS: 15622, of approved

11.41 make, in all colours and shades, laid on 20mm

thick cement mortar 1:4 (1 cement : 4 coarse

sand), jointing with grey cement slurry @ 3.3 kg/

s q m including grouting the joints with white

cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in floor in

different sizes (thickness to be specified by the

manufacturer) with water absorption less than

0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade,

laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement

slurry @3.3 kg/sqm including grouting the joints

with white cement and matching pigments etc.

The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber

mallet for placing the tiles gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

12.0 ROOFING

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

Providing, fixing and embedding sand cast iron

accessories for rain water pipes in the masonry

12.40 surrounded with 12 mm thick cement mortar of

the same mix, as that of masonry (lead caulking

will be paid for separately):

Providing and fixing on wall face unplasticised

Rigid PVC rain water pipes conforming to IS :

12.41 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for

thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised -

PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

12.42.3 Single tee with door

12.42.5 Bend 87.5 degrees

13.0 FINISHING

13.4S CEMENT PLASTER (IN COARSE SAND)

13.4 12 mm cement plaster of mix :

13.16S 6MM CEMENT PLASTER

13.16 6 mm cement plaster of mix :

Applying priming coats with primer of approved

13.85 brand and manufacture, having low VOC (Volatile

Organic Compound ) content.

13.88 Removing white or colour wash by scrapping and Sqm 233 16.35 3809.55

sand papering and preparing the surface smooth

including necessary repairs to scratches etc.

Distempering with 1st quality acrylic distember

(Ready mix) having VOC content less than 50

grams/ litre of approved brand and manufacture

to give an even shade :

14.0 REPAIRS TO BUILDING

Repairs to plaster of thickness 12 mm to 20 mm

in patches of area 2.5 sq.meters and under,

including cutting the patch in proper shape,

14.1 raking out joints and preparing and plastering the

surface of the walls complete, including disposal

of rubbish to the dumping ground, all complete

as per direction of Engineer-in-Charge.

23 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) Sqm 50 462.3 23115

15.0 DISMANTLING AND DEMOLISHING

Demolishing brick work manually/ by mechanical

means including stacking of serviceable material

15.7 and disposal of unserviceable material within 50

metres lead as per direction of Engineer-in-

Dismantling C.I. or asbestos rain water pipe with

15.42 fittings and clamps including stacking the

material within 50 metres lead :

17.0 SANITARY INSTALLATIONS

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

Providing and fixing Stainless Steel A ISI 304

(18/8) kitchen sink as per IS:13983 with C.I.

brackets and stainless steel plug 40 mm,

including painting of fittings and brackets,

cutting and making good the walls wherever

17.10.2 Kitchen sink without drain board

Providing and fixing P.V.C. low level flushing

cistern with manually controlled device (handle

lever) conforming to IS : 7231, with all fittings

and fixtures complete.

Providing and fixing solid plastic seat with lid for

pedestal type W.C. pan complete :

17.22B Providing and fixing CP Brass Single lever Each 10 6119.15 61191.5

telephonic wall mixer of quality & make as

approved by Engineer in charge. (a) 15 mm

Providing and fixing P.V.C. waste pipe for sink or

17.28 wash basin including P.V.C. waste fittings

17.28.1 Semi rigid pipe

17.33 Providing and fixing 600x120x5 mm glass shelf Each 10 942.15 9421.5

with edges round off, supported on anodised

31 aluminium angle frame with C.P. brass brackets

and guard rail complete fixed with 40 mm long

screws, rawl plugs etc., complete.

17.34 Providing and fixing toilet paper holder :

Providing and fixing PTMT towel rail complete

with brackets fixed to wooden cleats with CP

brass screws with concealed fittings arrangement

of approved quality and colour.

17.73.2 600 mm long towel rail with total length of 645 Each 10 600.35 6003.5

33 mm, width 78 mm and effective height of 88 mm,

weighing not less than 190 gms.

