PROVN OF RCCBO AND SPD IN EM SYSTEM OF BLDG NO P-22 AT HQ DGIS UNDER AGE E/M AND CERTAIN MINOR WORKS UNDER AGE B/R-II OF GE (SOUTH) DELHI CANTT-10

Amount

S&F in replacement sheet metal enclosure MCB DB IP-43 (IK-09) double door bus bar neutral link earth bar and din rail vertical into 4 row of 14 modules including connection of existing electrical wiring/LT cable with suitable copper thimble complete all as specified and as directed. Make : Legrand Cat Part No 507707 or Equivalent Cat Part of Eaton/GE.

S&F in replacement MCB, FP, 63 Amps, C-Curve, 10KA including connection of existing electrical wiring/LT cable with suitable copper thimble complete all as specified and as directed. Make : Legrand Cat Part No : 408702 or Equivalent Cat Part of Eaton/GE

S&F SPD, Class II (T2), 20kA per pole, TPN including connection of existing electrical wiring/LT cable with suitable copper thimble complete all as specified and as directed. Make : LegrandCat Part No : 412223 or Equivalent Cat Part of Eaton/GE

S&F in replacement MCB, FP, 25 Amps, C-curve, 10kA required with SPD including connection of existing electrical wiring/LT cable with suitable copper thimble complete all as specified and as directed. Make : Legrand Cat Part No : 408698 or Equivalent Cat Part of Eaton/GE.

S&F RCCB, DP, 63Amps, 100 MA including connection of existing electrical wiring/LT cable with suitable copper thimble complete all as specified and as directed. Make : Legrand Cat Part No : 411858 or Equivalent Cat Part of Eaton/GE.

S&F in replacement of MCB, SP, 06-32 Amps, 240 Volts, 10kA, C-Curve including connection of existing electrical wiring/LT cable with suitable copper thimble complete all as specified and as directed. Make : Legrand Cat Part No : 408587-95 or Equivalent Cat Part of Eaton/GE.

S&F in replacement MCCB, FP, 125 Amps, 36 kA, DPX3, 160, thermal magnetic protection with Ics=100% Icu including connection of existing electrical wiring/LT cable with suitable copper thimble complete all as specified and as directed. Make : Legrand Cat Part No : 420096 or Equivalent Cat Part of Eaton/GE.

Cutting holes in brick walls built in cement mortar or cement lime mortar exc half brick but not exc one brick complete alll as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges or landings, steps, cills, sunshades, shelves, lintel etc and cutting in chases for concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth complete alll as specified and as directed.

Excavating in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling in and ramming earth in layers not exc. 25cm including watering & removing surplus soil to a distance not exc. 50m & making good the surface in any type of soil complete all as specified and as directed.

M&L for Cement concrete (1:4:8), Type D2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete etc complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer, cleats etc complete using ERW or induction butt welded tubes confirming to IS: 1161-1979 grade st - 240 complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer including preparation of new steel surfaces of any description, not otherwise described , over 10 cm width or girth, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.

Demolition of brick works built in cement mortor complete all as specified and as directed.

M & L for cement concrete 1:3:6 type C2, using 40mm graded stone aggregate as in foundations, filling and mass concrete etc complete all as specified and as directed.

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and with hexagonal nut of exc 5 cm length with dia of shanis 11 to 15 mm etc complete all as specified and as directed.

S&F framed work as in doors, gates of angle fe -410 gde E 250 qureed section with gussed plates complete drilled or welded to be prepared for hanging or sliding with and including either hooks and hinges complete all as specified and as directed.

M&L for applying 2 coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces exc 10 cm width or girth complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm but n.exc. 2 Sqm each incl removing from site complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification, drawing etc complete all as specified and as directed..

Surface excavation not exc 30 cm deep and averaging 15 cm thick and getting out in soft/loose soil complete all as specified and as directed.

M&L for cement concrete 1:4:8, Type D2, using 40 mm graded stone aggregate, 100 mm thick, as in sub-base and similar works etc, complete all as specified and as directed.

M&L for cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate as in holdfasts, coping on edges etc including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork etc, complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block of any colour, shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over and including 50mm thick sand cushioning and joints grouted in Cement Mortar 1:4 finished smooth complete all as specified and as directed.

S&F MS work as in Y shape angle as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc in mild steel conforming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and as directed

S&F punched tape concerntina coil (PTTC) 610m dia having 50 turns and approx weight 8.75Kg+5% and stretches to cover a distance 5-7 meter over Y shape MS section incl necessary binding wire etc complete all as specified and as directed.

Demolition of reinforced cement concrete of any discription and in any position including cutting of reinforcement from adjoining RCC component to faciliate demolition complete all as specified and as directed.

S&F 110 mm dia UPVC pipes Type 'A', single socketed, in any length with rubber ring joints, fixed to walls including cutting/making holes into brick wall to insert the 110mm dia UPVC bend and making good to brick wall hole in CM 1:4 complete all as specified and as directed.

S&F 110mm dia UPVC (SWR) Bends/Tee, type ‘A’ (any radius) complete all as specified and as directed.

S&F holder bat clamps 100mm bore made out of 50X 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and as directed.

Note :- (i) The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender. (ii) If any item of same description in nature is found to be entered as "double in BOQ" and the bidder quotes different rates against same item, then the rate quoted on lower side shall be applicable and higher rate will not be allowed to be paid in any circumstances. No claim on this account shall be entertained on a later date.

M/S Parmod Johar (BID ID -3104401)

P R Constructions (BID ID -3118459)