17.75 Providing and fixing PTMT 15 mm Urinal spreader Each 10 92.75 927.5

34 size 95x69x100 mm with 1/2" BSP thread and

shapes, weighing not less than 60 gms.

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing

18.7 the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints

complete as per direction of Engineer in Charge.-

Internal work - Exposed on wall

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing. This includes

18.8 jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases

and making good the same including testing of

joints complete as per direction of Engineer in

Charge, Concealed work, including cutting

chases and making good the wall etc.

Providing and fixing G.I. pipes complete with G.I.

18.12 fittings including trenching and refilling etc.-

18.15S BRASS FITTINGS

Providing and fixing gun metal gate valve with

C.I. wheel of approved quality (screwed end) :

Providing and fixing uplasticised PVC connection

pipe with brass unions :

Providing and fixing C.P. brass shower rose with

15 or 20 mm inlet :

18.31S C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES

18.48 Providing and placing on terrace (at all floor Litre 20000 9.7 194000

levels) polyethylene water storage tank, IS :

12701 marked, with cover and suitable locking

arrangement and making necessary holes for

inlet, outlet and overflow pipes but without

fittings and the base support for tank.

18.49S C.P. BRASS FITTINGS

Providing and fixing C.P. brass bib cock of

approved quality conforming to IS:8931 :

Providing and fixing C.P. brass long body bib cock

18.51 of approved quality conforming to IS standards

and weighing not less than 690 gms.

21.0 ALUMINIUM WORK

Providing and fixing aluminium work for doors,

windows, ventilators and partitions with extruded

built up standard tubular sections/ appropriate Z

sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with

dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at

top, bottom and sides with required EPDM

21.1 rubber/ neoprene gasket etc. Aluminium sections

shall be smooth, rust free, straight, mitred and

jointed mechanically wherever required including

cleat angle, Aluminium snap beading for glazing /

paneling, C.P. brass / stainless steel screws, all

complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing,

paneling and dash fasteners to be paid for

21.1.1 For fixed portion

21.1.1.1 Anodised aluminium (anodised transparent or Kg 70 433.95 30376.5

47 dyed to required shade according to IS: 1868,

Minimum anodic coating of grade AC 15)

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

For shutters of doors, windows & ventilators

including providing and fixing hinges/ pivots and

making provision for fixing of fittings wherever

required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid

for separately)

21.1.2.1 Anodised aluminium (anodised transparent or Kg 100 531.8 53180

48 dyed to required shade according to IS: 1868,

Minimum anodic coating of grade AC 15)

Providing and fixing 12 mm thick prelaminated

particle board flat pressed three layer or graded

wood particle board conforming to IS: 12823

Grade l Type ll, in panelling fixed in aluminum

doors, windows shutters and partition frames

with C.P. brass / stainless steel screws etc.

complete as per architectural drawings and

directions of engineer-in-charge.

21.2.1 Pre-laminated particle board with decorative Sqm 50 965.1 48255

49 lamination on one side and balancing lamination

Providing and fixing glazing in aluminium door,

window, ventilator shutters and partitions etc.

with EPDM rubber / neoprene gasket etc.

21.3 complete as per the architectural drawings and

the directions of engineer-in-charge . (Cost of

aluminium snap beading shall be paid in basic

21.3.1 With float glass panes of 4.0 mm thickness Sqm 30 1019.8 30594

(weight not less than 10kg/sqm)

22.0 WATER PROOFING

22.5 Providing and laying water proofing treatment in Sqm 166 516.6 85755.6

sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing

cement compound consisting of applying : (a)

First layer of slurry of cement @ 0.488 kg/sqm

mixed with water proofing cement compound @

0.253 kg/ sqm. This layer will be allowed to air

51 cure for 4 hours. (b) Second layer of slurry of

cement @ 0.242 kg/sqm mixed with water

proofing cement compound @ 0.126 kg/sqm. This

layer will be allowed to air cure for 4 hours

followed with water curing for 48 hours. The rate

includes preparation of surface, treatment and

sealing of all joints, corners, junctions of pipes

and masonry with polymer mixed slurry.

26.0 NEW TECHNOLOGIES AND MATERIALS

26.28S REPAIR AND REHABILITATION ITEMS

Chipping of unsound/weak concrete material

from slabs, beams, columns etc. with manual

Chisel and/ or by standard power driven

percussion type or of approved make including

26.28 tapering of all edges, making square shoulders of

cavities including cleaning the exposed concrete

surface and reinforcement with wire brushes etc.

and disposal of debris for all lead and lifts all

complete as per direction of Engineer-In-Charge

Cleaning of reinforcement from rust from the

reinforcing bars to give it a total rust free steel

surface by using alkaline chemical rust remover

of approved make with paint brush and removing

loose particles after 24 hours of its application

with wire brush and thoroughly washing with

water and allowing it to dry, all complete as per

direction of Engineer-In-Charge.

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

Providing, mixing and applying bonding coat of

approved adhesive on chipped portion of RCC as

p e r specifications and direction of Engineer-In-

charge complete in all respect.

26.31.1 SBR Polymer (@10% of cement weight) modified Sqm 50 117.75 5887.5

cementitious bond coat @ 2.2 kg cement per

sqm of surface area mixed with specified

proportion of approved polymer

Providing, mixing and applying SBR polymer (of

approved make) modified Cement mortar in

proportion of 1:4 (1 cement: 4 graded coarse

sand with polymer minimum 2% by wt. of

cement used) as per specifications and directions

of Engineer-in-charge.

26.73S PREFAB/PRECAST TECHNOLOGY

Providing and fixing factory made single

extruded WPC (Wood Polymer Composite) solid

plain flush door shutter of required size

comprising of virgin polymer of K value 58-60

(Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/wheat

husk) and non toxic additives (maximum toxicity

index of 12 for 100 gms) having minimum

density of 650 kg/cum and screw withdrawal

strength of 1800 N (Face) & 900 N (Edge),

26.87 m i n i m u m compressive strength 50 N/mm2,

modulus of elasticity 850 N/mm2 and resistance

to spread of flame of Class A category with

property of being termite/borer proof,

water/moisture proof and fire retardant and

fixing with stainless steel butt hinges of required

size with necessary full body threaded star

headed counter sunk S.S screws, all as per

direction of Engineer-In- Charge. (Note: stainless

steel butt hinges and necessary S.S screws shall

be paid separately)

Schedule Schedule 06-CSMT-Repairs to the damaged strom water drainage line near PF No-10 at CSMT.

Item- 06 Part D- DSR Item.

S No. Item No Description of Item Unit Qty Rate Amount

1.0 CARRIAGE OF MATERIALS

By Mechanical Transport including

loading,unloading and stacking

1.1.18 Disposal of moorum/building rubbish/ malba/ cum 447 411.3 183851.1

similar unserviceable, dismantled or waste

material by mechanical transport including

1 loading, transporting, unloading to approved

municipal dumping ground for lead upto 10 km

for all lifts, complete as per directions of

Engineer-in-charge.

2.0 EARTH WORK

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well

2.7 as 10 sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and

lift upto 1.5 m, as directed by Engineer-in-

Open timbering in trenches including strutting

2.20 and shoring complete (measurements to be

taken of the face area timbered):

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

5 2.20.2 Depth exceeding 1.5 m but not exceeding 3 m Sqm 150 76.4 11460

2.31 Clearing jungle including uprooting of rank Sqm 600 14.5 8700

vegetation, grass, brush wood, trees and saplings

of girth up to 30 cm measured at a height of 1 m

above ground level and removal of rubbish up to

a distance of 50 m outside the periphery of the

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement concrete

4.1 of specified grade excluding the cost of centering

and shuttering - All work up to plinth level :

4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived cum 41 7365.15 301971.15

from natural sources : 4 graded stone aggregate

20 mm nominal size derived from natural

Centering and shuttering including strutting,

propping etc. and removal of form work for :

8 4.3.1 Foundations, footings, bases for columns Sqm 30 307.95 9238.5

5.0 REINFORCED CEMENT CONCRETE

5.1S CAST IN SITU

Providing and laying in position specified grade of

reinforced cement concrete, excluding the cost of

centering, shuttering, finishing and

reinforcement - All work up to plinth level :

5.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived cum 2 7945.65 15891.3

from natural sources : 4 graded stone aggregate

20 mm nominal size derived from natural

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. for Sqm 5 307.95 1539.75

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete upto plinth

6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non

6.1 modular) bricks of class designation 7.5 in

foundation and plinth in:

10.0 STEEL WORK

10.2 Structural steel work riveted, bolted or welded in Kg 4500 111.95 503775

built up sections, trusses and framed work,

13 including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer

13.0 FINISHING

CEMENT PLASTER WITH A FLOATING COAT OF

Cement plaster 1:3 (1 cement: 3 coarse sand)

finished with a floating coat of neat cement.

13.44S EXTERIOR FINISHING

Finishing with Deluxe Multi surface paint system

13.48 for interiors and exteriors using Primer as per

manufacturers specifications :

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

13.48.3 Painting Steel work with Deluxe Multi Surface Sqm 300 140.05 42015

Paint to give an even shade. Two or more coat

15 applied @ 0.90 ltr/10 sqm over an under coat of

primer applied @ 0.80 ltr/10 sqm of approved

brand and manufacture

15.0 DISMANTLING AND DEMOLISHING

Demolishing cement concrete manually/ by

mechanical means including disposal of material

within 50 metres lead as per direction of

Engineer - in - charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c cum 41 1239.6 50823.6

equivalent design mix)

15.3 Demolishing R.C.C. work manually/ by cum 2 2928.1 5856.2

mechanical means including stacking of steel

17 bars and disposal of unserviceable material

within 50 metres lead as per direction of

Engineer - in- charge.

Demolishing brick work manually/ by mechanical

means including stacking of serviceable material

15.7 and disposal of unserviceable material within 50

metres lead as per direction of Engineer-in-

Demolishing stone rubble masonry manually/ by

mechanical means including stacking of

15.9 serviceable material and disposal of

unserviceable material within 50 metres lead as

per direction of Engineer-in-charge :

Dismantling C.I. pipes including excavation and

refilling trenches after taking out the pipes,

manually/ by mechanical means breaking lead

15.45 caulked joints, melting of lead and making into

blocks including stacking of pipes & lead at site

within 50 metre lead as per direction of Engineer-

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes

jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling & testing of

joints complete as per direction of Engineer in

Charge.-External work

Providing and fixing G.I. pipes complete with G.I.

18.12 fittings including trenching and refilling etc.-

18.59S AIR VALVE & WATER METER (BULK TYPE)

Providing and laying S&S Centrifugally Cast

18.72 (Spun) / Ductile Iron Pipes conforming to IS :

26 18.72.1 100 mm dia Ductile Iron Class K-7 pipes Metre 200 1121.1 224220

27 18.72.3 200 mm dia Ductile Iron Class K-7 pipes Metre 50 1975.95 98797.5

19.0 DRAINAGE

Extra for depth beyond 45 cm of brick masonry

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

Providing and laying Non Pressure NP-4 class

(Heavy duty) R.C.C. pipes including collars/spigot

19.36 jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand)

including testing of joints etc. complete

26.0 NEW TECHNOLOGIES AND MATERIALS

26.41S NEW TECHNOLOGY ITEMS

Providing and laying factory made Precast

concrete solid blocks of 200 mm thickness of

grade M10 made of C&D waste from approved

manufacturer in foundation and plinth in:

Item Breakup - 01-CSMT-Waterproofing to relay room at PF-07 KYN end at CSMT.